Medical Architectural & Engineering Services
Added: May 06, 2015 11:26 am This is a SOURCES SOUGHT notice. The Government is seeking to identify qualified sources under North American Industry Classification System (NAICS) 541330 (Engineering Services). This sources sought notice is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) AND IS NOT A REQUEST FOR A STANDARD FORM 330 nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice.The U.S. Army Engineering and Support Center, Huntsville is seeking capability statements from firms interested in proposing on an Indefinite Delivery type service contract for Architect-Engineer (A-E) design and engineering support services in support of the Medical Division. Any contracts awarded are being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6 and Engineering Pamphlet (EP) 715-1-7. The Medical Division programs provides quick response to repair/renewal situations relating to the architectural, mechanical, electrical, civil, structural, instrumentation, communications, security, safety, systems, and cost, as well as environmental and hazardous materials abatement areas of Government medical and other facilities. The U.S. Army Engineering and Support Center, Huntsville anticipates award of up to six A-E indefinite delivery contracts (IDCs). The Government reserves the right to award more, less, or none at all. The Government anticipates multiple year contracts with an ordering period of one twelve-month base period and four twelve-month option periods. The total estimated programmatic value of this acquisition is $225M.The U.S. Army Engineering & Support Center, Huntsville intends to solicit and award multiple indefinite delivery contracts for architectural-engineering services for medically-related projects. It is the Government's intent to explore whether this acquisition should be reserved in whole, in part, or not at all for small business set-asides. As a result, the Government is performing market research in order to determine whether a sufficient number of small businesses possess the necessary experience or capability to execute requirements within this acquisition. Respondents need to indicate all small business designations (Small Business, 8(a), certified HUBZone, Woman-Owned, and/or Service-Disabled Veteran-Owned).Interested small business firms who meet the experience or capability requirements identified in this notice are requested to reply to this e-mail with a response to the requirements presented below. If no experience or capabilities are associated with a particular requirement, so indicate. Based upon small business responses received, consideration will be given to determining if the acquisition will be set aside for small business competition.The objective of this contract is to provide technical support and designs for Government medical facility repair/renovations in support of the Department of Defense medical requirements. Specific requirements are expected to include, but will not be limited to medical facilities related services such as the preparation of design criteria, architectural and engineering designs, specifications, evaluations, analyses, studies, economic analyses, consultations, comprehensive planning, program management, value engineering, construction phase services, investigations, surveying, mapping, testing, construction inspection services, preparation of operating and maintenance manuals, equipment and systems commissioning, and other related services for medical facilities, including medical administrative and training facilities. Additional support may include: environmental documentation, permits, special studies, and other environmental activities as required by federal, state and local laws and regulations; feasibility studies, other special studies, investigations, and programmatic support services; and as-builts, construction management, and engineering/design changes during medical construction.Minimum requirements of sources: Potential sources for performance of the support services shall be fully qualified in providing A-E services related to medical facility repair/renovation:1. A Small Business concern shall indicate the capability of simultaneously performing at least six task orders valued greater than $150,000 AND two task orders valued greater than $500,000 in various geographic locations, while staying inside the limitations of subcontracting at FAR 52.219-14 (at least 50 percent of the cost of performance incurred for personnel shall be expended for direct employees of the firm). Indicate which personnel from your firm would perform the majority of work and what type of work would be sub-contracted.2. A Small Business concern shall indicate the capability of performing work in the required geographic locations including, but not limited to, the Contiguous United States (CONUS), Alaska, Hawaii, U.S. Territories and possessions, and in identified overseas locations (OCONUS) (e.g. Japan, Korea, Germany, Kwajalein, Italy, Spain, Thailand, England).3. A Small Business concern shall demonstrate the capability, knowledge, and qualifications to perform design for repair and renovation at Government medical facilities in accordance with all applicable medical technical publications, codes, and specifications. The Government is especially interested in work involving aging facilities that do not have current as-built information and will require field verification.4. A Small Business concern shall demonstrate