0084-N.docx
DOCX document 2 MB Posted
- Solicitation number
- 217678
- Issued by
- Wyoming
About this file
This Request for Proposal (RFP) 0084-N, issued by the Wyoming Department of Administration and Information's General Services Division Procurement Section on behalf of the Wyoming Department of Environmental Quality (WDEQ) Water Quality Division, seeks laboratory analytical services for analyzing influent, effluent, ambient surface water, tissue, soil, and other environmental media samples for per- and polyfluoroalkyl substances (PFAS) and various other analytes. The scope of work encompasses analysis of samples collected throughout Wyoming starting in spring 2027 and continuing through 2030, with potential extension through 2036. The contractor must provide analytical results in hard-copy laboratory reports and electronic data deliverables while meeting specified reporting limits and quality standards. Proposals are due December 22, 2026, by 2:00:00 p.m. Mountain Time through the Public Purchase online bidding system. Written questions must be submitted by November 27, 2026, at 2:00:00 p.m. Mountain Time. The tentative award date is January 2027, with work beginning in March 2027. The contract may be extended three years at a time for a total period not exceeding nine years without further solicitation.
Pricing must be submitted as per-sample unit costs for each analytical method and media type, along with separate shipping costs for coolers, bottle sets, caps, and pre-printed labels. The contractor shall be an accredited, certified, or registered laboratory using validated EPA test methods, with sufficient certified technicians to meet holding time requirements. A comprehensive analytical list in Table 1 specifies required analyses, test methods, and reporting limits across categories including PFAS, major ions, nutrients, physical properties, metals, organic compounds, volatiles, petroleum hydrocarbons, microbiological parameters, and radionuclides. The successful proposer must designate a project manager as the single point of contact, provide a quality assurance project plan and standard Level II quality control package, maintain change control processes, and submit invoices according to WDEQ policy. Evaluation criteria total 160 points, distributed across proposer background and experience (30 points), staffing and project organization (30 points), project work plan (30 points), approach to contract performance (30 points), value added (10 points), and cost analysis (30 points). No set-aside is specified in this solicitation.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF WYOMING
DEPARTMENT OF ADMINISTRATION & INFORMATION
GENERAL SERVICES DIVISION, PROCUREMENT SECTION
2323 CAREY AVENUE
CHEYENNE, WY 82002
REQUEST FOR PROPOSAL NUMBER 0084-N
Wyoming Department of Environmental Quality
Water Quality Division Laboratory Analytical Services
PROPOSAL DUE DATE AND TIME
DECEMBER 22, 2026 – 2:00:00 P.M. MOUNTAIN TIME
AGENCY REPRESENTATIVE:
JASON THOMAS
PROCUREMENT REPRESENTATIVE: BRENDA CROZIER
EMAIL ADDRESS: brenda.crozier@wyo.gov
TELEPHONE NUMBER: 307-777-6708
Table of Contents
| SECTION 1: REQUEST FOR PROPOSAL | 3 |
| SECTION 2: GENERAL PROVISIONS | 5 |
| SECTION 3: SPECIAL PROVISIONS INFORMATION | 7 |
| SECTION 4: KEY DATES | 10 |
| SECTION 5: ADMINISTRATIVE BACKGROUND | 11 |
| SECTION 6: REQUIREMENTS/SPECIFICATIONS | 12 |
| SECTION 7: PROPOSAL SUBMISSION REQUIREMENTS | 25 |
| SECTION 8: EVALUATION METHODOLOGY | 27 |
| SECTION 9: PROPOSAL PRICE SHEET AND SIGNATURE PAGE | 30 |
REMAINDER OF PAGE INTENTIONALLY LEFT BLANK.
SECTION 1: REQUEST FOR PROPOSAL
1. SUBMISSION OF PROPOSALS:
The A&I Procurement Office will receive proposals to provide laboratory services for the purpose of analyzing influent, effluent, surface water, tissue and other matrix samples collected by the Water Quality Division for the State of Wyoming, Department of Environmental Quality, Water Quality Division through the Public Purchase online bidding system. Proposals are due no later than 2:00:00 P.M. (Mountain Time) on December 22, 2026.
The technical proposal and cost proposal should be uploaded as separate documents and identified as such.
1.1. Proposals should be accompanied by the attached Proposal Price Sheet and signed by the proper official of the firm. All proposals should be uploaded on the Public Purchase online bidding system. Proposals sent by facsimile, email or paper copy may be rejected.
1.2. Proposals should be submitted through the Public Purchase online bidding system on or before the date and time specified. Proposals received after the date and time specified may be rejected.
1.3. The State of Wyoming reserves the right to withdraw this Request for Proposal, without cause, at any time before a contract has been fully signed and submitted to the A&I Procurement Office.
2. MODIFICATIONS OR WITHDRAWAL OF PROPOSALS:
2.1. A proposal may be altered through the Public Purchase online bidding system before the proposal due date and time contained in this document.
2.2. The proposer may withdraw its proposal through the Public Purchase online bidding system up to the proposal due date and time contained in this document. If a proposal is accepted and the proposer fails to furnish the service agreed upon in the proposal, that proposer may be eliminated from future consideration.
3. PREPARATION OF PROPOSALS:
3.1. A proposal may be rejected if it modifies any of the provisions, specifications or minimum requirements of the Request for Proposal.
3.2. In case of error in the extension of prices in the proposal, unit prices will govern.
4. AWARD AND CONTRACT INFORMATION:
4.1. The State of Wyoming will ensure that minority business enterprises will be afforded full opportunity to submit proposals. The State of Wyoming will not discriminate on the grounds of age, race, color, sex, creed, national origin, or disability status.
