1-Dust_Bond_Tech_Data_page_1.pdf
PDF 136 KB Posted
- Attached to
- Competitive Selection OH|DOT101L26-5
- Contract number
- DOT101L26-5
- Issued by
- Ohio
About this file
This technical data sheet details the specifications for DUST BOND®, a dust suppressant and soil stabilizer product manufactured by D & D Emulsions, Inc., located in Mansfield, Ohio. The document provides a comprehensive overview of the product's technical properties, key features, and intended uses for dust control on unpaved surfaces.
DUST BOND® is an environmentally friendly concentrate designed to suppress fugitive dust on unpaved roadways, haul roads, and parking lots, with applications in surface stabilization and erosion prevention. The product is characterized by its ability to agglomerate fine particles, improve compaction, and prevent water erosion. Key features include being non-flammable, non-volatile, non-corrosive, and non-hazardous. The technical specifications indicate a yellow emulsion with a weight of 8.2 lbs per U.S. gallon, a positive particle charge, and a recommended application rate of 1 gallon per square yard when diluted 7 parts water to 1 part DUST BOND®. The product is suitable for use in ambient temperatures over 40°F and has a cure time of less than one hour.
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
T E C H N I C A L D A T A
DUST BOND®
DUST BOND® is a high performance dust suppressant and soil stabilizer. It has been specially formulated to replace the recently prohibited waste oils and by-products that were once used as dust suppressants and harmed the environment. DUST BOND® contains only virgin materials and is manufactured in a totally modern facility to insure consistent high quality and twelve month availability. DUST BOND® is sold and shipped as a concentrate to be diluted with water prior to use.
Manufacturer
D & D Emulsions, Inc.
P.O. Box 1706 270 Park Avenue East Mansfield, OH 44901 Phone: (419) 522-9440 Fax: (419) 522-8606
Key Features:
• Environmentally friendly
• Improves worker safety and health conditions
• Lowers equipment maintenance expense
• Clean result – not gooey
• Little or no traffic interruption
• Accumulative build up
• Non-flammable
• Non-volatile
• Non-corrosive
• Non-hazardous
• Not a waste by-product
• Safe
• Cost effective
Uses
DUST BOND® is designed to economically suppress fugitive dust on unpaved roadways, haul roads, and parking lots. It is an effective surface stabilizer that prevents rain and wind erosion of storage piles and newly graded surfaces before protective ground cover can be established.
DUST BOND® works by agglomerating the dusty fine particles into aggregate too large to become airborne. DUST BOND® is diluted with water to prepare it for spraying. This water is the matrix that carries the resin globules below the surface. Compaction is improved as the resinous material coats the aggregate and binds the small particles forming a solid mass.
DUST BOND® treated surfaces shed water which prevents erosion, potholes, and rutting. In northern climates, freeze-thaw damage from water saturation is averted.
SPECIFICATIONS AND GENERAL PROPERTIES
EMULSION PROPERTIES
Color Weight per U.S. Gal.
Particle Charge
Residue by evaporation
Viscosity @
25°C SFS
Sieve Test
Yellow 8.2 lbs. Positive 60 - 65% 12 to 35 .1
NORMAL APPLICATION
Normal Application Rate when diluted 7 water: 1DB
Cure Time Application Temperature
1 gallon per square yard dilute
Less than 1 hr. Ambient over 40°F
RESIDUE PROPERTIES
Asphaltenes Specific Gravity
Flash point, COC
Viscosity @ 100°C cSt
Zero 1.01 204°C minimum 14 to 20
Copyright© 2001 D & D Emulsions, Inc.
D & D Emulsions, Inc., 270 Park Avenue East, P.O. Box 1706, Mansfield, OH 44901
Phone: (419)522-9440 Fax: (419)522-8606 ddemulsionsinc.com
File details come from the government source that posted it. Updated .