Max-Bantam Nontabbibg Sheet Counter
Added: Nov 03, 2011 12:14 pm Contract Award BEP-RFQ--12-0002 Department of the Treasury Office of the Comptroller of the Currency
11/3/11, 12:14 PM Extraction Insertion Device for Tires
Added: Aug 19, 2011 3:33 pm The Mission and Installation Contracting Command - Installation Contracting Office, Fort Campbell, KY, has a requirement for Model SEID-20 Scorpion Insertion Device. The Model SEID-20 is the only known piece of equipment that meets performance requirements to satisfy mission need of the Installation Maintenance Division (IMD), Directorate of Logistics (DOL). These requirements are necessary to safely and efficiently remove and install tires on rims used on the Mine Resistant Ambush Protected Vehicles (MRAPs) and for repairing HUMVEE wheel assemblies for NMP (National Maintenance Program). Specific capabilities include: capability to extract and insert run flat tire inserts; change tires up to 20" in diameter; have less than a 20-minute cycle time; can be used by single operator; can be moved with a forklift in a single move. The Model SEID-20 Extraction Insertion Device is the only known piece of equipment that meets the Government's requirements. The procurement will be conducted on a sole source basis in accordance with the FAR 13.106-1(b)(1) For purchases not exceeding the simplified acquisition teshold, contracting officers may solicit from one source if the contracting officer determines that the circumstances of the contract action deem only one source reasonably available (e.g., urgency, exclusive licensing agreements, brand name or industrial mobilization). The Agency intends to enter into a firm-fixed-price contract with DJM Manufacturing & Sales, LLC. The basis for restricting competition is that DJM Manufacturing & Sales, LLC, Elizabeth City, North Carolina, manufactures the Model SEID-20, the only known equipment capable of meeting the Government's needs. NAICS code for this procurement is 333329 and the small business size standard is 500 employees. This sole source requirement will be procured under Simplified Acquisition Procedures and Other Than Full and Open Competition, and awarded on an Unrestricted basis. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE OFFERS and solicitation will not be issued; however, any firm that believes it can meet the requirements may give written notification to the Contracting Officer within 10 days from the date of the publication of this synopsis. Supporting evidence must be furnished in sufficient detail to demonstrate the ability to comply with the requirements listed. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion for the Government. If no responses are received, the Government will proceed with the sole source negotiation with the manufacturer, DJM Manufacturing & Sales, LLC. Responses are due by 29 August 2011 2:00 P.M. (CT). Responses shall be submitted via e-mail to the following address: erin.e.kohl@us.army.mil or faxed responses will be accepted at (270) 798-7855. Telephone requests or inquires will not be accepted. The points of contact are Erin Kohl, (270) 798-7561, erin.e.kohl@us.army.mil or June Fletcher-Schiewe, (270) 798-3441, linda.j.fletcherschiewe@us.army.mil. W9124811KOHL1 Department of the Army Materiel Command Mission and Installation Contracting Command Fort Campbell
8/19/11, 3:33 PM ON-LINE GAUGING SYSTEM TO MEASURE BASIS WEIGHT, MOISTURE CONTENT, AND COLOR/BRIGHTNESS ON THE NIST PILOT PAPER MACHINE
Added: Aug 15, 2008 10:10 am THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR SUBPART 13.5 TEST PROGRAM FOR CERTAIN COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect tough Federal Acquisition Circular (FAC) 2005-26. **DETAILS OF COMBINED SYNOPSIS/SOLICITATION IN UPLOADED FILE** SB1341-08-RQ-0590 Department of Commerce National Institute of Standards and Technology
8/15/08, 10:10 AM Box Maker Machine Maint
Added: Apr 30, 2012 2:04 pm The DLA Distribution Acquisition Operations Directorate intends to issue a sole source order to The Entwistle Company for the repair of a Box Maker Machine and printer located at DLA Distribution Oklahoma City, Oklahoma. Rite-Size (a division of the Entwistle Company) is the original manufacturer of this machine and maintains the proprietary rights and security aspects that make them the only source of supply and repair.The NAICS Code for this procurement is 333291The proposed contract action is for repair and upgrade services for which the Government intends to solicit and negotiate with only one source under the authority of 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within ten days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This solicitation is restricted to The Entwistle Company. 1940 Halifax Rd. Danville, VA 24540-5820. Offers from concerns other than the above are not solicited.All responsible sources may respond by submitting qualifications/capabilities of the company to provide Box Maker Machine (Model BMCL-84E, Serial Number 1229) and Spot Printer (Model SP-84E, Serial Number 517) repair by 12:00 P.M. (Noon) EST, MAY 11th, 2012, to Michael Minto, Acquisition Operations, J7-AB, J Avenue, Bldg. 404, new Cumberland, PA 17070, Phone: 717-770-6145, FAX: 717-770-7591 or email: Michael.Minto@dla.mil for consideration by the agency. If no affirmative responses are received by the date specified above to determine whether a qualified source is more advantageous to the Government, a purchase order will be negotiated and awarded to The Entwistle Company. SP3300-12-Q-0058 Defense Logistics Agency Distribution
4/30/12, 2:04 PM Die Cutting Press (Corrugated Box Maker) for DLA Distribution Oklahoma City, OK
Added: May 15, 2012 1:36 pm DLA Distribution Oklahoma City, Oklahoma has a requirement for a Contractor to provide one Die Cutting Press including delivery, installation, testing, and training to include all labor and materials. This acquisition is 100% set-aside for Small Business Concerns. The North American Industry Classification System (NAICS) code for this requirement is 333291 and the small business side standard is 500 employees. This acquisition will be conducted in accordance with FAR Subpart 15 Contracting by Negotiation in conjuction with FAR Part 12 Acquisition of Commercial Items. It is anticipated that Request for Proposal SP3300-12-R-0023 will be posted to this site between May 28 and June 8, 2012. Amendments to the Request for Proposal will also be posted to this site. Prospective offerors are cautioned concerning their responsibility to access the website for any amendments that may be issued under the solicitation. There will be no advance notification of amendment issuance. NOTE: All offerors MUST be registered in the Central Contractor Registration (CCR) Database at http://www.ccr.gov or an award cannot be processed. The Government intends to award a contract resulting from this solicitation to the responsible offeror(s) using lowest priced technically acceptable source selection procedures in accordance with FAR 15.101-2, as supplemented. Award will be made to the technically acceptable offeror with the lowest evaluated cost or price, who is deemed responsible in accordance with the FAR, and whose proposal conforms to the solicitation requirements. The Government intends to award without discussions, therefore, each initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if determined necessary by the contracting officer and anticipate using reverse auctioning techniques if determined to be in the best interest of the Government during discussions. Offerors are encouraged to visit the commercial reverse auction service provider's website https://govauctions.procuri.com. Failure to submit all the information requested by the solicitation may result in the proposal being eliminated from consideration for award. All responsible Small Business offerors will be required to submit their offers, with current pricing, Cage Code, Dun and Bradstreet Number, Federal ID Number, Company name, Address, Phone Number, Facsimile Number, Email Address, and Point of Contact to: Kimberly LeCates, Contract Specialist, DLA Distribution, Acquisition Operations, J7-AB, J Avenue, Bldg 404, New Cumberland, PA 17070-5001 or via fax: 717-770-7244 or e-mail: kimberly.lecates@dla.mil SP3300-12-R-0023 Defense Logistics Agency Distribution
5/15/12, 1:36 PM