4.2. The proposer also, agrees that should their firm be awarded a contract, it will not discriminate against any person who performs work there under because of age, race, color, sex, creed, national origin or disability. In addition, the successful proposer shall comply with the Americans with Disability Act and the Wyoming Fair Employment Practices Act.
4.3. The proposer expressly warrants to the State that it has the ability and expertise to perform the contract if awarded. In doing so, it shall use the highest standards of professional workmanship.
4.4. The State of Wyoming reserves the right to reject any or all proposals, to waive any informality or technical defect in the proposals, or to award the contract in whole or in part, if deemed to be in the best interest of the State to do so. The A&I Procurement Office will award the contract to the firm, determined to have the most responsive and responsible proposal by the Department of Environmental Quality.
4.5. The successful proposer will be required to agree to and execute a formal contract with the State containing terms required by the Attorney General with reasonable adjustments acceptable to the State.
4.6. If applicable, the State will negotiate payment terms based upon a schedule to be determined by the proposer and the State. Paying invoices will be based upon the proposer successfully completing the deliverables within the stated deadlines, and upon the Agency’s written acceptance of the deliverables or services.
DATED: November 12, 2026 State of Wyoming Procurement Section Buyer: Brenda Crozier
SECTION 2: GENERAL PROVISIONS
1. INSURANCE:
1.1. The contract between the successful proposer and the State shall require the successful proposer to carry certain insurance policies. All such insurance policies, except workers’ compensation and unemployment compensation policies, shall contain a waiver of subrogation against the Agency and the State, its agents and employees.
2. LAWS TO BE OBSERVED:
2.1. The proposer shall keep fully informed of, and comply with, all applicable federal and state laws or rules, all local bylaws, regulations and all orders and decrees of bodies or tribunals having any jurisdiction or authority. The proposer shall protect and indemnify the State and its representatives against any claim or liability arising from or based on the violation of any law, bylaw, ordinance, regulation, order or decree whether by himself or its employees.
3. ASSIGNMENT:
3.1. The proposal shall not be assigned by the proposer. Third party participation is authorized only as a joint venture that shall be clearly stated in detail in the original proposal and signed by all parties participating.
3.2. The proposer shall not enter into any subcontracts for any of the work contemplated under this Request for Proposal without the State’s prior written authorization.
4. EXTENSION AND AMENDMENT:
4.1. The proposer and the State covenant and agree that this proposal or subsequent contract may, with the mutual approval of the proposer and the State, be extended three years at a time, for a total contract period not to exceed nine years.
4.2. AUDIT AND ACCESS TO RECORDS:
4.3. The State or any of its duly authorized representatives shall have access to the proposer’s books, documents, papers, electronic data and records that are directly pertinent to this Request for Proposal.
5. CONFLICT OF INTEREST:
5.1. The proposer warrants that no kickbacks, gratuities, or contingency fees have been paid in connection with this Request for Proposal and none have been promised. The proposer warrants that no one being paid pursuant to the proposal is engaged in any activity that would constitute a conflict of interest with respect to the purchases of the proposal.
6. NO FINDER’S FEE:
6.1. The proposer warrants that no finder’s fee, employment agency fee, or any such fee related to the proposal shall be paid.
7. SOVEREIGN IMMUNITY:
7.1. Pursuant to Wyoming Statute § 1-39-104(a), the State of Wyoming and the Agency expressly reserve sovereign immunity and specifically retain all immunities and defenses available to them as sovereigns. The proposer acknowledges that the State of Wyoming has sovereign immunity and only the Wyoming Legislature has the power to waive sovereign immunity. Designation of venue, choice of law, enforcement actions, and similar provisions shall not be construed as a waiver of sovereign immunity. The parties agree that any ambiguity in this Request for Proposal shall not be strictly construed, either against or for either party, except that any ambiguity as to sovereign immunity shall be construed in favor of sovereign immunity.
8. INDEMNIFICATION:
8.1. The proposer shall release, indemnify, and hold harmless the State, the Agency and its officers, agents, and employees from any and all claims, suits, liabilities, court awards, damages, costs, attorneys’ fees, and expenses arising out of the proposer’s failure to perform any of the proposer’s duties and obligations hereunder or in connection with the negligent performance of proposer’s duties and obligations, including, but not limited to, any claims, suits, liabilities, court awards, damages, costs, attorneys’ fees, and expenses arising out of proposer’s negligence or other tortious conduct.
9. APPLICABLE LAW/VENUE:
9.1. The construction, interpretation, and enforcement of this Request for Proposal shall be governed by the laws of the State of Wyoming, without regard to conflicts of law principles. The terms “hereof,” “hereunder,” “herein,” and words of similar import, are intended to refer to this Request for Proposal as a whole and not to any particular provision or part.
10. RIGHT OF OWNERSHIP AND MARKETING OF INTELLECTUAL PROPERTY AND INTELLECTUAL ASSETS SUBMITTED FOR THE RFP (IF APPLICABLE):
10.1. It is acknowledged and agreed that the only party with a right to market, trademark, patent, copyright, or any like right to any intellectual property or intellectual assets submitted in relation to the Request for Proposal shall be and is solely vested in the State. This includes all intellectual property and intellectual assets related to both the written proposal and the oral presentation and any and all documents, pitches, products, media pitches, web screens, layouts, etc. produced for the written proposal and the oral presentation, and any updates, changes, alterations, or modifications to or derivative works.