the capability and qualifications to provide A-E services for medical facilities and related projects involving various issues and requirements. Indicate whether the firm has experience with each of the following:- Safety and Health (OSHA)- The Joint Commission (TJC)- Infection Control- Force Protection- Center for Disease Control and Prevention/National Institute of Health (CDC/NIH), "Biosafety in Microbiological and Biomedical Laboratories (BMBL)- Hazardous Material and Hazardous Waste (to include Medical Waste, Asbestos, Lead Base Paint)- Leadership in Energy and Environmental Design (LEED)- Association for Assessment and Accreditation of Laboratory Animal Care International (AAALAC)5. A Small Business concern shall indicate a satisfactory record of experience and completion of similar medical facility contracts, and will demonstrate sufficient equipment, personnel, organizational, financial, and technical capability to ensure satisfactory completion of the contract. Indicate the number of professional architects and engineers by discipline available in the firm.6. A Small Business concern shall indicate the capability and qualifications to provide Quality Assurance and construction phase services over the medical construction contractor's quality control process using the Corps of Engineer's quality assurance procedures as identified in ER 1180-1-6 (Contracts Construction Quality Management).7. Indicate the number of medical designs or services performed by your firm within the last 6 years in support of a repair/renovation (construction) project with a value of:- Between $250,000 and $500,000. - Between $500,000 and $1,000,000. - Between $1,000,000 and $5,000,000. - Between $5,000,000 and $10,000,000. - Between $10,000,000 and $25,000,000.8. Explain your (or team's/joint venture's) capability and qualifications to provide medical facilities services for related projects including planning; construction project management; staff training and consultation; transition planning; Defense Medical Logistics Standard Support (DMLSS) support in regards to the operations of the service orders and work requests and General Fund Enterprise Business System (GFEBS) support; facility condition assessment; submittal review and contractor RFI (Request for Information) coordination - the process for requesting information from the government.A Small Business concern must provide a brief capability narrative demonstrating the firm's experience and qualifications with similar medical A-E services as indicated above, as well as the prime contractor's name, DUNS number, size/status (8a, SDVOSB, HUBZone, etc.), address, point of contact phone number and email address. Submit responses via email to john.c.kirkwood@usace.army.mil. The email subject line shall be "Medical Division A-E Capability Narrative". Submission should be received by 21 MAY 2015, 2pm Central Time and should not exceed tee one-sided, 8 1/2" X 11" pages.NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED. Cover letters and extraneous materials (brochures, SF330, etc) will not be considered. Questions concerning submissions should be directed to John Kirkwood, Contract Specialist at 256-895-1793 (john.c.kirkwood@usace.army.mil) or Cisti Edwards, Contracting Officer at 256-895-1468 (cisti.edwards@usace.army.mil). Personal visits for the purpose of discussing this announcement will not be scheduled. W912DY-16-R-0001 Department of the Army Corps of Engineers Engineering Support Center Huntsville
5/6/15, 11:26 AM Medical A-E
Added: Jul 01, 2016 11:37 am 1.0 CONTRACT INFORMATION1.1 General. This contract is being procured in accordance with the Selection of Architects and Engineers (formerly known as the Brooks A-E Act) as implemented in FAR 36.6 and EP 715-1-7 Architect-Engineer Contracting in USACE. This acquisition will be used to procure highly specialized services required to provide continued Architect-Engineer (A-E) design and technical support services in support of the CEHNC Medical Division Medical Repair and Renewal (MRR) and Project Support Services (PSS) programs. The CEHNC Medical Division provides quick response to repair/renewal situations relating to the architectural, mechanical, electrical, civil, structural, instrumentation, communications, security, safety, systems, cost, engineering services, as well as facility operations, sustainment, renewal, and project coordination. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. The U.S. Army Corps of Engineers' Huntsville Center is one of the Army's leaders in studies as well as execution, and partners with the Corps' project delivery teams, regional business centers/divisions, stakeholders and geographical districts to provide expertise and the highest quality research facility, life cycle support to the Department of Defense (DoD), other Federal agencies and foreign governments. In order to accomplish this objective Huntsville Center proposes to award a Restricted/ Small Business (SB) Multiple Award Task Order Contract (MATOC). The award will be an Indefinite Delivery/Indefinite Quantity (ID/IQ) contract, with a twelve (12) month base ordering period and four (4) 12-month option ordering periods. Firm Fixed Price (FFP) task orders will be negotiated. It is anticipated that this acquisition will result in the award of up to nine (9) indefinite delivery type contracts, with the Government reserving the right to award more, less, or none at all if it is determined to be in the best interest of the