SOURCE SPHERE FOR RADIOMETRIC CALIBRATION
Added: Oct 15, 2010 6:09 pm NASA/ARC is hereby soliciting information about potential sources for anIntegrating Source Sphere for Radiometric Calibration to be used in the Airborne SensorFacility. Please see the attached document for specifications. No solicitation exists; therefore, do not request a copy of the solicitation. If asolicitation is released it will be synopsized in FedBizOpps and on the NASA AcquisitionInternet Service. It is the potential offerors responsibility to monitor these sitesfor the release of any solicitation or synopsis.Interested offerors/vendors having the required specialized capabilities to meet theabove requirement should submit a capability statement of 10 pages or less indicating theability to perform all aspects of the effort described herein.Responses must include the following: name and address of firm, size of business;average annual revenue for past 3 years and number of employees; ownership; whether theyare large, small, small disadvantaged, 8(a), HUBZone, and/or woman-owned; number of yearsin business; affiliate information: parent company, joint venture partners, potentialteaming partners, prime contractor (if potential sub) or subcontractors (if potentialprime); list of customers covering the past five years (highlight relevant workperformed, contract numbers, contract type, dollar value of each procurement; and pointof contact - address and phone number). Technical and Procurement related questionsshould be directed to: Cistine.M. Benavides@nasa.govPlease advise if the requirement is considered to be a commercial or commercial-typeproduct. A commercial item is defined in FAR 2.101.This synopsis is for information and planning purposes and is not to be construed as acommitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Respondents deemedfully qualified will be considered in any resultant solicitation for the requirement. The Government reserves the right to consider a small business or 8(a) set-aside based onresponses hereto. All responses shall be submitted to Cistine M. Benavides, M/S 241-1Moffett Field, CA 94035-0001 or by email at Cistine.M.Benavides@nasa.gov no later than12:00 Noon Pacific Standard Time (PST) on October 21, 2010. Please referenceNNA11357573R in any response. Any referenced notes may be viewed at the following URLslinked below. NNA11357573R-AMG National Aeronautics and Space Administration Ames Research Center
10/15/10, 6:09 PM Plate Rolling Machine
Added: Oct 12, 2011 2:51 pm Action Code: Presolicitation Notice Date: October 12, 2011Classification Code: 3422Contracting Office Address: DLA AVIATIONINDUSTRIAL PLANT EQUIPMENTATTN: DLA-VICA8000 Jefferson Davis HighwayRichmond, Virginia 23297Subject: Request procurement of a Plate Rolling MachineSolicitation Number: SPM4A8-12-X-0005Closing Response Date: October 28, 2011Point of Contact: L. Ashli ButricoEmail: Lauren.Butrico@dla.milDescription: Plate Rolling Machine in accordance with Purchase Description DLA-A-VIBB-11-40-1007, dated September 20, 2011. Item will be delivered to Mechanicsburg, PA 17050.This requirement is being solicited in accordance with FAR 6.2, full and open competition after exclusion of sources. The award will be made as a firm-fixed price contract. The award shall be based on technically acceptable, lowest offer. The performance period is 30 calendar days after receipt of order. FOB at Destination and Inspection/Acceptance at Destination.This is a presolicitation notice only. This solicitation will be available on DIBBS October 17, 2011. A copy of the solicitation will be available via DIBBS at https://www.dibbs.bsm.dla.mil/. Choose the RFP you wish to download. Solicitations are in portable document format (PDF). To download and view these documents you will need the latest version of the Adobe Acrobat reader. This software is available free at http://www.adobe.com.All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Proposals must be submitted to: Lauren Butrico via email @ Lauren.Butrico@dla.mil no later than the close of business E.S.T. listed as the closing response date on page one (1). All proposals received after the closing date listed will be considered "late" and will not be considered for award.Archiving Policy: Automatic/15 days after response date. SPM4A8-12-X-0005 Defense Logistics Agency Aviation