SECTION 3: SPECIAL PROVISIONS INFORMATION
PROPOSALS SHOULD BE SUBMITTED THROUGH THE PUBLIC PURCHASE ONLINE BIDDING SYSTEM BY 2:00:00 P.M. MOUNTAIN TIME ON DECEMBER 22, 2026. PROPOSALS RECEIVED AFTER THE DATE AND TIME SPECIFIED MAY BE REJECTED.
It is the responsibility of the proposer to clearly identify all information that is considered confidential in accordance with the Wyoming Public Records Act, Wyoming Statute §16-4-201 through §16-4-205. Please identify each confidential page with the word “CONFIDENTIAL” in capital, bold letters centered at the bottom of each page. Information not clearly marked may be considered public. If the proposer submits information that it believes is confidential, it should include a statement justifying its basis for that belief.
1. STATE PARTIES:
1.1. This Request for Proposal is issued by the Wyoming Department of Administration and Information, General Services Division, Procurement Section (Procurement) on behalf of the Wyoming Department of Environmental Quality.
1.2. Throughout this document and others in connection with this project, various references are made, or will be made to the “State.” Generally, whenever this reference appears, the term “State” incorporates all state agencies working on this project.
1.3. It should be understood that the Director of the Wyoming Department of Environmental Quality is empowered to be the signatory on all contracts, agreements, or modifications pertaining to this project. Any contracts, agreements, or modifications not bearing this signature or that of a designee are invalid.
2. CONTENT AND PROCUREMENT POINTS OF CONTACT:
2.1. Procurement is the primary point of contact from the date of release of the Request for Proposal until a proposer is selected and the selection is announced.
2.2. Written questions about the procurement should be submitted through the Public Purchase online bidding system until 2:00:00 P.M. Mountain Time on November 27, 2026. Any questions received after that deadline may not be accepted or considered. Each question should be submitted individually. It is the proposer’s responsibility to check the Public Purchase online bidding system for answers to questions, addenda, or bid tabulations. Telephone calls, emails or faxes may not be accepted.
2.3. Written responses will be available through the Public Purchase online bidding system. Responses will not identify the firm that submitted the question. Only the written answers issued by the Agency are the official position on an issue, and these answers shall become part of the Request for Proposal.
3. RESTRICTIONS ON COMMUNICATIONS WITH AGENCY STAFF:
3.1. Until a proposer is selected and the selection is announced, proposers shall not communicate with Agency staff except via written questions through the Public Purchase online bidding system.
3.2. If a proposer violates this restriction, the State reserves the right to reject the proposal.
4. EFFECTIVE DATES OF PROPOSAL:
4.1. All terms, conditions and costs quoted in the proposer’s response will be binding on the proposer for one-hundred eighty (180) days from the effective date of the proposal.
5. ADVERTISING AWARD CONDITIONS:
5.1. A fully executed contract should be completed with the State before the successful proposer may advertise the award of the contract or the services being performed. The proposer should agree not to refer to awards in commercial advertising in such a manner that states or implies that the firm or its services are endorsed or preferred by the State of Wyoming.
6. CONTRACT NEGOTIATIONS:
6.1. The State will notify the most qualified/successful proposer and negotiate a contract in accordance with the Wyoming Attorney General’s contract guidelines. The successful proposer will be required to enter into and sign a formal contract with the Agency.
6.2. In the event the Agency determines contract negotiations are making no forward progress, negotiations will be terminated, and at the State’s sole discretion, negotiations may be initiated with the next most qualified/successful proposer, or the RFP may be withdrawn or reissued. This process will be followed until an agreement is reached, or until the State determines that the RFP will be withdrawn or reissued. The State assumes no obligation to a selected proposer until an agreement is reached and a contract is fully executed. The State will not negotiate concurrently with more than one proposer for the same award.
7. BEGINNING WORK:
7.1. The successful proposer may not perform any work that could be billed until a contract has been executed. The State will not pay for any work by the proposer before a contract is executed.
8. COPYRIGHT INFRINGEMENT:
8.1. The proposer warrants that no materials, products, and services proposed will infringe upon or violate any patent, copyright, trade secret, or other proprietary right of any third party. In the event of a claim by any third party against the State, the State shall promptly notify the proposer, and the proposer shall defend the claim. The defense will be at the proposer’s expense.
9. COST OF PREPARING PROPOSALS:
9.1. All costs incurred for preparing the proposal and for other procurement related activities are solely the proposer’s responsibility. The State of Wyoming will not provide reimbursement of these costs.
10. RISKS AND LIABILITIES:
10.1. By submitting a proposal, a proposer assumes any and all risks and liability associated with information in the proposal and its release.
11. AMENDMENTS:
11.1. The State reserves the right to amend this Request for Proposal before the proposal submission date. Amendments shall be uploaded to the Public Purchase online bidding system. It is the proposer’s responsibility to check the Public Purchase online bidding system for amendments.
12. PROPERTY DAMAGE AND LIABILITY INSURANCE:
12.1. The proposer may be required to furnish proof of property damage liability insurance in the amount deemed necessary by the Agency for this project, if applicable.
12.2. Questions regarding required insurance coverage and limits for this project should be submitted in writing, in accordance with instructions outlined in the special provisions.
13. MISREPRESENTATION OF INFORMATION:
13.1. Misrepresentation of a proposer’s status, experience, or capability in the proposal may result in disqualification of that proposer from the selection process. Discovery of litigation or investigations in a similar area of endeavor may, at the discretion of the Agency and after consultation with Procurement, preclude the proposer from the selection process.
14. DISPOSITION OF PROPOSALS:
14.1. All material submitted becomes property of the State of Wyoming, which is under no obligation to return any of the material submitted.
