UNSPSC 40174609: CPVC plastic pipe tee

Pipe tee made of CPVC plastic

UNSPSC 40174609 CPVC plastic pipe tee is a Commodity code covering plastic pressure and gravity pipe fittings used in municipal water and sewer infrastructure replacement and rehabilitation work. State and local governments procure these fittings as components within larger infrastructure projects, particularly during mainline replacement, pipe bursting rehabilitation, service connection work, and system extensions. Recent opportunities show the code is active in county sanitation districts, water authorities, and municipal public works departments undertaking aging-infrastructure renewal across multiple states. Solicitations typically embed CPVC and PVC pipe tee specifications within comprehensive ITB or IFB notices for sewer and water main projects, rather than as standalone material procurements.

Recent activity centers on Florida and California. Pinellas County, Florida issued IFB 260652ITBC in October 2026 for the Ridgewood Estates Sewer Improvements and 82nd Avenue & 113th Street Water Main Improvements projects, combining approximately 500 linear feet of 12-inch PVC sanitary sewer pipe, 6,800 linear feet of 6-inch water main replacement, and related service connection work across overlapping work areas with a 10% SBE participation goal and final bid due November 5, 2026. Santa Clara County, California issued ITB ITBRDAFY270088 in August 2026 for County Sanitation District No. 2-3 Structural Defect Repair Project Phase 2, specifying removal and replacement of existing VCP with PVC SDR26 pipe at multiple diameters (326 linear feet of 6-inch, 114 linear feet of 8-inch, 43 linear feet of 10-inch), pipe-burst replacements, and twenty-seven 4"x6" wyes, two 4"x8" wyes, and two 4"x10" wyes for service connection fittings, with proposals due September 17, 2026. Santa Clara County also issued ITB ITBRDAFY260694 for the Central Expressway Pavement Rehabilitation Project in May 2026, though that opportunity does not specify PVC fitting quantities. Bidders must verify specific fitting types, sizes, and quantities in each project's technical specifications, as the master ITB or IFB notice may not itemize all component materials.