10/12/11, 2:51 PM Sheet Metal Plate Roll
Added: Oct 23, 2009 10:09 am PROPOSED SOLE SOURCE SOLICITATION: Baileigh Industrial IncThe Government intends to solicit and negotiate with only one source under the authority of FAR 13.106-1(b)(2) and FAR 6.302-1(a)(2)(i). Proposed source is Baileigh Industrial Inc (CAGE: 3A2H5, NAICS: 333516). This notice of intent is not a request for competitive quotations: however, all quotations/responses received within FIVE (5) days of issuance of this notice will be considered by the Government. Further determination by the government not to compete this proposed contract action based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Any quotations should e-mailed to Jennifer Kleiv at jennifer.kleiv@wpafb.af.mil no later than 30 Oct 09. Only proposals received by this date will be considered. Any questions should be directed to Jennifer Kleiv at 937-522-4629.The 88th Contracting Squadron, Wright-Patterson Air Force Base, Ohio intends to award a firm-fixed-price contract for the following requirement:CLIN 0001: PR-611 - 220 Volt Tee Phase Plate Roll, 72" Forming With, 11 Gauge Mild steel Capacity. Needs to include Coning Attachment, Motorized Back Roll with 3 wire Grooves, and Digital Display for Back Roll Position. Unit must have remote foot operated feed controls with emergency stop, and digital display at the controls and emergency stop wire around the machine. Must have 5.118" upper roll diameter. Rolls must be driven at 8 rpm. Unit must have 2 driven rolls. This unit is required to fabricate leading edge wing sections for aircraft, and ICBM Rocket trunk sections.It is the offeror's responsibility to be familiar with the applicable clauses and provisions. Clauses and provisions may be accessed via the Internet at website http://farsite.hill.af.mil. The following clauses and provisions are incorporated by reference and are to remain in full force in any resultant purchase order: FAR 52.212-1, Instructions to Offerors-Commercial Items-(Jan 2006), and any addenda to the provision as listed in this noticeFAR 52.212-2, Evaluation-Commercial Items-(Jan 1999) (Award will be made based upon best value to the government)FAR 52.212-3, Offeror Representations and Certifications-Commercial Items-(Mar 2005) (Offeror must complete the representation and certifications and submit with offer. An offeror shall complete only paragraph (j) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov)FAR 52.212-4, Contract Terms and Conditions-Commercial Items-(Sep 2005)FAR 52.212-5 (Deviation), Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items-(Apr 2006)FAR 52.204-7, Central Contractor Registration (Oct 2003)FAR 52.204-9; Personal Identity Verification of Contractor Personnel-(JAN 2006) FAR 52.219-6, Notice of Total Small Business Set-Aside-(Jun 2003)FAR 52.222-3, Convict Labor-(Jun 2003); FAR 52.222-21, Prohibition of Segregated Facilities (Feb 1999); FAR 52.222-26, Equal Opportunity (Apr 2002)FAR 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans-(Dec 2001)FAR 52.222-36, Affirmative Action for Workers with Disabilities-(Jun 1998)FAR 52.222-37, Employment Reports on Disabled Veterans and Veterans of the Vietnam Era and Other Eligible Veterans-(Dec 2001)FAR 52.223-5, Pollution Prevention and Right-to Know Information-(Aug 2003)FAR 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration-(Oct 2003)FAR 52.233-1, Disputes-(Jul 2002)FAR 52.233-3, Protest After Award-(Aug 1996)FAR 52.233-4, Applicable Law for Breach of Contract Claim-(Oct 2004)FAR 52.237-2, Protection of Government Buildings, Equipment, and Vegetation (Apr 1984)FAR 52.247-4, F.O.B. Destination (Nov 1991)FAR 52.252-1, Solicitation Provisions Incorporated by Reference (Feb 1998) http://farsite.hill.af.mil.FAR 52.252-2, Clauses incorporated by Reference-(Feb 1998) (http://farsite.hill.af.mil); FAR 52.252-3, Alterations in Solicitation (Apr 1984)FAR 52.252-4, Alterations in Contract (Apr 1984)FAR 52.252-6 Authorized Deviations