00012552 Specifications.docx
DOCX document 15 KB Posted
- Attached to
- Mill Creek Ornamental Fence and Gates
- Solicitation number
- S-73000-00012552
- Issued by
- Marion County, Oregon
About this file
This specification document from the Oregon Department of Transportation (ODOT) outlines requirements for a fencing project at the Mill Creek facility located at 555 13th Street in Salem, Oregon. The project calls for the installation of approximately 642 feet of 8-foot tall, 3-rail spear top ornamental steel fence, including two 24-foot wide cantilevered single slide gates with bottom track and two 4-foot wide egress gates. The scope includes installation of two 24VDC High-Traffic Commercial Slide Gate Operators (Liftmaster or equivalent) with battery backup, safety loops, exit loops, photo eyes, and remotes. Additional requirements include installation of a double reader gooseneck pedestal with bollards and LED lighting above egress gates.
The contractor must be licensed and bonded, and is responsible for utility locates, asphalt cutting and patching, power installation, conduit installation for communications and security access, shrub clearance, and obtaining electrical permits. The contractor must install 120-volt 20-amp circuits for gate motors and is liable for any damage to existing utility lines. ODOT will handle security access wiring and programming separately.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 00012552 Plans.pdf | ||
| 00012552 Invitation to Bid.docx | DOCX document | |
| 00012552 Prelim Bid Results.xlsx | XLSX spreadsheet | |
| RFP 2024-124- Pre-Proposal Meeting.pdf | ||
| Drawing-Montage Commercial Classic.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATIONS
Project: Mill Creek Ornamental Fence and Gates
The Oregon Department of Transportation (“ODOT”) is seeking a licensed and bonded fencing contractor to perform work at the Mill Creek facility. The project is located at 555 13th Street, Salem, Or.
ODOT’s Mill Creek facility needs approximately 642’ of 8’ tall 3 rail spear top ornamental steel fence with (2) 24’ wide cantilevered single slide gates (bottom track) and (2) 4’ wide egress gates.
Install (2) 24VDC High-Traffic Commercial Slide Gate Operators, with battery backup, Liftmaster brand or approved equivalent, with (4) safety loops, (2) exit loops, (2) photo eyes, (6) remotes. Install (1) double reader gooseneck pedestal with (6) bollards. Install (1) LED light above each egress gate, (1) pole to be 10’ above gate for light.
Contractor is responsible for utility locates, cutting of asphalt and patching, running power to gate openers, adding 1” conduit for communication and the electrical permit. Contractor is also responsible for running conduit for egress gates for security access. ODOT is responsible for security access wiring and programming.
Contractor is responsible for clearing away shrubbery for installation of fence posts and is responsible for any damage done to existing water, gas or electrical lines. Contractor to install 120-volt 20-amp circuit for power to both gate motors.
File details come from the government source that posted it. Updated .