1. Statement of Work.pdf

CodeSource, LLC Laser IUID Marking System Repair and Training Statement of Work

1. Objective: Bring the three inoperable laser markers back operational and perform routine maintenance on one operable laser marker, thus averting the need to purchase replacement equipment.

2. Scope: The original equipment vendor, CodeSource, LLC, shall restore the three inoperable ACI Foilstar/ CodeSource Laser IUID marking systems at Anniston Army Depot (ANAD) to a fully mission capable condition, evaluate and perform routine maintenance on one laser marking system that is currently operable, and perform operator training.

3. Requirements:

3.1. The CodeSource, LLC support engineer shall evaluate equipment condition, troubleshoot equipment problems, and perform routine maintenance on four ACI Foilstar/ CodeSource Laser IUID marking systems:

• ACI Foilstar/ CodeSource DFL Ventus Marker fiber laser, Serial Number 1509VIIZB75-

• ACI Foilstar/ CodeSource DFL Ventus Marker fiber laser, Serial Number 1509VIIZB75-

• ACI Foilstar/ CodeSource DPL Nexus Marker fiber laser, Serial Number 0805N0170

• ACI Foilstar/ CodeSource DPL Fortis Marker, Serial Number 1306F0147.

3.2. The CodeSource, LLC support engineer shall upon performance of equipment evaluation and troubleshooting notify and consult with both the Contracting Officer and the ANAD Technical Point of Contact (POC) on equipment repair status, repair parts needed, and provide an estimate of total repair costs to include any shipping charges. Any unanticipated, additional costs to the Government shall be approved by the Contracting Officer before purchasing parts or performing services.

3.3. The CodeSource, LLC support engineer shall perform requisite repairs on the three inoperable ACI Foilstar/ CodeSource Laser IUID marking systems:

• ACI Foilstar/ CodeSource DFL Ventus Marker fiber laser, Serial Number 1509VIIZB75-

• ACI Foilstar/ CodeSource DPL Nexus Marker fiber laser, Serial Number 0805N0170

• ACI Foilstar/ CodeSource DPL Fortis Marker, Serial Number 1306F0147.

3.4. The CodeSource, LLC support engineer shall determine if any of the three inoperable marking systems are not repairable by swapping an accessible component onsite, and if so, shall send the equipment back to the Original Equipment Manufacturer (OEM), ACI Laser, in Germany for clean room refurbishment. The contractor is responsible for proper boxing and packing of the equipment as to ensure safe shipment back to the OEM.

3.5. The CodeSource, LLC support engineer shall perform testing, re-installation, and setup of any equipment that is removed for repair.

3.6. The CodeSource, LLC support engineer shall notify both the Contracting Officer and the ANAD Technical Point of Contact (POC) of any needed return site visit(s) to Anniston Army Depot for completing the repairs.

3.7. The CodeSource, LLC support engineer shall conduct training for any new operators, as time allows.

4. Scope Changes: The contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.