Government. The North American Industrial Classification System code is 541330. The total requirements expected to be awarded under the Medical Division MRR and PSS programs on A-E contracts are anticipated to total approximately $225,000,000 over a period of five (5) years. To be eligible for contract award, the submitting A-E firm must be registered in the System for Award Management (SAM) and have the professional qualifications necessary for satisfactory performance of the required services.1.2 In accordance with (IAW) FAR 52.236-23, Responsibility of the Architect-Engineer Firm, the A-E Firm shall be responsible for the professional quality, technical accuracy, and the coordination of all designs, drawings, specifications, and other services furnished by the Firm under this contract. The Firm shall, without additional compensation, correct or revise any errors or deficiencies in its designs, drawings, specifications, and other services. In accordance with DFARS clause 252.236-7009, Option for Supervision and Inspection Services, the Firm may perform any part or all of the supervision and inspection services for the construction contracts resulting from the A-E services, however, the A-E firm will not be responsible for the direct performance of the construction itself. In accordance with FAR 36.209, the A-E firm and its subcontractors, suppliers, and consultants selected for award will not be considered eligible for DoD construction/design-build contracts that relate to any A-E Task Orders awarded under this contract. Potential OCIs are also governed by FAR subpart 9.5.2.0 DESCRIPTION OF WORK2.1 Project Information. The Medical Division MRR and PSS A-E contracts provide all services required to prepare plans, specifications, work plans, technical support and other supporting documents necessary for execution of the MRR/PSS projects issued by task order. As part of the design and technical support effort, the contractor may be required to survey the problem areas, evaluate and recommend solutions. The level of detail and format of the design and technical support packages may vary dependent upon the complexity of the project. In addition to project designs the contractor may be required to conduct studies, investigations, surveying and mapping, tests, evaluations, consultations, comprehensive planning, program management, conceptual designs, value engineering, construction phase services, soils engineering, drawing reviews, preparation of operating and maintenance manuals, preparation of parametric estimates, equipment and systems commissioning and other related services. Firms must have specialized experience and technical competence in medical facility, equipment, and systems design.2.1 Specific A-E design and technical support services include but are not limited to: a) preparation of design criteria, b) architectural and engineering designs, c) specifications, d) evaluations, e) analyses, f) studies, g) economic analyses, h) consultations, i) comprehensive planning, j) program management, k) value engineering, l) construction phase services, m) investigations, n) surveying, o) mapping, p) testing, q) construction inspection services, r) preparation of operating and maintenance manuals, s) equipment and systems commissioning, andt) other related services for medical facilities (including medical administrative and training facilities).2.1.1 Additional support may include environmental documentation, permits, special studies, and other environmental activities as required by federal, state and local laws and regulations; feasibility studies, other special studies, investigations, programmatic support services, as-builts, construction management, and engineering/design changes during medical construction.2.1 Location of Work. The scope may involve work in multiple locations toughout the Continental United States (CONUS), Alaska, Hawaii, U.S. Territories and possessions, with the potential of overseas locations (OCONUS) to be identified as the need arises.SELECTION CRITERIA: The selection criteria for the base IDIQ contract are listed below in descending order of importance (first by primary criterion and then by each sub-criterion). Criteria (a) tough (e) are primary. Criteria (f) is secondary and will only be used as a tie-breaker among firms that are technically equal. Price will not be used as a criterion.3.1. Specialized Corporate Experience and Technical Competence Criteria (a): The A-E Team (including Prime and Key Subcontractors) shall provide examples of projects demonstrating specialized experience and technical competence in the design and technical support for medical facility repairs and renovation. The A-E team shall provide at least tee (3) but no more than five (5) projects that demonstrate recent and relevant specialized experience and technical competency in sub-criteria (a) - (e). Recent experience is experience preparing designs from which facility repair and renovation has been completed within the last tee (3) years from the date of this announcement. Relevant experience is experience similar in size, complexity, and scope of this requirement. Example projects shall clearly state what specific role the firm and/or key subcontractors (i.e. any subcontract which equals 10% or more of the prime contract) had including the names of the key personnel. The A/E team's experience should demonstrate recent and relevant experience in each of the following sub criteria:Sub Criterion (a) - Recent