Architect and Engineering Services Mechanical and Electrical
Added: Mar 14, 2011 5:24 pm
DESCRIPTION: ARCHITECT AND ENGINEER (A-E) SERVICES FOR INDEFINITE DELIVERY TYPE CONTRACTS FOR DESIGN OF CONSTRUCTION PROJECTS, GENERAL AND ENVIRONMENTAL STUDIES, SUPPORTING SERVICES, AND TITLE II INSPECTION SERVICES AT ELLSWORTH AFB, SD. This requirement is being procured in accordance with the Brooks Act (Public Law 92-582) as implemented in the Federal Acquisition Regulation (FAR) Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This procurement is a TOTAL SMALL BUSINESS SET ASIDE for firms classified as Small Businesses under NAICS Code 541310, Architect and Engineering Services. To be classified as a small business, a firm's average annual receipts or sales for the preceding three fiscal years must not exceed $4.5 million for NAICS 541310. The Small Business prime contractor, which must be an architecture or engineering firm, must perform fifty percent (50%) of the work in-house. The firm's capability statement shall demonstrate the qualification necessary to meet the 50% in-house requirement. Additionally, the selected firm must perform the primary Architectural and Engineering mechanical-electrical discipline, and may employ qualified consultants to perform other disciplines. Before a small business is proposed as a potential contractor, they must be certified by the U.S. Small Business Administration and registered in the Central Contractor Registration (CCR) database, accessed at http://www.ccr.gov. Information on registration and annual confirmation requirements may be obtained by contacting the Federal Service Desk for CCR at 1-866-606-8220. Failure to register may render the A-E Firm ineligible for award. No State level certifications shall be accepted. A-E's with engineering categories of mechanical and electrical will be considered. A professional Architect and/or Engineer in the appropriate discipline, licensed in the State of South Dakota, shall stamp all contract drawings. Title I Design services may be required for programming, comprehensive planning, area development, design of new facilities; or the renovation, repair, and maintenance of residential, commercial, and industrial facilities; including roads/bridges, infrastructure, utilities, erosion control, and environmental restoration. Design services may include preliminary conceptual sketches; presentation drawings; final construction drawings (in bond and mylar), AutoCAD drawings; specifications written in the Construction Specification Institute (CSI) format; economic analysis; construction cost and time estimates; engineering calculations; logs and study reports. Projects may include various combinations of architectural, interior design, landscape architecture, structural, civil, geotechnical, mechanical, electrical, environmental and other engineering and technical disciplines. Investigative services may include studies, reports, design analyses, constructability and peer reviews, surveys, and cost estimates. Title II Services may be required for the supervision and inspection of construction projects. The selected A-E's will need to become familiar with Ellsworth AFB's facility design, anti-terrorism, and CAD Standards as well as other Government codes that may be required for selective completed projects.CONTRACT INFORMATION: Open-end A-E contracts will be issued for a one-year period (basic year) and with four, one-year option periods exercised at the discretion of the Government. A maximum of two A-E Open-End contracts may be awarded based on amount and type (primary discipline) of projected workload and availability of funds under NAICS code 541310. The total fees for the basic year and all option years shall not exceed $5,000,000. Each proposed contract will consist of negotiated fixed priced delivery orders with a guaranteed overall minimum of $1,000 over the life of the contract, and a maximum contract capacity of $5,000,000.SELECTION CRITERIA: Evaluation factors include the following:a. Specialized experience and technical competence.b. Professional qualifications.c. Past performance with respect to execution of DoD and other contracts.d. Professional capacity for timely accomplishment of the work.e. Volume of work previously awarded by this office and DoD.f. Location of firm in the general geographical area of EAFB.Evaluation factors "a" through "c" are the most critical. Least important are evaluation factors "e" and "f".SUBMITTAL REQUIREMENT: Firms desiring consideration shall submit an original Standard Form (SF) 330, Architect-Engineer Qualifications package (6/2004 version), Parts I and II, along with one electronic copy on CD. Text for each applicant is limited to 50 pages each, exclusive of indexing tabs, project photos or drawings with brief captions. Front and backside use of a single page will count as 2 pages. Minimum font size is 11 point. Submit credentials for both the Primary Firm and for Key Consultants of all the information pertinent to the selection criteria NLT 5:00 p.m. Mountain Standard Time, 12 Apr 11 to David L. Mendelsohn/David M. Goff, 1000 Ellsworth Street, Suite 1200, Ellsworth AFB SD 57706-4904. Facsimile transmission will not be accepted and will be considered non-responsive.
