UNSPSC 30264010: Carbon steel SAE 1100 series hot dip galvanized hot rolled sheet

Hot rolled sheet of various thicknesses produced from SAE 1500 carbon steels and to which zinc coating is applied via an immersion process

UNSPSC 30264010 Carbon steel SAE 1100 series hot dip galvanized hot rolled sheet is a Commodity code that nominally addresses structural steel sheet material, yet the recent opportunities tagged under this code show little relevant procurement activity. The most concrete steel-related opportunities posted in the recent window involve structural components—the Illinois Department of Agriculture solicited I-beams and metal plates under basic ordering agreements (April 2026), and the Georgia Department of Corrections issued an RFQ for steel supply to Georgia State Prison (August 2026, due September 12, 2026). The remaining opportunities in the dataset—park renovation and athletic field work (City of Port Wentworth, Georgia, RFP due November 13, 2026), water main replacement (City of Leesburg, Florida, IFB due June 18, 2026), bridge replacement (Orange County, Florida, IFB due July 7, 2026 with an estimated project cost of $6,202,246.05), residential housing rehabilitation (Pinal County, Arizona, JOC due October 9, 2026), mobile welding services (Hillsborough County, Florida, ITB due September 16, 2026), plumbing supplies (Columbus Consolidated Government, RFP due September 2, 2026), and plumbing services (Prince George's County, Maryland, RFP due June 25, 2026)—do not align with the nominal scope of hot-dip galvanized carbon steel sheet and appear to represent mislabeled or broad catch-all coding by issuing agencies rather than genuine demand for this specific material.

Issuing bodies tagged to the code span state departments, county governments, and city procurement offices across Georgia, Florida, Arizona, Illinois, and Maryland, but the concentration of truly applicable steel-sheet demand remains opaque. The Georgia Department of Corrections solicitation for steel supply to a state prison is the clearest potential match, though the RFQ does not specify material grades or quantity. Small-purchase structural steel orders from the Illinois Department of Agriculture (BOAs for I-beams and metal plates with contract values of $3,900.00 and $6,388.00 respectively) suggest occasional institutional demand for fabricated stock, but neither explicitly calls for hot-dip galvanized SAE 1100 series sheet. Geographic activity centers on the Southeast and Southwest, with Illinois representing institutional purchasing. Without clear line-item specifications in these solicitations or evidence of regular procurement cycles targeting this material grade, the code shows limited actionable signal for suppliers of hot-dip galvanized carbon steel sheet at present.