06 SPI.pdf
PDF 375 KB Posted
- Attached to
- REMANUFACTURED F-15 Canopy Initiator
- Solicitation number
- FA821322R3034
About this file
This document contains packaging and shipping requirements for munitions as well as details of a solicitation for the remanufacture of F-15 canopy initiators. The packaging section outlines standards for wood packaging materials used in shipments to prevent the spread of invasive species. It requires all wood lumber, pallets and containers be constructed from debarked wood treated at 56 degrees Celsius for 30 minutes. The solicitation seeks proposals for the remanufacture of F-15 canopy initiators and references attached documents providing additional details on requirements. The soliciting agency is the Department of the Air Force Materiel Command Lifecycle Management Center located at Hill Air Force Base.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 01 Amended Solicitation_FA821322R3034.pdf | ||
| 05 SOW Packaging.pdf | ||
| 10 CPMOriginalSpreadsheet.xlsx | XLSX spreadsheet | |
| 03 REPSHIP.pdf | ||
| 04 CADPAD Item Marking Instructions.pdf | ||
| 07 Item Description.pdf | ||
| 09 GFPForm.pdf | ||
| 02 SOW Appendix A.pdf | ||
| 01 Solicitation_FA821322R3034.pdf | ||
| 08 CDRLS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 17 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
MUNITION NOTICES
NOTES
1. MAY PLACE UP TO 20 ITEMS IN SHIPPING CONTAINER.
2. WRAP ITEM IN REF.-3, PLACE WRAPPED ITEM IN BARRIER BAG, REF.-2, REMOVE AIR AND SEAL.
3. CUSHION BAG WITH REF.-1, PLACE IN SHIPPING CONTAINER, USING ADDITIONAL CUSHIONING TO PREVENT MOVEMENT
AND ENSURE NONE OF THE BAGS CONTACT CONTAINER WALL.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .