Embroidery Machine
Added: Jun 18, 2012 12:57 pm
COMBINED SYNOPSIS/ SOLICITATION FOR COMMERCIAL ITEMS(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are requested and a written solicitation will not be issued.(ii) This solicitation/synopsis reference number is F1MTGT2128A001 and is being issued as a Request for Quote (RFQ).(iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-59.(iv) This acquisition is 100% set-aside for small businesses. The associated NAICS code is 333292 with a 500 employee size standard.(v) Contractors shall submit a lump sum quote for TAJIMA TFMX-C502/450 OR EQUAL Embroidery Machine (1each).(vi) TAJIMA TFMX-C502/450 OR EQUAL Embroidery Machine on Joint Base Charleston, South Carolina. (See attached request for quotation)(vii) Delivery shall be completed FOB Destination within 30 days of award.(viii) The following clauses and provisions are incorporated and will remain in full force in any resultant award: (full text of clauses and provisions may be accessed electronically at this website: http://farsite.hill.af.mil)FAR 52.212-1, Instructions to Offerors - Commercial.FAR 52.212-2, Evaluation - Commercial Items Evaluation. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate offers in the following relative order of importance: 1. Technical capability of the item offered to meet the Government requirement. Technical and performance factors, when combined, are significantly more important than price. 2. Price - The Government will evaluate the total price of the offer for award purposes.(ix) All offerors shall include a completed copy of FAR 52.212-3, Offeror Representation and Certifications -- Commercial Item or complete electronic annual representations and certifications at http//orca.bpn.gov.(x) The following clauses are incorporated by reference:• FAR 52.212-4, Contract Terms and Condition-Commercial Items• FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (May 2009) (Deviation) are incorporated by reference, however, the following clauses apply:• FAR 52.222-21, Prohibition Of Segregated Facilities• FAR 52.222-22, Previous Contracts and Compliance Reports• FAR 52.222-26, Equal Opportunity • FAR 52.222-36, Affirmative Action for Workers With Disabilities • FAR 52.225-1, Buy American Act - Supplies Offerors are reminded that the Buy American Act restricts the purchase of supplies that are not domestic end products. • FAR 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration(xi) The following additional clauses are applicable to this procurement.• FAR 52.211-6, Brand Name or Equal • FAR 52.219-1, Small Business Program Representations.• FAR 52.219-6, Notice of Total Small Business Set-Aside • FAR 52.219-28, Post Award Small Business Representation • FAR 52.222-50, Combating Trafficking in Persons • FAR 52.225-13, Restrictions on Certain Foreign Purchases • FAR 52.223-15, Energy Efficiency in Energy-Consuming Products • FAR 52.228-5 Insurance-Work on a Government Installation • DFARS 252.204-7004 Alternate A, Required Central Contractor Registration; Contractors not registered in the CCR will be ineligible for award (register at http://www.ccr.gov/ or call 1-800-334-3414).• DFARS 252.209-7999, Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law.REPRESENTATION BY CORPORATIONS REGARDING AN UPDAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (DEVIATION 2012-O0004) (JAN 2012)(a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012, (Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that -(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government.(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension of debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.(b) The Offeror represents that -(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability,(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.(End of provision)• DFARS 252.225-7000, Buy American Act (BAA) - Balance of Payments Program Certificate • DFARS 252.225-7002, Qualifying Country Sources as Subcontractors • DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/. The WAWF routing information will be provided upon award.)(xii) Response to this combined synopsis/solicitation must be received via email, fax, mail, or delivery by 29 Jun 2012 no later than 12:00 PM Eastern Standard Time. Requests should be marked with solicitation number F1MTGT2128A001(xiii) Address questions to Stanley Farr,Contract Specialist, at (843) 963-4485, fax (843) 963-5183, email stanley.farr@us.af.mil or Robert R. Melton, Contracting Officer, Phone (843) 963-5157, email robert.melton.6@us.af.mil.For more opportunities, visit http://www.airforcesmallbiz.org (see Contract Opportunities at the right side-bar. Direct link: http://airforcesmallbiz.org/opportunities/index.php)Also see http://www.sba.gov
F1MTGT21128A001 Department of the Air Force Air Mobility Command
6/18/12, 12:57 PM Static Table Cutting System. BRAND NAME OR EQUAL
Added: Aug 23, 2012 11:16 am