15. LEGAL CONSIDERATIONS:
15.1. This Request for Proposal is issued under Wyoming Statute §9-2-3204.
16. PROPOSER RELATIONS WITH STATE:
16.1. The proposer and its staff will have an ongoing relationship with the State that is based on trust, confidentiality, objectivity and integrity. The proposer will operate at all times in the State’s best interests and in a straightforward, trustworthy and professional manner. The proposer shall:
16.1.1. Work cooperatively with the State’s staff and business partners whenever required.
16.1.2. Work cooperatively with the staff of other proposers whenever required.
REMAINDER OF PAGE INTENTIONALLY LEFT BLANK.
SECTION 4: KEY DATES
| Event Description |
| Date |
| Time (Mountain Time) |
| RFP Release Date |
| 11/12/2026 |
| N/A |
| Closing Date for Questions |
| 11/27/2026 |
| 2:00 P.M. |
| Response to Questions Returned |
| 12/3/2026 |
| 2:00 P.M. |
| RFP Submission Due Date |
| 12/22/2026 |
| 2:00:00 P.M. |
| Tentative Award Date |
| January 2027 |
| N/A |
| Tentative Work Begins Date |
| March 2027 |
| N/A |
SECTION 5: ADMINISTRATIVE BACKGROUND
1. INTRODUCTION AND BACKGROUND:
1.1. The Wyoming Department of Environmental Quality (WDEQ), Water Quality Division (WQD) is looking to conduct a baseline investigation to evaluate per- and polyfluoroalkyl substances (PFAS) in various environmental media and would like to identify a contract laboratory to analyze influent, effluent, ambient surface water, tissue, and other matrix samples for PFAS and other parameters to support agency actions.
2. PURPOSE AND INTENT:
2.1. The purpose of this Request for Proposal (RFP) is to solicit competitive proposals from proposers who can offer laboratory services for the analysis of influent, effluent, ambient surface water, tissue, soil, and other environmental media for PFAS and other analytes as requested by the DEQ to meet the Agency’s needs and expectations, as described within this RFP.
3. STAKEHOLDERS:
3.1. The analytical results provided by the contract lab will inform the DEQ Water Quality Division about the levels of PFAS and other analytes in influent, effluent, ambient surface water, tissue and other media to determine if PFAS and other analytes are a concern in Wyoming surface waters.
REMAINDER OF PAGE INTENTIONALLY LEFT BLANK.
SECTION 6: REQUIREMENTS/SPECIFICATIONS
1. SCOPE OF PROJECT:
This project will consist of analyzing influent, effluent, ambient surface water, fish tissue and/or other matrix samples listed in the Scope of Work below to provide information about the concentration of PFAS in Wyoming wastewater, surface water, fish tissue and/or other media. The results must be provided in hard-copy laboratory reports and electronic data deliverables while meeting the associated reporting limits and quality standards. The agency will collect the specified samples from various wastewater treatment facilities, water bodies, fish tissue, and other media throughout the State starting in the spring of 2027 and continuing through 2030, with the possibility to continue through 2036.
2. GENERAL REQUIREMENTS:
2.1. Scope of Activity – Contractor: The Scope of Work includes the time and materials to analyze surface water, influent, effluent, fish tissue, and/or other matrix samples for the pollutant categories, analytes, methods, and reporting limits listed in Table 1 below. Contractor will meet the appropriate quality standards, and provide accurate data in laboratory reports and electronic data deliverables. Contractor also may be asked to analyze samples (e.g., aqueous, soils, tissue, etc.) other than those specified in Table 1 at a mutually agreed-upon price.
2.2. Table 1 Analytical List
| Analysis Group |
| Analysis |
| Test Method |
| Reporting Limit |
| Per- and Polyfluoroalkyl Substances (PFAS) |
| PFAS: Water, Tissue, soil |
| E1633A |
| 1.6 ng/L * |
| PFAS |
| PFAS Compounds in Aqueous Matrices |
| E1621 |
| 1.5 µg/L |
| PFAS |
| PFAS Compounds in Drinking Water |
| E533 |
| 1.9 ng/L* |
| PFAS |
| PFAS Compounds in Drinking Water |
| E537.1 |
| 1.9 ng/L* |
| Major Ions |
| Alkalinity |
| A2320 B |
| 5 mg/L |
| Major Ions |
| Chloride: by Ion Chromatography |
| E300.0 |
| 1 mg/L |
| Major Ions |
| Sulfate: by Ion Chromatography |
| E300.0 |
| 1 mg/L |
| Major Ions |
| Fluoride: by Ion Chromatography |
| A4500-F C |
| 0.1 mg/L |
| Major Ions |
| Solids, Total Dissolved (TDS) |
| A2540 C |
| 10 mg/L |
| Nutrients |
| Phosphorus Orthophosphate as P |
| E365.1 |
| 0.01 mg/L |
| Nutrients |
| Phosphorus |
| E365.1 |
| 0.005 mg/L |
| Nutrients |
| Nitrogen, Total Kjeldahl |
| E351.2 |
| 0.5 mg/L |
| Nutrients |
| Nitrogen, Ammonia |
| E350.1 |
| 0.05 mg/L |
| Nutrients |
| Nitrogen, Nitrate + Nitrite |
| E353.2 |
| 0.01 mg/L |
| Nutrients |
| Nitrogen, Nitrite |
| A4500-NO2 B |
| 0.01 mg/L |
| Nutrients |
| Nitrogen, Total |
| Calculation |
| 0.5 mg/L |
| Physical Properties |
| Foaming Agent, Low Level |
| A5540 C |
| 0.1 mg/L |
| Physical Properties |
| Biochemical Oxygen Demand, 5 Day |
| A5210 B |
| 2 mg/L |
| Physical Properties |
| Solids, Total Suspended |
| A2540 D |
| 1 mg/L |
| Physical Properties |
| Chemical Oxygen Demand (COD) |
| E410.4 |
| 5 mg/L |
| Physical Properties |
| Color |
| A2120 B |
| 0.1 – 5 c.u. |
| Major Ions: Metals by ICP/ICPMS, Total |
| Calcium |
| E200.7_8 |
| 1 mg/L |
| Major Ions: Metals by ICP/ICPMS, Total |
| Magnesium |
| E200.7_8 |
| 1 mg/L |
| Major Ions: Metals by ICP/ICPMS, Total |
| Potassium |
| E200.7_8 |
| 1 mg/L |
| Major Ions: Metals by ICP/ICPMS, Total |
| Silica |
| E200.7_8 |
| 0.2 mg/L |
| Major Ions: Metals by ICP/ICPMS, Total |
| Sodium |
| E200.7_8 |
| 1 mg/L |
| Metals, Total |
| Chromium, Total Hexavalent |
| A3500-Cr B |
| 1 mg/L |
| Metals, Total |
| Mercury, Total |
| E245.1 |
| 0.0001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Aluminum |
| E200.7_8 |
| 0.03 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Antimony |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Arsenic |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Barium |
| E200.7_8 |
| 0.05 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Beryllium |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Boron |
| E200.7_8 |
| 0.05 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Cadmium |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Chromium |
| E200.7_8 |
| 0.005 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Copper |
| E200.7_8 |
| 0.005 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Iron |
| E200.7_8 |
| 0.02 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Lead |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Manganese |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Molybdenum |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Nickel |
| E200.7_8 |
| 0.005 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Selenium |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Silver |
