Salient_Characteristics_Industrial_Washer.pdf

33 KB Posted

Attached to
Sources Sought – Industrial Open Pocket Washing Machine for JBER, AK
Solicitation number
012345
Issued by

About this file

Written by GovTribe AI ·

The provided document is a Salient Characteristics specification for an industrial washer replacement at Joint Base Elmendorf-Richardson (JBER) in Anchorage, Alaska. The specification details precise technical requirements for a new industrial washer, including electrical specifications (220-240V, 3-phase, 50-60 Hz), mechanical capabilities (500 lb max load, 590 RPM max speed), and dimensional constraints (96-106 inches width, 90-114 inches depth). Key requirements include 30 different wash cycles, a minimum 320g extract capability, an 8-inch rear drain system, 2-inch water inlet, 1¼-1½ inch steam hook-up, and compatibility with a chemical injection system. The washer must also have a door opening of at least 40 inches and a cylinder volume of 75 cubic feet, with installation requiring a forklift capable of lifting 18,000-22,000 lbs.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

1. General requirement: To replace 475 lb Industrial Washer.

2. Salient Characteristics (same or similar):

a. Voltage – 220 to 240

b. Circuit Breaker – 100 – 150 AMPs

c. Hz – 50-60

d. Wires: 3

e. Phase: 3

f. Max load – 500 lbs.

g. Max speed – 590 RPMs

h. Shall have at least 30 cycles with different cylinder speeds for various cycles that range from at least as low as 34 RPMs to at least 590 RPMs.

i. Extract 320g minimum.

j. Door opening of at least 40 inches

k. The cylinder volume shall be at least 75 cu ft

l. Shall have 2-rear drains: diameter of 8 inches

m. Shall have a water inlet connection of 2 inches.

n. Shall have a steam hook up of 1 ¼ - 1 ½ inches.

o. Width: 96 – 106 inches

p. Depth (length): 90 – 114 inches

q. Will require forklift that lifts 18,000 – 22,000 lbs.

r. Must be able to hook up to chemical injection system.

s. Must have 2-way tilt.

3. Delivery to and Installation at JBER, Anchorage, Alaska.

4. Removal of old washer.

File details come from the government source that posted it. Updated .