VC Displays, Inc.
VC Displays, Inc., operating as VC Displays Inc. Division and doing business as VC Displays Inc., is a for-profit Subchapter S Corporation based in Spring Hill, Florida. The company specializes in providing a wide range of display products, components, and hardware to various agencies within the U.S. Department of Defense. As a registered vendor with the federal government since June 1, 2005, VC Displays, Inc. has established itself as a key supplier of aircraft parts, seals, bolts, nuts, and other critical components for military aviation and logistics programs.
Through numerous federal contract awards, VC Displays, Inc. has supplied an extensive array of items to the Defense Logistics Agency (DLA) Aviation and DLA Land and Maritime. These products include, but are not limited to, aircraft fairings, pressure gauges, structural fittings, wheel halves, cable assemblies, couplings, clamps, bolts, nuts, seals, spacers, retainers, and various electronic components. The company has received both set-aside and non-set-aside contracts, demonstrating its ability to compete in multiple procurement categories. Notable awards include a $10,979,210.95 delivery order for the KC-46 Initial Spares (KIS) program, supporting the KC-46A Tanker Modernization effort, and multiple smaller purchase orders ranging from a few hundred to tens of thousands of dollars for specialized aircraft components.
VC Displays, Inc. holds several significant Indefinite Delivery Contracts (IDCs) with federal agencies. A recent $250,000 single-award IDC from DLA Aviation and DLA Land and Maritime, set to run from March 2024 to March 2029, allows the company to provide gear set bevel match components as needed. Another $250,000 single-award IDC from DLA Land and Maritime, awarded in February 2024 with a one-year performance period, focuses on supplying nonmetallic hoses to various DLA depots. These IDCs, along with the company's position on a $485 million multiple-award indefinite delivery contract for the KC-46 Tanker Modernization program, underscore VC Displays, Inc.'s important role in supporting U.S. military aviation and logistics operations through the consistent supply of critical components and equipment.
TJXMKJX9NLN5 423860
Not listed 15250 Flight Path Dr, Brooksville, FL 34604, USA
6/1/05 1/24/26 The Boeing Company
The Boeing Company, through its Defense division doing business as Boeing, is a major aerospace and defense contractor providing a wide range of products and services to the U.S. federal government. As the world's largest aerospace company, Boeing specializes in the design, manufacture, and support of commercial jetliners, military aircraft, satellites, missile defense systems, and human space flight. For the federal government, Boeing primarily supplies aircraft, aircraft parts and components, logistics services, maintenance support, and engineering services for various military programs. The company's expertise spans multiple domains, including maritime patrol, aerial refueling, rotorcraft, and space systems.
Boeing has received numerous prime and subcontract awards from various federal agencies, including the Department of Defense, Navy, Army, Air Force, and Defense Logistics Agency. These contracts cover a diverse array of goods and services, such as spare parts for the P-8A Poseidon maritime patrol aircraft, KC-46A aerial refueling tanker, and AH-64 Apache and H-47 Chinook helicopters. The company provides critical components like aircraft ducts, fans, control panels, electrical systems, and structural elements. Boeing also delivers maintenance, repair, and overhaul services, as well as engineering support and logistics management. Notable contracts include work on the P-8A Engine Depot Maintenance and Repair program, KC-46 over and above labor, and various research and development initiatives. While most contracts are awarded without set-aside designations, Boeing often collaborates with smaller businesses as subcontractors or suppliers.
The Boeing Company holds significant Indefinite Delivery/Indefinite Quantity (IDIQ) contracts that enable federal agencies to procure goods and services efficiently. A $75 million single-award IDIQ from the Naval Air Systems Command focuses on P-8A aircraft spare parts, supporting the Navy's maritime patrol capabilities. The company has received multiple delivery orders under this vehicle for various P-8A components. Additionally, Boeing was awarded a $485 million multiple-award IDIQ by the Air Force Materiel Command Lifecycle Management Center for KC-46 support equipment. This ten-year contract, part of the KC-46A Tanker Modernization program, allows the Air Force to obtain spare parts, maintenance services, and engineering support for the aerial refueling tanker. These IDVs demonstrate Boeing's critical role in sustaining and modernizing key military aircraft platforms, providing the government with flexible procurement options for long-term support of essential defense capabilities.
WZWRLY4G3PL8 336411
Not listed 7755 E Marginal Way S, Tukwila, WA 98108, USA
4/11/02 11/26/25 Industrial Automation Inc.
Industrial Automation Inc. is a leading provider of aircraft maintenance tooling and ground support equipment based in Seattle, Washington. As a Boeing licensed OEM, the corporate entity manufactures high-quality aviation products and services to support military and commercial aviation programs.
Through prime federal contract awards, Industrial Automation Inc. has provided various peculiar support equipment, tooling, and parts in support of naval aviation platforms including the P-8A Poseidon, CH-53K King Stallion, and F/A-18 Hornet. Major customers include NAVAIR and its Naval Air Warfare Center research labs. Deliverables range from radar system components and pylon handling adapters to horizontal stabilator inspection sets and hydraulic servicing units. Awards are primarily firm fixed price vehicles with no set-aside provisions. As a subcontractor, Industrial Automation Inc. has provided cable assemblies and other unspecified system support capabilities. Additionally, the company was awarded a $485 million ceiling IDIQ by the Air Force Life Cycle Management Center to potentially provide diverse sustainment requirements for the KC-46A aerial refueling tanker over a 10 year ordering period.