in Clauses (Apr 1984) is amended in paragraph (b) to add ?Department of Defense Federal Acquisition Regulation Chapter 2-(Apr1984)FAR 52.253-1 Computer Generated Forms-(Jan 1991)DFARS 252.204-7004, Alternate A-(Nov 2003)DFARS 252.204-7003, Control of Government Personnel Work Product-(Apr 1992)DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items-(Dec 2005)DFARS 252.225-7035 with Alt I, Buy American Act-Free Trade Agreements-Balance of Payments Program Certificate (Jun 2006)DFARS 252.225-7036 with Alt I, Buy American Act-Free Trade Agreement-Balance of Payments Program-(Jun 2006)DFARS 252.232-7003, Electronic Submission of Payment Requests-(May 2006)DFARS 252.232-7010 Levies on Contract Payments (Sep 2005)DFARS 252.243-7001, Pricing of Contract Modifications-(Dec 1991)DFARS 252.247-7023 with Alt III, Transportation by Sea (May 2002)AFFARS 5352.242-9000, Contractor Access to Air Force Installations-(Jun 2002)AFFARS 5352.223-9001, Health and Safety on Government Installations-(Jun 1997). AFFARS 5352.201-9101 Ombudsman (August 2005).In Accordance with DFARS 252.232-7003, Invoicing and payments must be made utilizing the Wide Area Work Flow (WAWF) - To register and submit invoice go to https://wawf.eb.mil. Payment information may be accessed using the DFAS website at https://www.dfas.mil. Your purchase order/contract number or invoice will be required to inquire status of your payment.A Firm-Fixed Price purchase order will be issued in writing. To be eligible to receive an award resulting from this solicitation, contractor must be registered in the Central Contractor Registration. To register you may call 1-888-227-2423 or apply via the Internet at http://www.ccr.gov. The quote format is at the discretion of the offeror. Include FAR 52.212-3, Offer Representation and Certification with Offer or indicate it is available at the ORCA website. FA8601-10-T-0037 Department of the Air Force Materiel Command Lifecycle Management Center Wright Patterson Air Force Base
10/23/09, 10:09 AM flatbar mild steel hot roll
Added: May 31, 2012 2:06 pm This is a combined synopsis/solicitation for services prepared in accordance with the format in subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation WILL NOT be issued. The solicitation number is HSCG29-12-Q-3JM549. This combined synopsis constitutes a solicitation and incorporates provisions and clauses in effect tough Federal Acquisition Circular 2007. This acquisition is unrestricted. The NAICS is 333516. The contract type will be a firm fixed price purchase order. The government proposes to solicit from the attached scope of work / or / quotes for the attached items. Federal Acquisition Regulation (FAR) Clauses and Department of Labor Wage Rates for Services are included in this order and are applicable.Vendors doing business with the Coast Guard must be registered or be willing to register with the Central Contracting Registration at www.ccr.gov.Email all quotes to SK3 Taneka Milton at taneka.a.milton@uscg.mil HSCG29-12-Q-3JM549 Department of Homeland Security US Coast Guard
5/31/12, 2:06 PM Four (4) Roll Plate Bending Machine
Added: Oct 28, 2008 3:31 am Thie is an Request For Information (RFI) for a 4 Roll Plate Bending Machine. Currently there is no solicitation. We are seeking sources who could potentially provide such a machine in anticipation of and in planning for a solicitiation. Please provide your best price quote and estimated delivery time for a piece of equipment satisfying the specifications in the attachment. Quote delivery to any point of your choosing in the Iraq-Kuwait Theater of operations. Ultimately, this piece of equipment is needed at a factory south of Fallujah, Iraq. Responses to this RFI will determine whether the govt will pursue a solicitation or not, so once again, please provide your best price quote and quickest but most reliable delivery date/time. DO NOT contact the RCO CAMPEN in regards to this sources sought. I am the sole POC if you have any questions. I have only an email address and a DSN phone, so I apologize in advance for my lack of communication capability. W90VCM-BENDING United States Marine Corps
10/28/08, 3:31 AM