UNSPSC 40172800: Pipe elbows

UNSPSC 40172800 Pipe elbows is a Class code that does not align with the recent state and local contract opportunities posted under it. The three most recent opportunities—coordinated sewer and water main replacement projects from Pinellas County, Florida (ITB 260652ITBC, due November 5, 2026) and a sanitation district structural-defect repair program from Santa Clara County (ITB ITBRDAFY270088, due September 17, 2026) and a county pavement rehabilitation project (ITB ITBRDAFY260694, due May 21, 2026)—involve large-diameter replacement pipe (6-inch to 12-inch PVC and HDPE mainline and service laterals), wyes, and associated gravity sewer and water infrastructure, not elbows as a distinct product line. The Pinellas County opportunity specifies approximately 500 linear feet of 12-inch PVC sanitary sewer pipe and 6,800 linear feet of 6-inch water main replacement; the Santa Clara sanitation district project calls for removal and replacement of vitrified clay and cast iron pipe with PVC and HDPE in 6-inch, 8-inch, and 10-inch diameters, along with twenty-seven 4"×6" wyes, two 4"×8" wyes, and two 4"×10" wyes. Neither opportunity itemizes elbows as a priced line item or scope element.

The code shows little relevant recent activity. The mismatch between the nominal commodity (elbows) and the actual work being procured (gravity sewer and water main replacement using mainline pipe and service-connection fittings such as wyes and tees) suggests either a tagging error in the procurement system or that elbows represent an incidental material cost absorbed into larger pipe-and-fitting or trench-excavation line items rather than a distinct procurement category at the state and local level. Business development professionals should verify the correct UNSPSC classification for gravity sewer and water main component supply before positioning offerings in this market segment.