0141-21 WINDOW GLAZING W4G10011 SOW.pdf

SPECIFICATIONS FOR REPLACEMENT SECURITY GLAZING

Section 08 88 53 - Security Glazing Requirements in Security Window Frames.

• Manufacturer Qualifications must be a firm experienced in the manufacturing of security glazing products.

• Must provide products identical, regarding Forced-Entry Resistance Performance, to those tested for compliance with requirements indicated per tests specified for SG-4 (glass-clad polycarbonate).

Testing

• Testing Agencies providing testing requirements standards are:

1. Underwriters Laboratories, Inc.

2. Wiss, Janey, Elstner Associates, Inc.

3. ASTM - American Society of Testing Materials.

• WMFL Test: Method consisting of Level Ill testing.

• ASTM F 1915 - Glazing for Detention Facilities: Tests for Forced-Entry Resistance, Grades 2.

Submittals

• Submit one sample, 12" x 12" of each product specified.

• Product data for each security glazing type which includes materials, thickness, method of test, and performance.

• Test reports must show compliance with specified requirements.

• Certification by manufacturer that products supplied comply with performance requirements specified.

• Certification by manufacturer that all materials used in glazing assembly are compatible.

• Shop drawings showing glazing products and installation procedures.

• Maintenance data covering cleaning and protection requirements.

Material

• Forced-Entry Resistance: WMFL Level Ill, 40 minutes; or ASTM F 1915 Grade 2. Laminated float glass and polycarbonate sheet, with glass on both outer surfaces (glass-clad polycarbonate);

minimum nominal thickness shall be 18 mm (3/4").

Color

• Grey Tint. May require multiple layers.

Quantity/ Dimension

• Fifty-Three (53) Pieces of 81" x 6.3125"

• Two (2) Pieces of 46.125" x 7 .125"

Delivery

• All pieces and submittals are to be shipped to:

FDC Philadelphia 700 Arch Street Philadelphia, PA 19106

SENSITIVE BUT UNCLASSIFIED