| E200.7_8 |
| 0.001 mg/L |
| Metals, Total: Metals by ICP/ICPMS, Total |
| Zinc |
| E200.7_8 |
| 0.01 mg/L |
| Non-Metals |
| Carbon, Dissolved Organic |
| A5310 C |
| 0.5 mg/L |
| Non-Metals |
| Phenolics, Total Recoverable (Distilled) |
| E420.4 |
| 0.01 mg/L |
| Non-Metals |
| Carbon, Total Organic |
| A5310C |
| 0.5 mg/L |
| Non-Metals |
| Chlorophyll A |
| A10200H |
| 1 mg/cu. m |
| Organic Characteristics |
| Oil and Grease |
| E1664A |
| 5 mg/L |
| Inorganics |
| Cyanide, Weak Acid Dissociable |
| Kelada-01 |
| 0.005 mg/L |
| Inorganics |
| Sulfide, Methylene Blue Colorimetric |
| A4500-S D |
| 0.04 mg/L |
| Petroleum Hydrocarbons-Semi-Volatile |
| Diesel Range Organics |
| SW8015C |
| 0.3 mg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| 1-Methylnaphthalene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| 2-Methylnaphthalene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Acenaphthylene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Acenaphthylene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Anthracene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Benzo(a)anthracene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Benzo(a)pyrene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Benzo(b)fluoranthene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Benzo(g,h,i)Perylene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Benzo(k)fluoranthene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Chrysene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Dibenzo(a,h)anthracene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Fluoranthene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Fluorene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Ideno (1,2,3-dc) pyrene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Naphthalene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Penanthrene |
| SW8270C |
| 10 µg/L |
| Polynuclear Aromatic Hydrocarbons: Semi-Volatile Organic Compounds, PAHs |
| Pyrene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 1,2,4-Trichlorobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 1,2-Dichlorobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 1,3-Dichlorobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 1,4-Dichlorobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 1-Methylnaphthalene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,4,5-Trichlorophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,4,6-Trichlorophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,4-Dichlorophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,4-Dimethylphenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,4-Dinitrophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,4-Dinitrotoluene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2,6-Dinitrotoluene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2-Chloronaphthalene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2-Chlorophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2-Methylnaphthalene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 2-Nitrophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 3,3’-Dichlorobenzidine |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 4,6-Dinitro-2-methylphenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 4-Bromophenyl phenyl ether |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 4-Chloro-3-methylphenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 4-Chlorophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 4-Chlorophenyl phenyl ether |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| 4-Nitrophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Acenaphthene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Acenaphthylene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Anthracene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Azobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Benzidine |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Benzo(a)anthracene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Benzo(a)Pyrene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Benzo(b)fluoranthene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Benzo(g,h,i)perylene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Benzo(k)fluoranthene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| bis(-2-chloroethoxy) Methane |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| bis(-2-chloroethyl) Ether |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| bis(2-choroisopropyl) Ether |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| bis(2-ethylhexyl) Phthalate |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Butylbenzylphthalate |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Chrysene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Dibenzo(a,h)anthracene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Diethyl phthalate |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Dimethyl phthalate |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Di-n-butyl phthalate |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Di-n-octyl phthalate |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Fluoranthene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Fluorene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Hexachlorobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Hexachlorobutadiene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Hexachlorocyclopentadiene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Hexachloroethane |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Indeno(1,2,3-cd) pyrene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Isophorone |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| m+p-Cresols |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Naphthalene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Nitrobenzene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| n-Nitrosodimethylamine |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| n-Nitroso-di-n-propylamine |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| n-Nitrosodiphenylamine |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| o-Cresol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Pentachlorophenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Phenantrene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Phenol |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Pyrene |
| SW8270C |
| 10 µg/L |
| Semi-Volatile Organic Compounds |
| Pyridine |
| SW8270C |
| 10 µg/L |
| Volatile Organic Compounds |