Currently held IDIQs focus on naval platforms and include the procurement of MQ-25 cables and other unspecified supplies with single award ceilings below $300,000. Two orders issued to date under one such vehicle were simply for delivery of the same domestic part number. Another single award IDIQ held by Industrial Automation Inc. allows for annual orders of cable assemblies in support of Navy programs through 2025.
ZNGLLCFNMR41 336413
Not listed 1421 S 93rd St, Seattle, WA 98108, USA
3/18/02 10/30/25 AAR Government Services Inc.
AAR Government Services Inc., a subsidiary of AAR Corp., is a leading provider of aviation maintenance, logistics, modification, and support services to U.S. defense, government, and commercial customers. The company specializes in delivering a wide range of services including depot maintenance, contractor logistics support, spare parts procurement, and engineering support for various aircraft platforms. As an independent aviation services provider, AAR Government Services leverages its expertise to secure prime federal contracts and subcontracts from agencies such as the Department of the Air Force, Department of the Navy, and Department of State.
Through its federal contract awards, AAR Government Services has provided extensive support for major defense programs and aircraft fleets. The company has performed scheduled and unscheduled depot maintenance on naval aircraft like the P-8A Poseidon, as well as contractor logistics support for Air Force C-130J and Navy C-40A transport aircraft. AAR has also secured high-value contracts for F-16 depot maintenance services, KC-46 initial spares, and landing gear performance-based logistics. Additionally, the company has supported the Bureau of International Narcotics Law Enforcement with aviation services for worldwide locations. AAR's work often involves collaborating with major subcontractors like Boeing, Raytheon, Honeywell, and General Electric to deliver comprehensive support services.
AAR Government Services holds several significant indefinite delivery contracts (IDVs) with federal agencies. These include a $1.095 billion contract with the Air Force Materiel Command for F-16 depot maintenance services through 2032, a $1.89 billion contract with the Air Force Lifecycle Management Center for KC-46 initial spare parts through 2027, and a $485 million contract for KC-46 support equipment through 2033. The company also holds a $365 million single-award contract for F-16 depot repair and SLEP overhaul work for U.S. Air Forces in Europe. These IDVs allow various agencies to issue task orders for AAR's services, ranging from aircraft maintenance and repair to spare parts procurement and engineering support, demonstrating the company's comprehensive capabilities in supporting major military aircraft programs.
GFWVNNYFEVR2 488190
Not listed 1100 N Wood Dale Rd, Wood Dale, IL 60191, USA
11/21/17 5/1/25 NDT Solutions, LLC
NDT Solutions, LLC, doing business as NDT Solutions LLC, is a leading provider of non-destructive testing (NDT) equipment and services to the U.S. federal government. Registered in SAM.gov since July 2001, the company is structured as a for-profit corporate entity and limited liability company, specializing in the manufacture of goods. NDT Solutions offers a wide range of non-destructive testing solutions, including equipment, maintenance, calibration, and inspection services, primarily supporting defense and homeland security programs across various federal agencies. The company's expertise in NDT technologies enables it to deliver critical support for the maintenance, inspection, and modernization efforts of military aircraft and equipment.
NDT Solutions has received numerous prime contract awards from the Department of the Navy, Department of the Air Force, and Department of Homeland Security. These awards encompass a diverse array of services and products, including annual calibrations and evaluations of Mobile Automated Scanner (MAUS) systems, delivery of eddy current probes, maintenance of MAUS equipment, and inspection of rough machined forgings. Notable projects include the provision of a mobile automated ultrasonic scanning system (AUSS) for legacy aircraft inspection, MAUS maintenance for Grand Forks Air Force Base, and calibration services for the Naval Air Warfare Center. The company has also performed as a subcontractor to Northrop Grumman Systems Corporation, providing computer hardware and office supplies. Some contracts were designated as total small business or woman-owned small business set-asides, indicating NDT Solutions' status as a small business entity.
NDT Solutions holds several significant Indefinite Delivery Vehicles (IDVs) with federal agencies. A $6.1 million single-award IDC with the Air Force Materiel Command covers the delivery of a Mobile AUSS system for legacy aircraft inspection. The company is also part of a multiple-award $485 million IDV under the KC-46 Support Equipment master IDIQ with the Air Force Lifecycle Management Center, supporting the KC-46A Tanker Modernization program. Additionally, NDT Solutions has a $513,412 Blanket Purchase Agreement with the Oklahoma City Air Logistics Complex for eddy current probes, and a $3.1 million single-award IDC with the Naval Air Warfare Center for MAUS V system maintenance and refurbishment. These IDVs demonstrate the company's broad capabilities in providing non-destructive testing equipment and services across multiple defense agencies and programs, supporting critical maintenance, inspection, and modernization efforts for military aircraft and equipment.
RJ5EHVBNB355 334519
Not listed US-10, Wisconsin, USA
7/16/01 12/17/25