1. Medal of Honor Memorial Updated.docx

Request to update the current memorial with a new inlay and base located on Kunsan AB with a new plaque that include additional names. Consists of furnishing all labor, equipment, materials, transportation and supervision necessary to perform all the work as indicated herein.

a. Remove the old inlay and replace with a new inlay consisting of the same material, finish and external dimensions to fit in the existing memorial.

b. New inlay shall contain the same text that is on the old inlay with the addition of three (3) new names added under the Vietnam portion. Names and additional information are in Table 2 below.

c. All text will begin from the top of the new inlay with a 1 inch margin from the upper edge and be centered and spaced to the same specifications of the old inlay.

d. The three (3) emblems located at the top of the old inlay will be moved to a new base construction added to the existing memorial.

e. The new constructed portion will be a masonry slab measuring 30 inches long and 8 inches wide centered at the base of the second step of the memorial on the side that contains the inlay.

f. The new masonry slab will slope down from a thickness of 4 inches to the edge of the existing base of the second step providing an angled surface.

g. The new sloped masonry slab will be finished to match the existing memorial with its own inlay that matches the material and finish of the larger one.

h. The three (3) emblems obtained from the old larger inlay previously removed from the memorial will be mounted in a centered and equally spaced manner on the inlay of the new sloped masonry slab construction.

i. Contractor will ensure all materials and supplies used are appropriate for preserving the structural integrity of the memorial and the modification attaches correctly.

j. See attached document “MoH Supporting Image” for a visual of requested work.

Table 2 – Names, Dates, Locations to be Added