UNSPSC 71112027: Stuck point tool services

Services to remove drill stem, tubing, or casing which is stuck.

UNSPSC 71112027 Stuck point tool services is a Commodity code with minimal and materially misaligned recent activity in state and local procurement. The source contains four recent opportunities posted between January and April 2026, but only one—the Dalton-Whitfield Solid Waste Authority's landfill gas collection and control system expansion—bears any plausible connection to the code's nominal scope, and that connection is tenuous. The three other opportunities (Rob Sullivan Park irrigation improvements for the City of DeBary, Florida; a digester gas utilization DBFOOM project for the Eastern Municipal Water District in Riverside County, California; and executive search services for the City of College Park, Georgia) are plainly unrelated to stuck point tooling. The single tangentially relevant solicitation involves construction and installation of landfill gas extraction infrastructure—wells, piping, condensate sumps, and controls—which does not align with the definition of stuck point tool services.

The Dalton-Whitfield Solid Waste Authority issued an Invitation to Bid (ITB) on April 17, 2026, with responses due by 3:00 p.m. EST on May 21, 2026, for landfill gas collection system construction and installation at its Old Dixie Highway Municipal Solid Waste Landfill in Dalton, Georgia. The work encompasses surveying, installation of gas extraction wells with HDPE casing, approximately 4,100 linear feet of 6-inch perforated horizontal collectors, various lateral piping runs totaling over 14,000 linear feet, liquefied fossil gas wellheads, condensate sumps with pneumatic pumps, and seeding and erosion control matting across 46,100 square yards. Qualifying contractors must hold Georgia general contractor licensing, demonstrate a minimum of five years' experience in landfill gas collection system construction, and have successfully completed at least five similar or larger projects within the past five years, with at least 50 percent of labor performed on-site. The contract carries a 120-day Substantial Completion deadline and 150-day final completion deadline from Notice to Proceed, with liquidated damages of $2,000 per day for the first 90 days after Substantial Completion, escalating to $5,000 per day thereafter. The source reveals no recent activity under this code outside Georgia and no pattern of state or local solicitation activity that would support a pursue recommendation.