experience of the firm and its consultants (within the last 3 years) in design and technical support of medical facilities, laboratories (research, clinical, dental clinics, operating rooms, medical clinics, and support functions of medical facilities (power, water, and steam)), medical storage facilities, and medical transition spaces. Experience should include adapting standard design packages. The adaptations should demonstrate space conversions (warehouses to clinics for example), working with existing systems in renovating portions of hospitals.Sub Criterion (b) - Design and technical support of medical projects on Army, Navy and Air Force installations or in support of the Defense Health Agency initiatives. Support should demonstrate experience in the rehabilitation of existing medical facilities of various types, sizes, and complexities.Sub Criterion (c) - Specific technical capabilities, such as construction phase services, program and project management, construction inspection services, value engineering, facility condition assessments, programmatic services and other related services for medical facilities, including medical logistics and training facilities.Sub Criterion (d) - Knowledge of specific laws and regulations. The contractor should demonstrate a working knowledge of The Joint Commission (TJC), medical installation standards and local codes and regulations that govern medical facilities.Sub Criterion (e) - Design and technical support quality management approach. Specifically, how will the contractor maintain the quality of the design/technical support and cost control. Describe what system is in place, or will be in place at the time of award, to assure quality is maintained.The A-E firm shall not submit a base contract (IDIQ, MATOC, etc.) or multiple task orders as a project. Individual task orders from an IDIQ contract can be submitted as one project. The Government will consider only the first 5 projects in the submission; any additional projects will not be evaluated. The submitting A-E firm shall submit an unconditional letter of commitment signed by all key subcontractors. (A key subcontractor is a subcontractor that will perform 10% or more of the work for this contract). A Sample Letter of Commitment is attached to this Synopsis.3.2. Professional Qualifications Criteria (b): The submitting A-E firm shall provide a Certificate of Authorization (or equivalent) to demonstrate that it is permitted by law to practice the professions of architecture and/or engineering work in at least one state, territory, or jurisdiction of the United States as required by FAR 36.601-4(b). Identify the professional qualifications and credentials of key personnel in the disciplines shown below that will be necessary for satisfactory performance of the required services. The Government will consider the qualifications, education, overall and relevant experience, and training of licensed, registered, and/or certified key personnel and longevity with the firm of the key management and technical personnel. Resumes (as well as letters of commitment from key personnel who are not currently employed by the prime, subcontractor or JV at the time of submission) shall be provided in SF-330, Section E for all key personnel in the following disciplines: architect, structural engineer, mechanical engineer, electrical engineer, communications engineer, fire protection engineer, hazardous materials specialist, industrial hygienist, safety engineer, interior designer, cost engineer, and project manager. Also provide the resume for a LEED Accredited Professional (AP), which can be one of the personnel listed above. These key personnel (for the disciplines listed above) must currently be registered in their profession in at least one state. The SF330 submission shall clearly identify the lead in each of these disciplines, the type of registration, and in what state(s) they are registered. If a submitted key discipline personnel works for a subcontractor to the primary firm then they must show how long they have worked as a subcontractor with the primary firm and what part they played in project(s) submitted under 3.1 Specialized Corporate Experience and Technical Competence Criteria.3.3. Past Performance Criteria (c): Past performance of the prime firm and any key subcontractor(s) shall be provided on all projects submitted under 3.1, Specialized Corporate Experience and Technical Competence Criteria. The submitting A-E firm shall provide a reference using the Past Performance Questionnaire (PPQ) (attached to this Synopsis) and/or a final ACASS report. The submitting A-E firm is responsible for forwarding the PPQ to each past performance reference submitted under this synopsis. The submitting A-E firm should complete Blocks 1-4 of the PPQ and the client/customer completes Blocks 5-8 and the evaluation survey. The client/customer should return the PPQ to the firm to be submitted with the SF330 or send, via email, the PPQ directly to the Government point of contact identified in this Synopsis. ACASS and/or PPIRS may be queried for all prime, JV, and key subcontractors. In addition to the above, the Government may review any other sources of information for evaluating past performance. In the event that adverse past performance information is obtained outside the PPIRS/ACASS query and the A-E firm did not have the opportunity to respond, the A-E firm will be given the opportunity to comment if the firm is in the slate of firms selected