| 1.1.1.2-Tetrachloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,1,1-Trichloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,1,2,2-Tetrchloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,1,2-Trichloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,1-Dichloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,1-Dichloroethene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,1-Dichloropropene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,2,3-Trichloropropane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,2-Dibromoethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,2-Dichlorobenzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,2-Dichloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,2-Dichloropropane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,3-Dichlorobenzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,3-Dichloropropane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 1,4-Dichlorobenzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 2,2-Dichloropropane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 2-Chlorotoluene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| 4-Chlorotoluene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Benzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Bromobenzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Bromochloromethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Bromodichloromethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Bromoform |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Bromomethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Carbon tetrachloride |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Chlorobenzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Chlorodibromomethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Chloroethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Chloroform |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Chloromethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| cis-1,2-Dichloroethene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Cis-1,3-Dichloropropene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Dibromomethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Dichlorodifluoromethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Ethylbenzene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| M+p-Xylenes |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Methyl ethyl ketone |
| SW8260B |
| 20 µg/L |
| Volatile Organic Compounds |
| Methyl tert-butyl ether (MTBE) |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Methylene chloride |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| o-Xylene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Styrene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Tetrachloroethene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Toluene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Trans-1,2-Dichloroethene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Trans-1,3-Dichloropropene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Trichloroethene |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Trichlorofluoromethane |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Vinyl chloride |
| SW8260B |
| 1 µg/L |
| Volatile Organic Compounds |
| Xylenes, Total |
| SW8260B |
| 0 µg/L |
| Petroleum Hydrocarbons-Volatile |
| Gasoline Range Organics |
| SW8015C |
| 0.02 mg/L |
| Microbiological |
| Bacteria, E. coli |
| Colilert® Method |
| 1 MPN/100 ml |
| Microbiological |
| Bacteria, Fecal Coliform |
| Colilert-18 |
| 1 MPN/100 ml |
| Microbiological |
| Bacteria, SDWA |
| A9223 B |
| 1 per 100 ml |
| Radionuclides, Total |
| Radium 226, Total |
| E903.0 |
| -1000 – 0 pCi/L |
| Radionuclides, Total |
| Gross Alpha minus Radon and Uranium, Total |
| E900.1 |
| -1000 – 0 pCi/L |
| Radionuclides, Total |
| Radium 228, Total |
| RA-05 |
| -1000 – 0 pCi./L |
| Radionuclides, Total |
| Radium 226 + Radium 228 |
| A&500-RA |
| -1000 – 0 pCi/L |
| Metals – Speciated – Total |
| Selenium-IV, Total |
| A3114 |
| 0.001 mg/L |
| Metals – Speciated |
| Arsenic Speciation, Total |
| E1632 AM |
| 5 µg/L |
| Speciated, Dissolved |
| Arsenic Speciation, Dissolved |
| E1632AM |
| 5 µg/L |
*Extremely low reporting limit. Reporting limit needs to be as low as possible.
In addition to using the methods that are sensitive enough to meet the required reporting limits, the following inclusions should be considered while preparing a response to the RFP:
1. Shipping costs for coolers, empty bottle sets, caps and pre-printed non-water resistant/proof sample bottle labels from the laboratory to WDEQ District Offices.
2. Coolers, empty bottle sets, caps and pre-printed non-water resistant/proof sample bottle labels.
3. Analysis performed by accredited/certified/registered laboratories, including subcontract laboratories (provided with the proposal), using validated analytical methods.
4. Standard (Level II) quality control (QC) package.
5. Matrix showing holding times, bottles used, and preservatives.
6. Deliverables should include the following items:
a. Electronic data deliverables (EDD) in WDEQ format for each sample set and QC samples.
b. Electronic copies of laboratory reports with analytical data, including Laboratory QC summary and chain of custody (COC) forms.
c. Invoice for materials and services according to WDEQ policy.
Schedule and Cost Based on funding, this contract will be extended three years at a time, for a total contract period not to exceed nine years without further solicitation. The DEQ/WQD anticipates collecting influent and effluent samples from targeted sanitary wastewater treatment facilities in Wyoming, as well as ambient surface water, tissue, and other matrices of interest.
Proposed costs should be submitted (preferably in one table) for the following items:
1. Each analysis type (Unit cost per analyte);
2. Shipping costs for coolers, bottles, caps, and pre-printed bottle labels that are not water resistant/proof.
2.3. Scope of Activity – Agency: Water Quality Division staff will sample influent, effluent, ambient surface water, tissue, soil and other media for PFAS and other analytes, and ship those samples to an approved contract laboratory for analysis. Sampling will begin in the Spring of 2027, and continue through 2036.
2.4. Communication requirements: Data will be reported using electronic data deliverables (EDD) in WDEQ format for each sample set and QC samples. The proposer will provide a detailed laboratory report to the WDEQ Project Manager upon completion of analysis of the submitted samples and validation of the results. The report will include all analytical results and a standard (Level II) QAQC package including the date and time of sample collection, the name of the individual who collected the sample, the date and time of sample shipment to the proposer, the date and time of parameter analysis, the name of the individual who performed the sample analysis, the EPA test method for each analysis, and the analytical result along with the appropriate units. The Invoices for materials and services according to WDEQ policy will also be provided.
