01_Trapezoidal (V-shape) Fenders Drawing and Specifications.pdf

:r

T

<t.

! 0 0 0

I

I I a ,12 .. I _ _L __ _

I I • I

HOLES FOR 3/ 4"¢

BOLTS (lYP.)

_ _J_ __ <t.

2 1/2" t

END VIEW

0 0

� DRILL 1"¢ HOLES (lYPICAL) � rf O O O O O O � 0 0

FENDER SPECIFICATIONS

PROPERTY /VALUE ASTM TEST METHOD

ELONGATION = 400% (MIN.)----------------- D412

TENSILE STRENGTH = 2000 PSI (MIN.) ----------- - D412

HARDNESS (SHORE DUROMETER) = 7o± 5 ---------- D2240

TEAR RESISTANCE (DIE 8 CRESCENT) = 300 LB/IN. ----- - D624

COMPRESSION SET AT 158°F (70-C) = 25% MAX. ------ - D395-METHOD B

LOW TEMPERATURE IMPACT RESISTANCE AT -40T (-40°C) --- D746

RUBBER MATERIAL TO BE EPDM

TOLERANCES:

±4% ON EXTERIOR DIMENSIONS

± 8% ON INTERIOR DIMENSIONS

± 1 /2" ON LENGTH

± 1 /16" ON RELATIVE POSITION OF HOLES

NOTES:

1. SEE DRAWING NUMBER SLS-370-69/1 FOR

SAME FENDER WITH MOUNTING HARDWARE.

<t_ 2 1/2"

0 --& - _j - -� ....... i _ ct_ I

I' I

REV. DATE DESCRIPTION

------------------- 19 SPACES @ 6" CENTERS ------------------ 3" SAINT LAWRENCE SEAWAY

DEVELOPMENT CORPORATION

MASSENA. NCW YORK

omcc or OPERATIONS AHO MAIIIT[NANCE

------------------------- 10' ------------------------- CORPORATION FACILITIES

TRAPEZ

O

IDAL R

U

BBER FENDER

BY

SIDE VIEW

MODEL SLS-20

A

1 D' DELTA

� §>=E=J�=ITH==O=UT==M=O=

U

=NTI�-

AR

---=0-W=-

A

R

-=--E-=---�=--�=-

� - ••n:, ncn OW • liO.

11.T.S. 11/8/93 1 ., 1 SLS-:no-69/1A

'2..- 2 -2L -8� jeffrey.scharf Text Box

1-1/4" DIA. LIFTING HOLES (TYP.)

jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Text Box 30" jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Oval jeffrey.scharf Line jeffrey.scharf Text Box

1-1/4" DIA. LIFTING HOLES DRILLED VERTICALLY THROUGH FENDER (TYP.)

jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Text Box jeffrey.scharf Text Box 11/30/17 jeffrey.scharf Text Box Add Notes, Lifting Hole jeffrey.scharf Text Box jws jeffrey.scharf Oval jeffrey.scharf Line jeffrey.scharf Text Box 6" jeffrey.scharf Text Box 6" jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Text Box 30" jeffrey.scharf Text Box

2. Refer to latest revision of all drawing(s).

3. Shop drawings shall be submitted for approval prior to fabrication.

jeffrey.scharf Text Box

OR EQUAL

jeffrey.scharf Rectangle jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Line jeffrey.scharf Text Box

5" MIN.

jeffrey.scharf Rectangle jeffrey.scharf Rectangle jeffrey.scharf Rectangle jeffrey.scharf Rectangle jeffrey.scharf Rectangle jeffrey.scharf Text Box

MIN.

jeffrey.scharf Text Box

MIN.

jeffrey.scharf Text Box 11"

MIN.

jeffrey.scharf Text Box 5"

MIN.

jeffrey.scharf Text Box 20" - 22" anthony.curley Rectangle jeffrey.scharf Text Box

1/8" ON ALL DIMENSIONS

UNLESS NOTED OTHERWISE

SPECIFICATIONS

1. FENDER REQUIREMENTS.

1.1. Materials. The fender materials shall meet or exceed the requirements specified in the Synopsis.

1.2. Fabrication. The fender elements shall be fabricated to the dimensions shown on revised Drawing No. SLS-370-69/1A. Holes shall be shop-drilled. All pieces shall be handled, packaged and shipped in such a way as to prevent damage.

1.3. Quality Assurance.

1.3.1. Manufacturer Qualifications. The fender manufacturer shall demonstrate that they have been manufacturing molded rubber fenders for a minimum of five (5) years. The manufacturer must provide evidence of a minimum of three (3) installations each having been in service for a minimum of three (3) years.

1.3.2. Warranty. The fender manufacturer shall provide a written warranty against failure of the fender due to defective materials or workmanship. The warranty period shall be at least sixty (60) days from delivery.

1.4. Submittals.

The fender manufacturer shall submit the following items for approval prior to manufacture:

Certified rubber material properties.

Fender manufacturer qualifications, per paragraph 1.3.1.

Shop drawings for approval.