02 Salient Characteristics.docx

Salient Characteristics & Technical Specification

CATEGORY 1. TEST/QA

ITEM 1. ADSL/VDSL Test Set: 2ea

b. Metallic testing, including voltage, resistance, balance, and noise

c. Fault locating using three terminal opens, RFL, or TDR

d. Advanced broadband troubleshooting and qualification for next generation services, including Bandwidth to 18 MHz to support ADSL2+ and VDSL

e. Identifying voice and broadband noise and interference including crosstalk and impulse noise

f. Advanced TDR capabilities for locating short bridge taps and other hard-to-detect impairments to DSL performance

g. Collecting and reporting comprehensive results

h. Integration with backoffice systems to update loop databases and maintain test results

i. Testing Functions

· DCV and ACV measurement (snapshot and continuous)

· Shorts, grounds, and loop resistance with distance conversion

· Resistive fault location (Wheatstone and K-Test)

· Load coil counter with estimated distance to fault and impedance versus frequency graph to distinguish real results from false positives

· Multimode TDR with Auto-Test: pair 1 test, compare pair 1 and 2, difference between pair 1 and 2, pair 1 monitor, pair 2 to pair 1 crosstalk, compare pair 1 to stored trace

· Broadband noise and level spectral analysis with interference masks (VDSL bandwidth)

· Broadband loss impulse noise reduction (VDSL bandwidth)

· ADSL, ADSL2+, VDSL2 and XDSL Auto-Test for pair qualification

· Optional ADSL1/2/2+ Modem (ATU-R)

· Optional VDSL Modem (ATU-R and ATU-C)

· Broadband terminated test macros (Terminator, SmartStrap, MyHelper, FED)

· Leakage stress test to 200V

· Loop device counter

· Tracing tone with four modes

· Voice frequency noise – metallic and power influence

· Voice frequency loss

· Voice frequency longitudinal balance

· Voice frequency tone generator

· Automated POTS Auto-Test

· Dial set and non-intrusive line monitor

· Voice frequency terminated and dial-up test macros (SmartStrap, MyHelper, FED, SASS, DATU, SmartPro)

b. LED Indicator charging status indicator (located on the side connector panel)

c. Communication Port RS-232 PC and printer port (DB-9)

d. operates from an external AC adapter/charger

e. operates from an internal removable NiMH rechargeable battery pack (installed)

f. Battery Operating Time (Active Mode) : 4 hours continuous (typical)

g. DSL Auto-Test Data Rate estimation

· ADSL/2 (1.104 MHz) 0 – 8 Mb/s

· ADSL2+ (2.208 MHz) 0 - 16 Mb/s

· VDSL (17.664 MHz) 0 - 55 Mb/s

b. ADSLx / VDSLx Metallic Interface : ANSI T1.413 Issue 2; ITU G.992.1a,b; G.992.2ab; G.992.3a,b,l,m; G.992.5a,b; G.993.1; G.993.2

c. Safety : CAN / CSA-C22.2 No 61010-1

d. CE : EN 61326 Class A Emissions and Immunity / EN 61010-1

ITEM 2. TELEPHONE TDR Test Set: 2ea

b. Toner – five separate tones for fast and easy differentiation between multiple wire pairs

c. SmartTone® – short the correct pair and tone changes for exact pair identification

d. Additional key testing functions include:

· Data indication – warns when data is present on the line

· Voltage indication/measurement – identifies potential line problems

· Current (mA) indication/measurement– verifies sufficient line current

· Caller-ID with Call Waiting — verifies functional service

· DTMF Digit Grabbing — isolates faulty customer premise equipment

· Detects dial tone, places and receives calls

· Polarity

b. SmartTone toner Frequencies : Steady tone: 950 Hz Alternating tones: 950 Hz and 1480 Hz

c. Power : Battery type 9 V alkaline battery

d. DropSafe™ PRO – passed 20-foot drop test onto concrete

e. RainSafe™ PRO – protection for extreme weather conditions

f. DataSafe™ PRO – prevents disruption of data transmission on the line

g. High-visibility keypad with glow-in-the-dark keys for any outside plant environment

h. Extra-large, backlit LCD screen

i. Familiar, cell phone-like menu and user interface

j. Two-way, hands-free speakerphone

k. Low battery and mute indication

l. Optional headset

b. Complies with EMC EN61326-1

c. Maximum transient voltage 1500V

ITEM 3. Industrial Logging Multimeter Test Set: 2ea

b. solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment

c. ability to log data and review it graphically on-screen

d. TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred

e. Zoom on trend provides unprecedented ability to view and analyze TrendCapture data;

f. Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event

g. Large 50,000 count, 1/4 VGA dot matrix display with white backlight

h. Logging function with expanded memory for unattended monitoring of signals over time.

i. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.