for discussions IAW FAR 36.602-3(c) or if adverse past performance is the determining reason why the firm is not in the slate of the most highly qualified firms.3.4. Capacity Criteria (d): Demonstrate capacity or firm's ability to make available an adequate number of interdisciplinary teams to accomplish at least five (5) task orders simultaneously. Projects typically range in value from $100,000 to $1,000,000 each, but may vary as requirements dictate. Firms should demonstrate their capability to perform work in multiple geographic locations. Greater consideration will be given to the A-E firms with the capability to perform work in diverse locations rather than only having experience in one geographic area and with firms performing the type of work addressed in paragraph 3.1.3.5. Knowledge of the Locality Criteria (e). Demonstrate capability to perform work toughout the contiguous United States (CONUS), as well as outside the contiguous United States (OCONUS). Greater consideration will be given to the A-E firms with the capability to perform work in diverse locations rather than only having experience in one geographic area.SECONDARY SELECTION CRITERIA3.6. Volume of work Criteria (f): Volume of work awarded by DoD during the previous 12 months, with the objective of effecting an equitable distribution of DoD A-E contracts among qualified firms4.0 SUBMISSION REQUIREMENTS The submitting A-E firm must be registered in the System for Award Management (SAM) to be eligible for award. The submitting A-E firm may register via the SAM internet site at http://www.sam.gov. SF-330 submissions will be received until 1400 (2:00 pm) Central Time on 1 August 2016. Interested firms having the capabilities to perform the work described above must submit five (5) hard copies and one (1) PDF copy on a compact disk (CD) of the SF 330 Part I and SF 330 Part II for the prime firm and subcontractors or Joint Venture (JV) Partners to the Contract Specialist at the following address:US Army Engineering and Support CenterCEHNC-CT-PREAWARDATTN: Ms. Jill G. Freeman4820 University SquareHuntsville AL 35816-1822All hard copy submissions shall be identical in content. The SF 330 Part I shall not exceed sixty (60) pages (8.5" x 11"), including no more than eight (8) pages for Section H. Each side of a sheet of paper is considered one page. Use no smaller than 12 font type. However, firms may use no smaller than 10 pt font on organizational charts, graphs, tables and matrices. Charts, graphs etc. may have only that amount of text to explain the item and shall not contain excessive text that circumvents the page and font limits. Pages that violate these limits will be removed from the packet and will not be evaluated. Cover letters, table of Contents, letters of Commitments, the Certificate of Authorization, PPQs and/or final ACASS reports will not be counted in the 60 page limit. Include the firm's DUNS number in the SF 330, Part I, and Section H. In Section H, indicate the estimated percentage of involvement of each firm (prime, key-subcontractors, and other subcontractors) on the proposed team. Facsimile transmissions will not be accepted. Solicitation packages are not provided and no additional project information will be given to firms during the announcement period. Any JV Partnership must submit a signed and dated joint venture agreement as a part of the package. This paperwork will not be included in the page count and should be provided as an attachment. This is not a request for proposal. Awards are anticipated to be made in the spring of 2017 or later.Point of Contact (POC)Jill G. Freeman, 256-895-1789Jill.G.Freeman@usace.army.milRaven A. NallContracting Officer, 256-895-1319Raven.A.Nall@usace.army .milPotential Firms are to post questions at www.projnet.org using bidder inquiry key 7D7NVF-A3J3NV. The deadline for posting questions is 1400 (2:00 pm) Central Time on 11 July 2016. W912DY-16-R-0001 Department of the Army Corps of Engineers Engineering Support Center Huntsville
7/1/16, 11:37 AM Medical Architectural & Engineering Services
Added: Mar 25, 2018 11:02 am This is a SOURCES SOUGHT notice. The Government is seeking to identify qualified sources under North American Industry Classification System (NAICS) 541330 (Engineering Services). This sources sought notice is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) AND IS NOT A REQUEST FOR A STANDARD FORM 330 nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice. The U.S. Army Engineering and Support Center, Huntsville is seeking capability statements from firms interested in proposing on an Indefinite Delivery type service contract for Architect-Engineer (A-E) design and engineering support services in support of the Medical Division. Any contracts awarded are being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6 and Engineering Pamphlet (EP) 715-1-7. The Medical Division programs provides quick response to repair/renewal situations relating to the architectural, mechanical, electrical, civil, structural,instrumentation, communications, security, safety, systems, and cost, as well as environmental and hazardous materials abatement areas of Government medical and other facilities. The U.S. Army Engineering and Support Center, Huntsville anticipates award of up to six A-E indefinite delivery contracts(IDCs). The Government reserves the right to award more, less, or none at all. The Government anticipates multiple year contracts with an ordering period of one twelve-month