2.5. Staffing/Qualifications requirements: The laboratory will provide proof that it is an accredited/certified/registered laboratory for the analysis of water samples and other selected media as requested by the WDEQ, including subcontract laboratories (provided with the proposal), using approved EPA test methods (E1633A and E1621 for PFAS). The lab will provide a standard (Level II) quality control (QC) package, and a quality assurance project plan (QAPP). The producer will conduct all necessary internal laboratory QAQC analysis to ensure analytical results are accurate and reliable, and provide the associated QAQC information with the respective analytical report and chain of custody form (COC). The lab should have sufficient certified laboratory technicians to ensure samples are analyzed within holding times.
2.6. Equipment needs: The contract lab will have all of the necessary equipment, materials, reagents, etc. to conduct the requested analysis and provide quality results.
3. RESOURCE RESPONSIBILITIES:
3.1. Project Manager: The proposer should designate a project manager to represent and oversee the project. This individual will serve as the focal and contact point for all proposer business matters relating to the project. An individual resume, a list of their qualifications, years of experience, current work assignments and office location should be included. Confirm that the project manager will:
3.1.1. Be the single point of contact for the duration of the engagement.
3.1.2. Be responsible for timely completion of all phases of the project.
3.1.3. Be responsible for meeting all contractual requirements for the duration of the project.
3.1.4. Attend status, quality review and acceptance meetings as required and present status and progress reports on the project.
3.1.5. Remain assigned to the project through completion of the project as determined by the Agency.
3.1.6. Identify project responsibilities and job functions.
3.2. Subcontractors will report to and be responsible to the proposer
3.2.1. The proposer shall provide a description of work to be subcontracted to third parties.
3.2.2. Certify any supporting contractor who may assist the primary contractor and meet the minimum proposer qualifications.
3.2.3. A description of the nature and duration of the previous relationship of all subcontractors and/or third parties with the prime contractor.
3.2.4. Explanation of any existing contractual relationship between the prime and subcontractors, or among subcontractors.
3.3. Resource Management and Staffing Plan: the proposal should contain the proposer’s staffing plan in response to the requirements set forth in the RFP. At a minimum, the staffing plan should address the following:
3.3.1. Staffing Levels (estimated by staff disciplines by month for the duration of the project).
3.3.2. Break out of staff disciplines (including title and job responsibility)
3.3.3. Detail differentiated by staff (proposer, subcontractor, etc.)
3.3.4. Personnel whose names and resumes are submitted in the proposal shall not be removed from this project without prior approval of the Agency. Substitute or additional personnel shall not be used for the project until a resume is received and approved by the Agency.
3.3.5. The agency shall have the right to request the removal of any proposer staff member from all work on this project, and the proposer will comply with any such request immediately.
3.3.5.1. The replacement for any staff member who is removed from or leaves the project for any reason should match or exceed the replaced staff member in terms of skill level and experience. Such replacements are subject to the Agency approval at the time of assignment and again 90 days later.
4. CHANGE CONTROL MANAGEMENT:
4.1. The proposer shall maintain a control change process with all changes approved through the Agency. The control change process should include the reason for the change, complete description of the work to be performed, estimate of time and cost to complete the task, completion date for the change and an impact analysis indicating ramifications or impact to the project.
4.2. If unforeseen circumstances arise where a dispute resolution may be needed, the proposer will submit (in writing) a description of the problem and proposer resolution to the project manager and Agency primary point of contact. If changes requests are needed, the proposer agrees to continue at the hourly rate specified in the proposal.
4.3. In the event it is determined that a change to the Statement of Work is required, a contract amendment shall be made to the contract in accordance with the Contract.
SECTION 7: PROPOSAL SUBMISSION REQUIREMENTS
1. TECHNICAL PROPOSAL, FORMAT AND CONTENTS:
1.1. Proposals should be submitted in two major sections: the Technical Proposal and the Cost Proposal. Omission of this section or any item within this section may result in the proposal being eliminated. The proposer should, at a minimum, address the following points:
1.1.1. Table of Contents: The table of contents should include all items listed in this section.
1.1.2. Executive Summary: The executive summary will condense and highlight the contents of the technical proposal in such a way as to provide the State with a broad understanding of the proposer’s qualifications and approach to meeting the requirements of the RFP.
1.1.3. Proposer’s Background and Experience: The proposer should include a company summary including the company history, location, office location(s), company size, financial statements (if applicable), and the statement of technical areas of expertise. The proposer should be able to substantiate to the satisfaction of the Agency that the proposer has sufficient resources to complete the project successfully within the time requirements.
1.1.4. Resumes: The proposer should include brief resumes for personnel that will be working on the project, if awarded the contract. The resumes should clearly identify expertise in the functional areas listed in Section 6. Specialized training courses will not be acceptable for demonstration of expertise in the required areas. Proven work experience combined with related education will be the means of substantiating expertise.
1.1.4.1. Resume Format: Each project reference in a resume should include both the customer's name and the time period the person worked on the project, as well as a brief description of the scope of work for that project. In addition, resumes should explain the role and responsibility of each person participating in the project. The State expects that personnel associated with these resumes will be the personnel working on the project, should the proposer be awarded the contract.
1.1.5. References: Corporate references are required from three (3) prior clients. In addition, two (2) references are required for each of the staff members being proposed for the project. Whenever possible, an alternative point of contact for each reference should be listed with a phone number and email address. Each reference should depict relevant experience that can be brought to bear during the term of this RFP. In order to ensure current expertise, all work for client references provided should have been completed no more than three years prior to the release date of this RFP.
1.1.5.1. References may be verified during the proposal evaluation by telephone calls made by members of the Evaluation Committee or through e-mail or the United States Postal Service.