FA4690-MECH-ELEC Department of the Air Force Air Combat Command
3/14/11, 5:24 PM Architech and Engineering Services - Mechanical and Electrical
Added: Jul 10, 2013 5:00 pm
AWARD NOTICE: DESCRIPTION: ARCHITECT AND ENGINEER (A-E) SERVICES FOR INDEFINITE DELIVERY TYPE CONTRACTS FOR DESIGN OF CONSTRUCTION PROJECTS, GENERAL AND ENVIRONMENTAL STUDIES, SUPPORTING SERVICES, AND TITLE II INSPECTION SERVICES AT ELLSWORTH AFB, SD. This requirement is being procured in accordance with the Brooks Act (Public Law 92-582) as implemented in the Federal Acquisition Regulation (FAR) Subpart 36.6. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. This procurement is a TOTAL SMALL BUSINESS SET ASIDE for firms classified as Small Businesses under NAICS Code 541310, Architect and Engineering Services. To be classified as a small business, a firm's average annual receipts or sales for the preceding three fiscal years must not exceed $4.5 million for NAICS 541310. The Small Business prime contractor, which must be an architecture or engineering firm, must perform fifty percent (50%) of the work in-house. The firm's capability statement shall demonstrate the qualification necessary to meet the 50% in-house requirement. Additionally, the selected firm must perform the primary Architectural and Engineering mechanical-electrical discipline, and may employ qualified consultants to perform other disciplines. Before a small business is proposed as a potential contractor, they must be certified by the U.S. Small Business Administration and registered in the Central Contractor Registration (CCR) database, accessed at http://www.ccr.gov. Information on registration and annual confirmation requirements may be obtained by contacting the Federal Service Desk for CCR at 1-866-606-8220. Failure to register may render the A-E Firm ineligible for award. No State level certifications shall be accepted. A-E's with engineering categories of mechanical and electrical will be considered. A professional Architect and/or Engineer in the appropriate discipline, licensed in the State of South Dakota, shall stamp all contract drawings. Title I Design services may be required for programming, comprehensive planning, area development, design of new facilities; or the renovation, repair, and maintenance of residential, commercial, and industrial facilities; including roads/bridges, infrastructure, utilities, erosion control, and environmental restoration. Design services may include preliminary conceptual sketches; presentation drawings; final construction drawings (in bond and mylar), AutoCAD drawings; specifications written in the Construction Specification Institute (CSI) format; economic analysis; construction cost and time estimates; engineering calculations; logs and study reports. Projects may include various combinations of architectural, interior design, landscape architecture, structural, civil, geotechnical, mechanical, electrical, environmental and other engineering and technical disciplines. Investigative services may include studies, reports, design analyses, constructability and peer reviews, surveys, and cost estimates. Title II Services may be required for the supervision and inspection of construction projects. The selected A-E's will need to become familiar with Ellsworth AFB's facility design, anti-terrorism, and CAD Standards as well as other Government codes that may be required for selective completed projects.CONTRACT INFORMATION: Open-end A-E contracts will be issued for a one-year period (basic year) and with four, one-year option periods exercised at the discretion of the Government. A maximum of two A-E Open-End contracts may be awarded based on amount and type (primary discipline) of projected workload and availability of funds under NAICS code 541310. The total fees for the basic year and all option years shall not exceed $5,000,000. Each proposed contract will consist of negotiated fixed priced delivery orders with a guaranteed overall minimum of $2,000 over the life of the contract, and a maximum contract capacity of $5,000,000.
FA4690-MECH-ELEC Department of the Air Force Air Combat Command
7/10/13, 5:00 PM