base period and four twelve-month option periods. The total estimated programmatic value of this acquisition is $225M.The U.S. Army Engineering & Support Center, Huntsville intends to solicit and award multiple indefinite deliverycontracts for architectural-engineering services for medically-related projects. It is the Government's intent to explore whether this acquisition should be reserved in whole, in part, or not at all for small business set-asides. As a result, the Government is performing market research in order to determine whether a sufficient number of small businesses possess the necessary experience or capability to execute requirements within this acquisition. Respondents need to indicate all small business designations (Small Business, 8(a), certified HUBZone, Woman-Owned, and/or Service-Disabled Veteran-Owned).Interested small business firms who meet the experience or capability requirements identified in this notice arerequested to reply to this e-mail with a response to the requirements presented below. If no experience orcapabilities are associated with a particular requirement, so indicate. Based upon small business responsesreceived, consideration will be given to determining if the acquisition will be set aside for small businesscompetition.The objective of this contract is to provide technical support and designs for Government medical facilityrepair/renovations in support of the Department of Defense medical requirements. Specific requirements areexpected to include, but will not be limited to medical facilities related services such as the preparation of design criteria, architectural and engineering designs, specifications, evaluations, analyses, studies, economic analyses,consultations, comprehensive planning, program management, value engineering, construction phase services,investigations, surveying, mapping, testing, construction inspection services, preparation of operating and maintenance manuals, equipment and systems commissioning, and other related services for medical facilities,including medical administrative and training facilities. Additional support may include: environmentaldocumentation, permits, special studies, and other environmental activities as required by federal, state and local laws and regulations; feasibility studies, other special studies, investigations, and programmatic support services; and as-builts, construction management, and engineering/design changes during medical construction.Minimum requirements of sources: Potential sources for performance of the support services shall be fullyqualified in providing A-E services related to medical facility repair/renovation:1. A Small Business concern shall indicate the capability of simultaneously performing at least six task ordersvalued greater than $150,000 AND two task orders valued greater than $500,000 in various geographic locations,while staying inside the limitations of subcontracting at FAR 52.219-14 (at least 50 percent of the cost ofperformance incurred for personnel shall be expended for direct employees of the firm). Indicate which personnelfrom your firm would perform the majority of work and what type of work would be sub-contracted.2. A Small Business concern shall indicate the capability of performing work in the required geographic locationsincluding, but not limited to, the Contiguous United States (CONUS), Alaska, Hawaii, U.S. Territories andpossessions, and in identified overseas locations (OCONUS) (e.g. Japan, Korea, Germany, Kwajalein, Italy, Spain, Thailand, England).3. A Small Business concern shall demonstrate the capability, knowledge, and qualifications to perform design for repair and renovation at Government medical facilities in accordance with all applicable medical technical publications, codes, and specifications. The Government is especially interested in work involving aging facilities that do not have current as-built information and will require field verification.4. A Small Business concern shall demonstrate the capability and qualifications to provide A-E services formedical facilities and related projects involving various issues and requirements. Indicate whether the firm hasexperience with each of the following:- Safety and Health (OSHA)- The Joint Commission (TJC)- Infection Control- Force Protection- Center for Disease Control and Prevention/National Institute of Health (CDC/NIH), "Biosafety in Microbiological and Biomedical Laboratories (BMBL)- Hazardous Material and Hazardous Waste (to include Medical Waste, Asbestos, Lead Base Paint)- Leadership in Energy and Environmental Design (LEED)- Association for Assessment and Accreditation of Laboratory Animal Care International (AAALAC)5. A Small Business concern shall indicate a satisfactory record of experience and completion of similar medicalfacility contracts, and will demonstrate sufficient equipment, personnel, organizational, financial, and technical capability to ensure satisfactory completion of the contract. Indicate the number of professional architects and engineers by discipline available in the firm.6. A Small Business concern shall indicate the capability and qualifications to provide Quality Assurance andconstruction phase services over the medical construction contractor's quality control process using the Corps ofEngineer's quality assurance procedures as identified in ER 1180-1-6 (Contracts Construction Quality Management).7. Indicate the number of medical designs or services performed by your firm within the last 6 years in support of a repair/renovation (construction) project with a value of:- Between $250,000 and $500,000.