1.1.5.2. If contact with the referenced contact person or an alternative that has knowledge of the proposer is not made after reasonable attempts during the designated evaluation period, the reference will be classified as unsatisfactory. All attempts to contact a referenced client will be documented, including the date and time of the attempt.
1.1.5.3. The Agency reserves the right to contact other State of Wyoming agencies regarding engagements they may have had with the proposer’s company in the past, in addition to the references provided in the proposal.
1.1.6. Single Point of Contact: The proposer should identify a single point of contact for all contract management activities. The proposer’s Project Manager’s name and resume should be submitted with the proposal. The successful proposer should not change the Project Manager without written Agency approval.
1.1.7. Proposer’s Project Work Plan: The proposer should submit a work plan that meets the needs of the RFP and indicates a thorough understanding of the scope of work as outlined in Section 6. The proposer should identify realistic person hours of effort and responsibilities for the deliverables and each work activity.
1.1.8. Project Management Plan: The proposal should contain a comprehensive and practical description of the proposer’s plans for project management and control, including staff organization structure, progress reporting, major decision making, sign-off procedures and internal control procedures. The proposer should also indicate flexibility in meeting changes in program requirements and coping with problems.
1.1.9. Project Delays: Proposer should also describe how project delays will be addressed should they occur. This should include assurances that sufficient resources and knowledgeable, experienced staff are available to meet any project schedule.
1.1.10. Contract Exceptions: Proposers should state agreement with all General Provisions and should furnish any exceptions to these provisions.
1.1.11. Staffing and Project Organization: An organization chart should be included with all proposed personnel, including the supervisor level, functional responsibilities, key personnel, and other staff members who will be involved in the project.
1.1.12. Proposer Checklist: The proposer should submit a checklist in which the proposer should evaluate their existing offering compared with the RFP mandatory/optional requirements.
2. COST PROPOSAL FORMAT AND CONTENT:
2.1. Cost Proposal Price Sheets: Each applicable proposer should upload the Technical Proposal and the Cost Proposal Sheets as separate documents, and identify them as such, using the Public Purchase online bidding system. The prices to be entered on this page are the price per sample for the various analytical methods/media requested, along with the cost to ship coolers, sample bottles, caps, and pre-printed labels that are not water resistant. The proposer should ensure all signatures and identifying numbers are properly affixed to this page in order for the Cost Proposal to be accepted.
SECTION 8: EVALUATION METHODOLOGY
1. OVERVIEW:
1.1. The Agency will conduct a comprehensive, fair, objective and impartial evaluation of proposals received in response to this Request for Proposal. Proposals will be evaluated independently by the evaluation committee members. The evaluation committee shall be made up of members representing the project subject expertise. The evaluation committee will review and score all proposals independently and consolidate the scores in order to determine the award.
2. COMPLIANCE WITH MANDATORY REQUIREMENTS:
2.1. To be considered responsive, a submitted proposal should meet the minimum requirements defined in this RFP. The minimum requirements are intended to ensure that evaluation of the Technical Proposal can proceed and that the Contractor agrees to perform all responsibilities within the RFP.
3. TECHNICAL SCORING AND RANKING:
3.1. PROPOSER BACKGROUND AND EXPERIENCE: 30 Points. Proposer should present materials describing its organization capability to successfully perform the responsibilities of this contract.
3.1.1. Details of previous contractual experience should include the length of time covered by the contract, the types of tasks performed and the results thereof, and a reference that includes a name, current title and telephone number. Emphasis should be placed on experience/implementing projects similar to the scope of work described in this RFP.
3.1.2. Provide three (3) project references for current or recently completed (within the last three (3) years) contracts similar in nature to the services required by the Agency for this contract will be included in this section. Contract references should include the name, position, title, and current phone number of the client.
3.1.3. This section will also address overall organizational size, computer resources, financial stability and current contractual obligations. The proposer should include a current financial statement and proof of federal or professional certifications or other credentials.
3.2. STAFFING AND PROJECT ORGANIZATION: 30 Points. The proposer should provide an organization chart with all proposed personnel, including the supervisor level, functional responsibilities, key personnel, and other staff members who will be involved in this project.
3.2.1. The proposer should emphasize their proposed resources are dedicated to the achievement and ongoing maintenance and support of corporate level certifications and corporate credentials related to the scope of work outlined in this RFP.
3.2.2. The proposer should include brief resumes for personnel that will be working on the project. The resumes should clearly identify expertise in the functional areas listed in the scope of work. Specialized training courses will not be acceptable for demonstration of expertise in the required areas. Proven work experience combined with related education will be means of substantiating expertise.
3.2.3. Two (2) references for each of the staff members being proposed for the project should be included in the proposal. Each reference should depict relevant experience that can be brought to bear during the term of this RFP. In order to ensure current expertise, all work for client references provided should have been completed no more than three years prior to the release date of this RFP.
3.2.4. The proposer should identify a single point of contact for all contract management activities. The proposer’s Project Manager’s name and resume should be submitted with the proposal. The successful proposer should not change the Project Manager without written Agency approval.
3.3. PROPOSER’S PROJECT WORK PLAN: 30 Points. The proposer should submit a work plan that meets the needs of the RFP and indicates a thorough understanding of the scope of work. The work plan should:
3.3.1. Identify all required work activities, milestones and deliverable dates, personnel hours of effort and responsibilities for the deliverables and each work activity.
3.4. APPROACH TO CONTRACT PERFORMANCE: 30 Points. The proposer should describe its approach to meeting the mandatory requirements and specifications as described in the RFP.
3.4.1. Approach in addressing the goals and objectives specified in Section 6.
3.4.2. Approach to a comprehensive and practical plan for project management…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .