1-Dust_Bond_Specs.pdf

23 KB Posted

Attached to
Competitive Selection OH|DOT101L26-5
Contract number
DOT101L26-5
Issued by
Ohio

About this file

Written by GovTribe AI ·

This document is a technical specification sheet for Dust Bond®, a dust control agent produced by D & D Emulsions, Inc., located in Mansfield, Ohio. The specification sheet details the technical parameters and testing methods for the product, including requirements for dust control agent characteristics and base chemical properties, as defined by ASTM and AASHTO testing standards.

The specification sheet provides comprehensive technical details for the Dust Bond® product, including precise measurements for key properties such as particle charge test (positive), residue percentage (60-65%), viscosity at 25°C (12-35 SFS), flash point (204°C), saturated hydrocarbons (max 15.6%), specific gravity (1.01), and viscosity at 100°C (14-20 cSt). The document was last revised on 06/21/13 and supersedes a previous version from 02/02/06, indicating ongoing product specification updates. Contact information for D & D Emulsions is provided, including their address, phone number, fax, and email for potential inquiries or orders.

View the file

Other files

File Type Posted
1-101LPricing_26_2025.xls XLS spreadsheet
1-2022-01-04_SDS_US_-_C-23.pdf PDF
1-Cyc_ME_Tech_Data_Page_1.pdf PDF
1-DB_Safety__Health__Envir._page_3.pdf PDF
1-EPR-1_Tech_Data_page_2.pdf PDF
101L-26.pdf PDF
101L__26__recommend.pdf PDF
1-2022-01-04_SDS_US_-_DUST_BOND.pdf PDF
1-C-23_Brochure_5_26_11.pdf PDF
1-C-23_Specs.pdf PDF
1-C-23_Tech_data_page_2.pdf PDF
1-Cyc_ME_Tech_Data_Page_3.pdf PDF
1-DB_Safety__Health__Envir._page_2.pdf PDF
1-Dust_Bond_Tech_Data_page_1.pdf PDF
1-2022-03-01_SDS_US_-_CYCLOGEN__ME__1_.pdf PDF
1-Cyc_ME_Tech_Data_Page_2.pdf PDF
1-DB_Safety__Health__Envir._page_1.pdf PDF
1-Dust_Bond_Tech_Data_page_2.pdf PDF
1-EPR-1_Tech_Data_page_1.pdf PDF
1-EPR-1_Tech_Data_page_3.pdf PDF
1-Affirmation_20250321145336.pdf PDF
1-C-23_Tech_data_page_1.pdf PDF
1-C-23_Tech_data_page_3.pdf PDF
1-Cyclogen_ME_Spec.pdf PDF
1-EPR-1_Prime_Specs.pdf PDF
1-EPR-1_SDS_US.pdf PDF
1-New_Cyclogen_Brochure.pdf PDF
1-Proposal___1-prop_answer.xls XLS spreadsheet
Signature__4___1___002_.pdf PDF
Show all 29

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DUST BOND®

SPECIFICATIONS

DUST CONTROL AGENT

Particle Charge Test

Residue, %w2

Viscosity @ 25°C, SFS

TEST METHOD

ASTM AASHTO

D-244 T-59

REQUIREMENTS

Min. Max.

Positive

60 65

12 35

1Test procedure with ASTM except that distilled water shall be used in place of 2%w sodium oleate solution.

2ASTM D-244 Evaporation Test for percent of residue is modified by heating 50 gram sample to 149°C (300°F) until foaming ceases, then cool immediately and calculate results.

BASE

Asphaltenes, %w

Flash Point, COC, °C

Saturated Hydrocarbons, %w

Specific Gravity

Viscosity @ 100°C cSt

Total Acid Number

TEST METHOD

ASTM AASHTO

D-2006-7 ----

D-92 T-48

D-2006-70 ----

D-1298 T-277

D-445 ----

D-664 ----

REQUIREMENTS

Min. Max.

204 ----

---- 15.6

---- 1.01

14 20

---- 0.5

D & D EMULSIONS, INC., 270 Park Avenue East, P.O. BOX 1706, MANSFIELD, OH 44901

PHONE: (419) 522-9440 FAX: (419) 522-8606

ddemulsionsinc@outlook.com

Supersedes 02/02/06

Revised 06/21/13

File details come from the government source that posted it. Updated .