- Between $500,000 and $1,000,000.- Between $1,000,000 and $5,000,000.- Between $5,000,000 and $10,000,000.- Between $10,000,000 and $25,000,000.8. Explain your (or team's/joint venture's) capability and qualifications to provide medical facilities services forrelated projects including planning; construction project management; staff training and consultation; transitionplanning; Defense Medical Logistics Standard Support (DMLSS) support in regards to the operations of the service orders and work requests and General Fund Enterprise Business System (GFEBS) support; facilitycondition assessment; submittal review and contractor RFI (Request for Information) coordination - the process forrequesting information from the government.A Small Business concern must provide a brief capability narrative demonstrating the firm's experience andqualifications with similar medical A-E services as indicated above, as well as the prime contractor's name, DUNS number, size/status (8a, SDVOSB, HUBZone, etc.), address, point of contact phone number and email address.Submit responses via email to john.c.kirkwood@usace.army.mil. The email subject line shall be "Medical Division A-E Capability Narrative". Submission should be received by 5 June 2015, 2pm Central Time and should not exceed tee one-sided, 8 1/2" X 11" pages.NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED. Cover letters and extraneous materials (brochures, SF330, etc) will not be considered. Questions concerning submissions should be directed to John Kirkwood, Contract Specialist at 256-895-1793(john.c.kirkwood@usace.army.mil) or Cisti Edwards, Contracting Officer at 256-895-1468 (cisti.edwards@usace.army.mil). Personal visits for the purpose of discussing this announcement will not be scheduled. W912DY-16-R-0001 Department of the Army Corps of Engineers Engineering Support Center Huntsville
3/25/18, 11:02 AM Medical Architectural & Engineering Services
Added: Mar 25, 2018 11:07 am This is a SOURCES SOUGHT notice. The Government is seeking to identify qualified sources under North American Industry Classification System (NAICS) 541330 (Engineering Services). This sources sought notice is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) AND IS NOT A REQUEST FOR A STANDARD FORM 330 nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice. The U.S. Army Engineering and Support Center, Huntsville is seeking capability statements from firms interested in proposing on an Indefinite Delivery type service contract for Architect-Engineer (A-E) design and engineering support services in support of the Medical Division. Any contracts awarded are being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6 and Engineering Pamphlet (EP) 715-1-7. The Medical Division programs provides quick response to repair/renewal situations relating to the architectural, mechanical, electrical, civil, structural,instrumentation, communications, security, safety, systems, and cost, as well as environmental and hazardous materials abatement areas of Government medical and other facilities. The U.S. Army Engineering and Support Center, Huntsville anticipates award of up to six A-E indefinite delivery contracts(IDCs). The Government reserves the right to award more, less, or none at all. The Government anticipates multiple year contracts with an ordering period of one twelve-month base period and four twelve-month option periods. The total estimated programmatic value of this acquisition is $225M.The U.S. Army Engineering & Support Center, Huntsville intends to solicit and award multiple indefinite deliverycontracts for architectural-engineering services for medically-related projects. It is the Government's intent to explore whether this acquisition should be reserved in whole, in part, or not at all for small business set-asides. As a result, the Government is performing market research in order to determine whether a sufficient number of small businesses possess the necessary experience or capability to execute requirements within this acquisition. Respondents need to indicate all small business designations (Small Business, 8(a), certified HUBZone, Woman-Owned, and/or Service-Disabled Veteran-Owned).Interested small business firms who meet the experience or capability requirements identified in this notice arerequested to reply to this e-mail with a response to the requirements presented below. If no experience orcapabilities are associated with a particular requirement, so indicate. Based upon small business responsesreceived, consideration will be given to determining if the acquisition will be set aside for small businesscompetition.The objective of this contract is to provide technical support and designs for Government medical facilityrepair/renovations in support of the Department of Defense medical requirements. Specific requirements areexpected to include, but will not be limited to medical facilities related services such as the preparation of design criteria, architectural and engineering designs, specifications, evaluations, analyses, studies, economic analyses,consultations, comprehensive planning, program management, value engineering, construction phase services,investigations, surveying, mapping, testing, construction inspection services, preparation of operating and maintenance manuals, equipment and systems commissioning, and other related