1.a. SOW_Tunable Laser_rev.2026.07.24.pdf
PDF 136 KB Posted
- Attached to
- Tunable Wavelength Laser System
- Solicitation number
- FA860126Q0114
About this file
This is a Statement of Work for the procurement of a picosecond tunable laser system for the Air Force Institute of Technology (AFIT/EN) at Wright-Patterson Air Force Base, Ohio. The laser system will be used to calibrate hyperspectral sensors and perform laser spectroscopy to support remote sensing research funded by multiple government agencies including the National Air and Space Intelligence Center, the National Geospatial Intelligence Center, and the US Army Engineering Research and Development Center.
The required system must be tunable across the spectral range of 400–14,000 nanometers or greater, with tuning steps of 1 nanometer or less in the 410–1,150 nanometer range. Technical specifications include linewidths not exceeding 15 cm⁻¹, a pulse repetition rate of 50 Hz or higher, pulse widths under 1,000 picoseconds, and pulse energy of 1 micro-Joule or more across the spectral range. The contractor must provide all pump lasers, cables, power cords, control systems, and software necessary for operation on single-phase 110-volt, 60-Hz power. Additional deliverables include packaging, shipping, and delivery to AFIT with all necessary customs clearances, an original manufacturer warranty of one year or more, and on-site training by a factory-certified technician. The delivery must be completed within 6 months of contract award. The contractor is responsible for all transportation, storage, and on-site coordination of equipment delivery and setup. Payment is 100 percent upon completion of all requirements on a net 30 basis through the Wide Area Work Flow system.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - FA860126Q0114.pdf | ||
| Attachment 3. Reps and Certs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
Picosecond Tunable Laser Model
24 July 2026
BACKGROUND: A tunable laser system is required to provide a light source to calibrate hyperspectral sensors and to perform laser spectroscopy. Remote sensing is a key technology are of great interest to the DoD and other government agencies. At AFIT/ENP, the laser and optics program is equipped with $4M of world class remote sensing equipment. Currently these are calibrated using broadband sources. These sources cover part of the spectral range of our instruments well, but are not suitable for lower wavelength instruments, creating a significant challenge to calibrate these instruments. The broadband sources also provide less power in the proper wavelengths making calibration of high temperature targets like explosions and jet engine plumes inaccurate. Having this light source would significantly impact the research of several students funded by multiple sponsors including the National Air and Space Intelligence Center, the National Geospatial Intelligence Center, and the US Army Engineering Research and
Development Center. Better calibration will improv the quality of the students’ data and enable us to teach and have students practice state-of-the-art calibration techniques. Additionally, this laser system can produce high power picosecond pulses that allow student to use advanced laser spectroscopy techniques to further remote sensing research is atmospheric effects and source signatures. This provides another avenue to educate students on the latest spectroscopic techniques.
1.0. SCOPE: The purchase of the Picosecond Tunable Laser Model
2.0. REQUIREMENTS: This purchase is for a picosecond tunable wavelength system.
1. The laser system should be tunable over the spectral range 400 – 14,000 nm or more.
2. Tuning steps should less than or equal to 1 nm in the 410 – 1150 nm spectral range.
3. Linewidths should be less than or equal to 15 cm-1 over the spectral range.
4. Pulse repetition rate of 50 Hz or more.
5. Pulse width should be less than 1000 picoseconds.
6. Pulse energy 1 micro-Joule or more over the spectral range.
7. Include all pump lasers required.
8. Operate on single phase 110 Volt, 60 Hz power.
9. Include any required cables, power cords, control systems, and control software.
10. Provide packaging, shipping, and delivery to AFIT to include any required customs clearances and paperwork.
11. Provide an original manufacturer warranty for one year or more.
12. Provide on-site training by a factory certified technician.
3.0. Period of Performance: The vendor shall deliver and complete all requirements of this
Statement of Work no later than 6 months after contract award.
1. Contractor shall be responsible for transportation of all new products, loading, unloading, storage and all necessary movement from factory to final onsite set up.
2. The contractor Project Manager shall be responsible for on-site coordination of all deliveries of their product, to include access to and operation of any equipment needed for unloading and movement of materials or product necessary to complete all requirements of this Statement of Work.
3. Free from defects in material and workmanship, under normal and proper use in accordance with equipment user manual, for the period of time of one year after receipt.
3.1. Place of Performance:
Air Force Institute of Technology (AFIT/EN)
ATTN: Mr. Greg Smith
2950 Hobson Way, Building, #640 Room #265
Wright-Patterson AFB, OH 45433-7765
4.2 Payment: 100% payment upon completion of all requirements specified in this
Statement of Work. Payment shall be made on a net 30 basis. Invoices shall be submitted and paid through Wide Area Work Flow (https://wawf.eb.mil/).
File details come from the government source that posted it. Updated .