Ship/HULL NO. Ship/HULL NAME ICN: Rev: Key Op:

LHA-7 USS TRIPOLI JON. 38DJ266201 AOl

TITLE:

Storage Locker in RAS Station 1-90-1-Q; replace

JOB SPECIFICATION

Anticipated Award Date: Production Completion Date: PREPARING ACTIVITY:

SASEBOPOP Start Date: POP End Date:

PREPARED BY:

Y. SUENAGA

CODE

H_SU

DATE

8/5/2026

APPROVED BY:

S.MURAKAMI

CODE

S225

CONCURRED BY:

S.MOROOKA ,1'L7

CODE

S231

ASSIST PLANNER'S NAME: CODE

ASSIST PLANNER'S NAME: CODE

ASSIST PLANNER'S NAME: CODE

DESCRIPTION:

JSN(S): DBOI -0539 CASREP#

S/F CONTACT: ZAVALA BM2 I AUSTRIA BMC CWP # CCNS #

1).

Approved by S300/S900 Date:7J AvI: 7J1

LWC:

Work Completed

S/Force: Rate: Date:

Ship Supt: Date: SRF CONTROL NO.:_________________________

WORK CERTIFICATION SIGNATURES

COMPLETION OF WORK REVIEW: BADGE NO.: SHOP/CODE: PHONE: DATE:

Sakura.Yamaguchi.ja Typewritten Text 09/11/2026

Sakura.Yamaguchi.ja Typewritten Text 12/18/2026

Sakura.Yamaguchi.ja Typewritten Text 10/13/2026

Sakura.Yamaguchi.ja Typewritten Text 01/29/2027

Sakura.Yamaguchi.ja Typewritten Text 1301402573

ShipIHULL NO. ShipIHULL NAME ICN: Rev: Key Op:

LHA-7 USS TRIPOLI JON. 38DJ266201 AOl

TITLE:

Storage Locker in RAS Station 1-90-1-Q; replace

1. SCOPE:

1.1 Title: Storage Locker in RAS Station 1-90-1--Q; replace

1.2 Location of Work:

1.2.1 Replenishment At Sea Station (1-90-1-Q)

1.3 Identification:

1.3.1 Quantity (2 EA), Storage Locker, 36 Inch Width by 36 Inch Deep by 72 Inch Height, Aluminum (RAS Locker Number One and 2 of 2.2), Located in 1.2.1

1.3.1.1 A Total of (44 SF) of Deck Surface in Each Storage

Locker Foundation, Including Each Storage Locker Foundation and Support Angle from Each Bulkhead

2. REFERENCES:

2.1 Standard Items (FY27)

2.2 571-6125053 Rev Fl, RAS Hangar Deck Station ARR & DET

2.3 640-7566072 Rev B, Furniture Schedule (Page 291 of 1945)

2.4 600-7565996 Rev C, Furniture, Furnishings NON 0/F Spaces MTG DET FR 89-97 2 DK to 03 LVL

2.5 803-5184286, Lockers, Workshop, Tool Stowage

2.6 610-1360509 Rev A, N.Y.N.S Type Plan Locker Assemblies & Workbench Units

2.7 610-1360511, N.Y.N.S Type Plan Locker Details

3. REQUIREMENTS:

3.1 Remove each existing storage locker listed in 1.3.1 for replacement, using 2.2 through 2.7 for guidance.

3.2 Accomplish the requirements of 009-032 of 2.1 including Table 2, One system out of Line One, 2, 4, Columns B, C, and E or Line 3, Columns B and E for each area listed in 1.3.1.1. using manufacturer's instruction for guidance.

SP-11)

3.2.1 Power tool clean each steel surface area to bare metal (SSPC-

Ship/HULL NO. Ship/HULL NAME ICN: Rev: Key Op:

LHA-7 USS TRIPOLI JON. 380J266201 AOl

TITLE:

Storage Locker in RAS Station 1-90-1-Q; replace

3.2.1.1 Power tool clean each narrow area to SSPC-SP-3 where

power tool in 3.2.1 cannot reach.

3.2.1.2 Hand tool clean each narrow area to SSPC-SP-2 where

power tool in 3.2.1.1 cannot reach.

3.3 Upon completion of the preservation work, install each new storage locker listed in 1.3.1 with each new fastening hole and new CRES fastener, using 2.2 through 2.7 for guidance.