With accuracy 0.025 % 0.4 % (true-rms)

b. DC current AC current : 500.00 μA, 5000.0 μA, 50.000 mA, 400.00 mA, 5.0000 A, 10.000 A With accuracy 0.15 % 0.7 % (true-rms)

c. Temperature (excluding probe) -200.0 °C to 1350.0 °C (-328.0 °F to 2462.0 °F)

d. Resistance : 50.000 , 500.00 , 5.0000 k, 50.000 k, 500.00 k, 5.0000 M, 50.00 M, 500.0 MWith accuracy 0.05 %

e. Capacitance : 1.000 nF,10.00 nF 100.0 nF, 1.000 μF, 10.00 μF, 100.0 μF, 1000 μF, 10.00 mF, 100 mF With accuracy 1.0 %

f. Frequency : 99.999 Hz, 999.99 Hz, 9.9999 kHz, 99.999 kHz, 999.99 kHz With accuracy 005 %

g. Maximum voltage between any terminal and earth ground: 1000 V

h. Battery type: 6 AA alkaline batteries, NEDA 15A IEC LR6

i. Battery life: 100 hours minimum, 200 hours in logging mode

j. Additional Feature

Multiple on screen displays , True-rms ac bandwidth : 100 kHz , dBV/dBm DC mV resolution 1 μV, Megohm range up to 500 MΩ, Conductance 50.00 nS Continuity beeper, Battery/fuse access , Elapse time clock, Time of day clock Min-max-avg , Duty cycle Pulse width, Isolated optical interface, Auto/touch hold Reading memory, Log to PC, Interval/event logging, Logging memory up to 15,000 readings

Vibration: Random vibration per MIL-PRF-28800F Class 2 Shock: 1 meter drop per IEC/EN 61010-1 2nd Edition

ITEM 4. VRLA/VLA Battery Tester Kit : 1ea

b. capability to test Valve Regulated Lead Acid (VRLA) and Vented Lead Acid (VLA) batteries

b. Integrated lighted test interfaces allows the user to see battery post connections clearly in dark conditions.

c. Tests individual Lead-Acid or Nickel-Cadmium cells or Monoblocs (up to 16Volts) in any common configuration, approximately 10-6000Ah.

d. Field upgrade software modules Support

e. Site Builder & Battery Library Creator Package Software support

f. Support 30” probe extenders

g. 6” probe with rotating head and ½” tip for instant contact

h. Designed with an internal LED to light those hard to see battery posts in dark places

i. Incorporates a quick connect/disconnect radio frequency BNC connector for easy removal.

j. Replaceable gold-plated over Duralloy® dual probe tips

k. Additional Feature

Voltage Range : 0.8 - 20.0 Volts DC Conductance Range : 100 - 19,990 Siemens Test Data Storage : • 50 string locations of 240 test results • Stored internally • Unlimited transfer to USB drive Accuracy : +/-2% across test range, voltage & conductance Voltmeter Resolution : 5mV User Programmable Functions : • Preset values for over 250 battery types • Low voltage alarm setting • Low conductance warning • Low conductance failure • Test mode (pushbutton/auto start) Cable Options : • Dual contact clamps • Dual contact probes • Custom cables by quotation Power Requirements : • 7.2V, 2300mAh, NiMH • Internal swappable battery & charger Data Transfer: • USB Flash Drive (Type A) • USB PC Interface (Type B) • Infra-red • Half-duplex IrDA protocol for optional printer

b. Probe, clamps and cable

c. Battery Pack 2EA

CATEGORY 2. OSP ADN FOPP

ITEM 5. CORNING CCH-4U (Brand Name only): 3ea

ITEM 6. CORNING CCH-CP12-59 (Brand Name only) :36ea

ITEM 7. PIGTAIL SC /1.5M : 432ea

b. Length : 1.5 meter

c. Fiber Type : Single mode

d. Origin : Korea or USA

e. Cable Color : white

ITEM 8. CORINING SCF-ST-077 (Brand Name only): 9ea