1.3 1301378966 SCOPE OF WORK (REDACTED).pdf
PDF 169 KB Posted
- Attached to
- Sole Source OEM "American Bureau of Shipping" - ABS Welding, Inspection & NDE Training Course
- Solicitation number
- N0040626Q0467
About this file
This is a Scope of Work (SOW) for an ABS Welding, Metallurgy, Inspection, and NDE Training Course to be delivered to SRF-JRMC Detachment Singapore employees.
The contractor shall develop and execute a five-day instructor-based training course scheduled for September 21-25, 2026, at Changi Naval Base in Singapore. The course will be delivered to a maximum of 20 students during normal working hours (0800-1700 local time, Monday through Friday), with two 10-minute breaks and a 45-60 minute lunch period daily. The contractor must provide experienced instructors with deep technical knowledge and recent hands-on experience in welding, metallurgy, inspection, and NDE; prior Department of Defense or U.S. Navy experience is preferred but not mandatory. Training content must address ten specific modules: Basics of Welding & Metallurgy, Steel Production and Mechanical Properties, Residual Stresses & Distortion, Weld Joint Geometry/Terminology/Sequence/Processes, ABS Rules for WPS & PQR, Filler Metals, Stainless and Aluminum Materials, Visual Inspection of Welding, Non-Destructive Evaluation, and Ship Fabrication Hull Construction. The contractor shall provide each participant with a comprehensive training guide, and ABS will issue Certificates of Completion to participants meeting 100% attendance requirements. Performance standards require 100% compliance with all Scope of Work requirements, measured by tracking certificate recipients and participant feedback. The government will furnish seating, tables, LCD projector, amplified sound system, whiteboard or flipchart, adequate lighting, writing materials, and other support equipment as needed.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4.0 26Q0467 SOL (REDACTED).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SCOPE OF WORK
FOR
ABS Welding, Metallurgy, Inspection, and NDE Training Course
1.0 SCOPE
The contractor shall provide an "ABS Welding, Metallurgy, Inspection, and NDE Training Course," as described in this Scope of Work, to SRF-JRMC Detachment Singapore employees. The contents should assist in developing competency in Welding, Metallurgy, Inspections, and Non-Destructive Evaluation (NDE) in sufficient detail for use by personnel and supervisors.
2.0 BACKGROUND
SRF-JRMC Detachment Singapore is comprised of a diverse workforce including United States Civil Service (USCS), local national, and United States Navy (USN) active-duty personnel. The command is seeking to improve the technical skills and competencies of its employees. Welding, Metallurgy, Inspection, and NDE competency is critically important as the course contents are directly relevant to the employees' daily maintenance and oversight duties. Gaining this knowledge will be directly beneficial to the employees and the execution of the command's ship repair mission.
3.0 PERFORMANCE REQUIREMENT/TASKING
3.1 Instructor Based Training
a. The contractor shall develop and execute training in the competency areas outlined below in
September 2026. The training session will be delivered to a maximum audience of twenty (20) students. The course will be held over five (5) consecutive normal working days (Monday through Friday) between the hours of 0800 – 1700 local time.
b. The contractor shall provide each participant with a comprehensive participant training guide.
ABS will issue a Certificate of Completion to participants who meet the course requirements (100% attendance).
3.2 Performance Goals and Course Content
The Contractor shall deliver training content that addresses the following specific modules:
• Basics of Welding & Metallurgy
• Steel Production and Mechanical Properties
• Residual Stresses & Distortion
• Weld Joint Geometry, Terminology, Sequence & Processes
• ABS Rules for WPS & PQR
• Filler Metals
• Stainless and Aluminum Materials
• Visual Inspection of Welding
• Non-Destructive Evaluation
• Ship Fabrication Hull Construction
3.3 Instructor Skills and Knowledge Required
a. The contractor shall provide appropriate and experienced instructor(s) who possess deep technical knowledge and recent hands-on experience in the fields of welding, metallurgy, inspection, and NDE.
b. Prior experience training or working within the Department of Defense (DoD) or U.S.
Navy environment is preferred but not mandatory.
4.0 PERFORMANCE REQUIREMENTS SUMMARY (PRS)
Task or Deliverable Performance Standard Acceptable Quality
Level (AQL) Surveillance
Method Performance
Measure
Scope of Work 3.0
Adherence to full requirements of paragraph 3.0 of Scope of Work
100% compliance in meeting Scope of Work 3.0 requirements
Tracking the number of participants who attained certificates upon completion
Feedback from participants;
verified 100% compliance in meeting delivery methods
5.0 PERIOD OF PERFORMANCE
21-25 September 2026 (One 5-day session).
6.0 PLACE OF PERFORMANCE
The training will be held at the SRF-JRMC Detachment Singapore facility located at Changi Naval Base, 210 Tanah Merah Coast Rd, Singapore 498805.
7.0 WORK/TRAINING HOURS
Training shall be performed between the hours of 0800 - 1700 per day. Two 10-minute breaks and a lunch period of 45-60 minutes are expected within this timeframe. The contractor instructor shall budget training hours accordingly to ensure all Scope of Work curriculum outcomes are achieved.
8.0 WORK ENVIRONMENT/PHYSICAL DEMANDS/GOVERNMENT FURNISHED
SUPPORT
SRF-JRMC Detachment Singapore will provide:
• Proper seating & tables with ample writing and working space
• One power point computer presentation LCD projector
• Amplified sound system to show videos through a laptop as needed
• One (1) whiteboard with markers or one (1) paper flipchart
• Adequate lighting, preferably adjustable
• Writing pads and pens/pencil for notes
• Any other specific support equipment that may be needed for the training
12.0 SRF-JRMC POINT OF CONTACTS (POC)
Technical POC:
Name:
Title:
Email:
Contract POC:
Name:
Title:
Email:
mailto:takeshi.ooguchi.ln@us.navy.mil
File details come from the government source that posted it. Updated .