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is issued as a request for quotation (RFQ).0001 Eastman Static Table Cutting System, Model M9000 "Or Equal".FOB Destination Pricing is required to include installation and training, no deviation.This is a Brand Name or Equal acquisition; in accordance with FAR 52.211-6, to be considered for award, offers of "equal" products and must meet the following salient physical, functional, or performance characteristics/minimum requirements:1. Table must be 78" width (76.6" Addressable) x 16' Length (12' Addressable)2. Cutting Gantry must have Brushless DC Servo motor control, Synchronized Dual X-axis servos, dedicated Y-axis servo3. Cutting Gantry must have a Working Range (addressable) of X-axis (12'), Y-axis (76.6"), maximum plotting and cutting speed ((152.4cm/s, maximum acceleration (1.3 G)4. Cutting Gantry must have Onboard Control Panel with full interface terminal and joystickPC Boards must be conformal coated.5. Must be constructed of machined aluminum alloy and have a clear anodized finish.6. Must have safety feature of two stop discs and two remote emergency stops.7. Tool Head must be a Three Tool Cutting Head with pen lift assembly.8. Tool Head must have one 1" Round Blade Mount, one 2" Round Blade Mount and one 5mm Drag Blade Mount.9. Tool Head must come with spare 1"Round, 2" Round and 5mm Drag Blades.10. Must come with Tool Depth Gauge and Depth Limiters.11. Must have Laser Diode Alignment Tool.12. Must have a theta axis servo-drive brushless motor.13. Must have electronic pressure control of all tools.14. Must come with a Diagnostic and Electronic Control Cabinet.15. Control Cabinet will be constructed of heavy gauge powder coated steel.16. Control Cabinet will have a containment unit for all power and control hardware.17. Control Cabinet will be completely sealed and pressurized to prevent contamination.18. Control Cabinet will have diagnostic LED indicators that provide operational status.19. Must operate at 220V, Single Phase, 60Hz.20. Static Table must be of heavy duty welded construction.21. Static Table must have a precision ground linear rail.22. Static Table must have 12 DP rack and pinion drive system.23. Static Table must have one 7.5 HP high blower and silencer.24. Static Table must have two manual blast gates.25. Static Table will have a custom tempered porous plastic cutting surface.26. Static Table will be under table cantilevered cable festooning for full table accessibility.27. Operating System Software must be Motion Control Multi-Axis Control Computer.28. Operating System must be Microsoft Windows.29. Operating System computer will come with a 17" Flat Screen Monitor, mouse and 104+ keyboard.30. Operating System computer will come with EasiCut2 Windows Cutter Control and Management Software.31. Must come with complete one week on-site system integration installation and training.32. Must come with 1 year warranty (or 2,000 operating hours, whichever comes first) on non-consumable parts.33. Must come with 1 year software subscription and technical support.34. Material Handling Equipment will consist of A-frame Material Roll Rack which includes: industrial grade 6" casters (2 rigid,2 swivel), locking floor jack for stationary use, 8 bars, brackets, bearing sets. 35. A-Frame Material Rack must be able to support 2,000 pounds total or 250 pounds per bar.36. Additional software will consist of PatternPRO Design and Nesting Software which includes pattern design, marker making and file import.37. System will come with Accugrid Digitizer 44"x60 with stand.FAR 52.212-1 Instructions to Offerors - Commercial applies to this acquisition.Offerors shall include a completed copy of the provision at FAR 52.212-3 Offeror Representations and Certifications - Commercial Items (Not required if ORCA registered or the new current system; SAM).FAR 52.212-4 Contract Terms and Conditions - Commercial Items applies to this acquisition.FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items applies to this acquisition.Offer due 4:00 PM CST 7 Sep 2012.POC: Steven Honeck, 210-295-7433
W45PVN-12-Q2746 Department of the Army Materiel Command Joint Munitions Command
8/23/12, 11:16 AM --One 24 inch industrial computer dobby loom.
Added: Jan 14, 2009 10:45 am
Under the authority of FAR 13.5, the U.S. Army Natick Contracting Division, Kansas Street, Natick, MA on behalf of the United States Army-Soldier Systems Center, Natick, MA intends to negotiate and award a contract on a sole source basis with AVL Looms, Inc., of 3851 Morrow Lane #9, Chico, CA 95928, to provide an industrial computer dobby loom. This loom will be used by NSRDEC to produce a fully customizable range of woven constructions. Only computer-dobby looms can provide the required degree of production flexibility. AVL Looms is the only US manufacturer of computer-dobby looms. No solicitation document is available. Any Questions concerning this acquisition may be addressed to the above address, Attention: John Conlin or by email to john.conlin3@us.army.mil. This synopsis expires 20 January 2009 12:00pm.
W91A2K83521004 Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground
1/14/09, 10:45 AM