services for medical facilities,including medical administrative and training facilities. Additional support may include: environmentaldocumentation, permits, special studies, and other environmental activities as required by federal, state and local laws and regulations; feasibility studies, other special studies, investigations, and programmatic support services; and as-builts, construction management, and engineering/design changes during medical construction.Minimum requirements of sources: Potential sources for performance of the support services shall be fullyqualified in providing A-E services related to medical facility repair/renovation:1. A Small Business concern shall indicate the capability of simultaneously performing at least six task ordersvalued greater than $150,000 AND two task orders valued greater than $500,000 in various geographic locations,while staying inside the limitations of subcontracting at FAR 52.219-14 (at least 50 percent of the cost ofperformance incurred for personnel shall be expended for direct employees of the firm). Indicate which personnelfrom your firm would perform the majority of work and what type of work would be sub-contracted.2. A Small Business concern shall indicate the capability of performing work in the required geographic locationsincluding, but not limited to, the Contiguous United States (CONUS), Alaska, Hawaii, U.S. Territories andpossessions, and in identified overseas locations (OCONUS) (e.g. Japan, Korea, Germany, Kwajalein, Italy, Spain, Thailand, England).3. A Small Business concern shall demonstrate the capability, knowledge, and qualifications to perform design for repair and renovation at Government medical facilities in accordance with all applicable medical technical publications, codes, and specifications. The Government is especially interested in work involving aging facilities that do not have current as-built information and will require field verification.4. A Small Business concern shall demonstrate the capability and qualifications to provide A-E services formedical facilities and related projects involving various issues and requirements. Indicate whether the firm hasexperience with each of the following:- Safety and Health (OSHA)- The Joint Commission (TJC)- Infection Control- Force Protection- Center for Disease Control and Prevention/National Institute of Health (CDC/NIH), "Biosafety in Microbiological and Biomedical Laboratories (BMBL)- Hazardous Material and Hazardous Waste (to include Medical Waste, Asbestos, Lead Base Paint)- Leadership in Energy and Environmental Design (LEED)- Association for Assessment and Accreditation of Laboratory Animal Care International (AAALAC)5. A Small Business concern shall indicate a satisfactory record of experience and completion of similar medicalfacility contracts, and will demonstrate sufficient equipment, personnel, organizational, financial, and technical capability to ensure satisfactory completion of the contract. Indicate the number of professional architects and engineers by discipline available in the firm.6. A Small Business concern shall indicate the capability and qualifications to provide Quality Assurance andconstruction phase services over the medical construction contractor's quality control process using the Corps ofEngineer's quality assurance procedures as identified in ER 1180-1-6 (Contracts Construction Quality Management).7. Indicate the number of medical designs or services performed by your firm within the last 6 years in support of a repair/renovation (construction) project with a value of:- Between $250,000 and $500,000.- Between $500,000 and $1,000,000.- Between $1,000,000 and $5,000,000.- Between $5,000,000 and $10,000,000.- Between $10,000,000 and $25,000,000.8. Explain your (or team's/joint venture's) capability and qualifications to provide medical facilities services forrelated projects including planning; construction project management; staff training and consultation; transitionplanning; Defense Medical Logistics Standard Support (DMLSS) support in regards to the operations of the service orders and work requests and General Fund Enterprise Business System (GFEBS) support; facilitycondition assessment; submittal review and contractor RFI (Request for Information) coordination - the process forrequesting information from the government.A Small Business concern must provide a brief capability narrative demonstrating the firm's experience andqualifications with similar medical A-E services as indicated above, as well as the prime contractor's name, DUNS number, size/status (8a, SDVOSB, HUBZone, etc.), address, point of contact phone number and email address.Submit responses via email to john.c.kirkwood@usace.army.mil. The email subject line shall be "Medical Division A-E Capability Narrative". Submission should be received by 5 June 2015, 2pm Central Time and should not exceed tee one-sided, 8 1/2" X 11" pages.NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED. Cover letters and extraneous materials (brochures, SF330, etc) will not be considered. Questions concerning submissions should be directed to John Kirkwood, Contract Specialist at 256-895-1793(john.c.kirkwood@usace.army.mil) or Cisti Edwards, Contracting Officer at 256-895-1468 (cisti.edwards@usace.army.mil). Personal visits for the purpose of discussing this announcement will not be scheduled. W912DY-16-R-0001 Department of the Army Corps of Engineers Engineering Support Center Huntsville
3/25/18, 11:07 AM