3.3.1 Apply two layers of insulation tape (MIL-I-24391) to each faying surface of dissimilar metal.

3.4 Accomplish the requirements of 009-032 of 2.1 for cleaning and preservation of each new and disturbed surface to match surrounding areas.

(V) (G) "VERIFICATION"

3.5 Inspect and verify completion of this work. -S130

4. NOTES:

4.1 Initial Condition - The doors to storage locker were broken off. S/F requests SRF to replace storage lockers and conduct preservation and painting of area directly below the locker while it is removed.

5. GOVERNMENT FURNISHED MATERIAL (GFM):

5.1 Government Furnished Materials as follows.

MATERIAL LIST

MATERIAL LIST

M

QTY

ITEM PC REF I STOCK HAZ DOC REQDI PARA

NO. NO NO C DESCRIPTION NUMBER MAT NO. UNIT N

001 M LOCKER, WORKSHOP, TOOL 9B 7125 N 2/EA 3.3

STORAGE, 36W X 36"D X 72K,

LOCKER BODY: ALUMINUM, 0.125"

THK I.A.W NAVSEA DWG 803-

5184286. ASSEMBLY #104,

DIMENSION A: 36" WIDE,

DIMENSION B:72" HIGH,

DIMENSION C: 36" DEEP, DOUBLE

DOORS, LEVER HANDLE WITH

KEEPER, (4 EA) FIXED SHELVES

WITH EACH STIFFENER, FIXED

SOLID SUPPORTS,

002 M NUT, SELF-LOCKING, 318-16UNC-

9B 5310 014804186 N

6217B050

10/EA 3.3

3B, CRES316, P/N: MS17630-6C

003 M WASHER, FLAT FOR 3/8" BOLT,

9B 5310 013897976 N

6217B039 10/EA 3.3

CRES 316, FF=W=92. SX

Ship/HULL NO. Ship/HULL NAME I ICN: Rev: Key Op:

LHA-7 USS TRIPOLI JON 38DJ266201 AOl

TITLE:

Storage Locker in RAS Station 1-90-1-Q; replace

MATERIAL LIST

M

OTY

ITEM PC REF I STOCK HAZ DOC REQD/ PARA

NO. NO. NO C DESCRIPTION NUMBER MAT NO. UNIT NO

004 M SCREW, CAP, HEX HEAD, 3/8- 9B 5305 015607790 N 6217B040 1OIEA 3.3

16UNC-2AX 1-1/2"L, CRES 316,

P/N: M835307-364S316

005 M TAPE, INSULATION ELECTRICAL,

9B 5970 001475675 N

6217B041

2/EA 3.3

DIELECTRIC TAPE, 2"WX

0.008"THK, 36YD/RO, MIL-I-24391

006 M ANTISEIZE COMPOUND, MIL-T- 9B 8030 002921102 Y

6217B802

1/TU 3.3

22361,8 OZ/TU.

007 C ANGLE, STRUCTURAL, ANGLE, 2" 9B 9520 002774912 N

6217B051

20/FT -

X 2" X 3/16" THK, STEEL, ABS

GRADE A.

008 C SOUND CO, ACOUSTIC

90 5640 007565866 N

6217B053

1/BX -

BOARD,2"THKX2'WX 3'L, MIL-DTL-

32585

009 M WASHER, FLAT FOR 1/4" BOLT,

9B 5310 013917504 N

6217B042

10/EA

3.3

CRES 316, MS15795-811

010 M NUT, SELF-LOCKING, 1/4-2OUNC 9B 5310 013896996 N

6217B043

10/EA

3.3

3B, CRES 316, M517830-4C S316

011 C ACOUSTIC BOARD, INSULATION 90 5640 007565866 N

6217B044

1/BX

,2"THKX2'WX 3'L, MIL-DTL-32585

012 C INSULATION BOARD,1"THKX2'WX

905640008096312 N

6217B045

1/BX

3'L, MIL-DTL-32585 TYPE I

013 C TAPE, LAGGING,2"X5OYD/RL, MIL-

9B 8315 002671632 N

6217B046

1/RO

C-20079H

014 C CAP,ALUMI,SNAPFASTENER,

9B5325007377648 N

6217B047

1/HD

U/I :100EA/PG.

015 C ADHESIVE WHITE, 1GLJCN, MIL-A-

9B 8040 002738708 Y

6217B801

1/GL

3316C, CL-i