1. Statement of Work (SOW).pdf

Boom Mower

DESCRIPTION/WORK STATEMENT/SPECIFICATION

1. Scope. This specification establishes the requirement for one (1) twenty-six foot Atmax

MowerMax Boom Mower or equivalent, if salient characteristics can be provided, to Anniston Army Depot, Anniston, Alabama. The equipment shall be provided by the contractor with all functionality, capabilities and features as described herein. The contractor shall provide all resources necessary to meet the specifications, manufacture, deliver, and demonstrate functional operation of the equipment. The contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.

2. Order of Precedence. In the event of a conflict between the text of this equipment specification and the references cited herein, the more stringent regulation or specification shall take precedence, unless a specific exception to this order of precedence is noted in this equipment specification. Nothing in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained by the Government.

3. References. UFGS-01 35 26, Safety and Occupational Health requirements for the protection of Contractor and Government personnel, property, and resource; American National Standards Institute (ANSI) B11/STD B11.0, standard for Safety of Machinery – General Requirements and Risk Assessment. International Organization for Standards (ISO) 3471:2008 Earth-moving machinery- Roll-over protective structures ISO 3449 Earth-moving machinery — Falling-object protective structures

4. Requirements. This specification provides the requirements for one (1) twenty-six foot MowerMax Boom Mower or equivalent. The boom mower shall be a product produced as the manufacturer's current production model.

5. Power Unit Specifications

• Engine: Tier 4F 3.8QSF 130 Horsepower (HP) minimum Turbo Diesel

• Cooling System (Engine & Hydraulic): Horizontally-mounted Radiator/CAC/Oil

Cooler with High Flow Fan & Reversing Cleanout System

• Transmission: Two Speed Closed Loop Hydrostatic with Double Foot Pedal

Controls

• Drive Train & Steering: Permanent 4-Wheel Drive with 4-Wheel Steering & 3 Steering Modes

• Differential Lock: 45% Limited Slip on Front Axle & 100% Operator-controlled Rear Locking Rear Axle

• Parking Brake: Standard (Spring Applied Hydraulically Released (SAHR)) Electric over Hydraulic

• Service Brake: Standard Foot Pedal Controlled

• Tires: Minimum- 460/70-R24 Radial with Multiuse Tread or 550/45-22.5 22 Ply

Flotation with Lug Tread

• Ground Speed: 0-8 Miles Per Hour (MPH) minimum Work Mode, 0-25 MPH

Travel Mode minimum

6. Boom Arm Specs

• Boom Controls: Multifunction, Electric Over Hydraulic Joystick

• Boom Length: 26 Feet (ft) minimum

• Boom Rotation: 180 Degrees with Helical Actuator with Cross Port Relief

• High Flow Hydraulics to Boom Attachments: Closed Loop Hydrostatic Pump with

30GPM @ 5000 Pounds per Square Inch (psi) minimum

7. Front Lift Arm Specs

• Lift Capacity: 2500 pounds (lbs) minimum

• High Flow Hydraulics to Attachments: Closed Loop Hydrostatic Pump with

30GPM @ 5000psi minimum

8. General Specs

• Width with Boom Inch (In.) Stow: 100 in. minimum

• Length with Boom in Stow (No Boom Attachments): 236 in. minimum

• Height (To Top of Cab): 112 in. minimum

• Weight (with 24 ft. boom & no attachments): 19,500 lbs. minimum

• Diesel Fuel Tank Capacity: 38 Gallons minimum

• DEF Tank Capacity: 5 Gallons minimum

• 90 Degree Deck Swivel

9. CAB & Safety Features

• Air Ride Suspension Seat with Back Rest, Lumbar, Tilt with Operator Pressure Switch & Seatbelt with Switch

• Tilt Steering Column with Telescoping Steering Wheel with Knob.

• Easy to View, Adjustable 7in minimum Color Display with All Gauges and

Warning Signals

• 6.2in minimum Color AM/FM/CD Stereo

• 12 Amber/White Light Emitting Diode (LED) Mini Flashers on all 4 Sides

• 2 - SAE Class 1 LED Strobes and 1 - LED Directional Control Bar on Rear on Cab

• Backup Alarm

• 2 Reflective SMV Diamonds and over 28 feet of Reflective DOT tape

• Certified ROPS – ISO 3471 & FOPS – ISO 3449

10. Attachments

• 60 inch minimum Rotary Deck

• 50 inch minimum Fecon Mulcher with optional 180 Degree Swivel

• 84 inch minimum Hydraulic Angle Broom Attachment

• Universal Quick Attach Attachment Mounting Mechanism

• Additional Counter Weight

11. Assembly. The Contractor shall be responsible for assembly of the equipment.

Equipment shall be delivered assembled and ready for use.

12. Conformance. The equipment shall meet the requirements of this specification and conform to the manufacturer’s own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to, at any time during the contract period, require proof of such conformance or to inspect the equipment to determine compliance with the requirements of this specification.

13. Documentation.

• Manuals. Two (2) Hardcopies and two (2) digital copies of Operator’s, Parts and

Service Manuals shall be furnished by the contractor to include operating instructions explaining preventive maintenance procedures, methods of checking the equipment for normal safe operation and procedures for safely starting and stopping the system manually to include but not limited to Lock-out/Tag-out procedures. The Operator Manual shall include the step-by-step procedures required for equipment startup, operation and shutdown. Parts manuals are also to be included for this equipment. Service Manual must include factory recommended maintenance tasks and intervals associated with the equipment. All manuals are to be provided at time of delivery.

• Training Video. The contractor shall provide an operator training video showing the proper use of the equipment as well as any and all safety precautions that should be taken to ensure the safe and effective operation of this equipment.

14. Shipping & Delivery.

• Quote should include all freight and delivery charges.

• The Contractor shall be responsible for delivering the equipment to the Anniston Army Depot, 7 Frankford Avenue, Anniston, Alabama, 36201 Bldg.4, Commercial Construction Equipment Maintenance Shop.

• The Government will provide the required delivery date to the contractor at least 2 weeks in advance of that date. The Contractor must deliver the equipment within 5 business days of the delivery date. The required delivery date shall be between the dates of 1 October 2020 and 30 September 2021.

• The contractor shall provide shipping details to the Government no less than one

(1) week prior to shipment.

15. Acceptance Testing and Verification. The equipment shall be tested and verified by a government representative after delivery to Anniston Army Depot.

16. Final Acceptance. The Government will issue a final acceptance only after the contractor successfully completes all requirements herein. Final acceptance will be at Anniston Army Depot. Upon acceptance of all items described above, the contractor shall submit a completed DD Form 250 for signature by the government representative, as final acceptance of the equipment required by this specification (see solicitation for form & instructions).

17. Warranty. The boom mower shall be covered by the manufacturer’s one (1) year bumper to bumper warranty for this type of equipment and shall begin the day following Government issuance of final acceptance of the equipment per paragraph 18.

The equipment’s mainframe must be warrantied to no less than five (5) years. Hydraulic motors and pumps must be warrantied for no less than one (1) year. Drive axles shall be warrantied for no less than one (1) year. The engine shall be warrantied for no less than two (2) years. During the warranty periods, the contractor shall be responsible for all costs including parts and labor required to complete repairs of any defects in machine material, parts or workmanship. The warranty shall be written in the Anniston Army Depot’s name.