Utility Monitoring and Control Systems (UMCS) Services
Added: Jan 07, 2014 5:53 pm Pre-Solicitation Synopsis Utility Monitoring and Control System (UMCS) W912DY-12-R-0015 NAICS 541512 - Computer System Design Services The U.S. Army Engineering and Support Center, Huntsville (CEHNC) will be soliciting proposals on an unrestricted basis for the Utility Monitoring and Control Systems (UMCS), under solicitation W912DY-12-R-0015, with a portion of the awards set aside for small businesses. For this acquisition, CEHNC proposes to award Multiple Award Task Order Contract (MATOC)/ Indefinite Delivery/Indefinite Quantity (ID/IQ) contracts. This is NOT a Request for Proposal (RFP). It is anticipated that a RFP will be issued approximately 15 days after the release of this announcement. A pre-proposal conference is being planned for one day during the week of 27 - 31 January 2014. Conference details will be posted with the RFP release, which is currently projected to be 21 January 2014. CEHNC is seeking contractors to provide services for the procurement and installation of UMCS, Heating, Ventilating, and Air Conditioning (HVAC) Systems (to include chillers, boilers, air handling units and ductwork systems installation and/or integration), Supervisory Control and Data Acquisition (SCADA) systems, Fire Alarm Systems (FAS), life safety control systems, chemical / biological / radiological contaminant detection / filtration, utilities (electric/gas/water) metering and Electronic Security Systems (ESS) worldwide. UMCS contractors are to provide a comprehensive and a holistic range of services with the following benefits: Provide high-quality equipment, timely services, and professional project management for UMCS Perform infrastructure improvements to enhance mission support Create healthier, safer working and living environments Apply practical contract and procurement processes to ensure project implementation Provide expert, objective technical support including: project facilitators, and advanced technology experts Facilitate smart project management that ensures building efficiency improvements with the new equipment Implement large and small facility improvements that provide immediate savings Ensure energy and related operation and maintenance cost savings Assure maintenance and repair when included as part of contract Enhance the ability to plan and budget energy, operation, and maintenance activities at the facility level Curtail the budget impact of rising or volatile energy prices UMCS encompasses a wide array of energy management and building automation systems, which employ hardware and software to affect energy, manpower, equipment and management savings. Energy savings is accomplished tough monitoring and providing control and/or control overrides for heating, ventilation, and air conditioning (HVAC) systems as well as for lighting and central plant equipment. Manpower savings are accomplished by remotely monitoring and controlling equipment, meters, or systems which would otherwise require periodic visual observation. Equipment savings is accomplished by early detection of equipment failure or reductions in equipment performance levels. The UMCS may also be used to assist in building and maintenance management. Management savings are achieved tough quote mark Supervisory Control and Data Acquisition quote mark or quote mark SCADA quote mark which refers to centralized systems that monitor and control electrical distribution systems and other utilities for entire sites, or complexes of systems spread out over large areas. These savings are delivered tough contracts with private contractors that specialize in procurement and installation of UMCS. UMCS services will be provided toughout the Continental United States (CONUS), to include the District of Columbia and outside the Continental United States (OCONUS) including Alaska, Hawaii, Guam, Puerto Rico, American Samoa, U.S. Territories and possessions, locations with named contingency operations, Belgium, Netherlands, Germany, Italy, Japan & Okinawa, Malaysia, Qatar, Kuwait, Saipan, South Korea and Turkey. Small business offerors are not required to have OCONUS experience. The UMCS IV MATOC ID/IQ contract will have an ordering period of five years (tee (3) year base period and two (2) option periods of one (1) year each) with an estimated total value of $2.5 billion. An unrestricted suite of contracts, with $500 million of the awards set aside for small business concerns, is planned as a result of the market research. The government reserves the right to increase the set aside teshold above $500 million. Detailed ordering procedures will be included in the solicitation to specify the circumstances for reserving a task order for small businesses. The intent is to award contracts to the most highly qualified and responsible offerors, both large and small businesses, that offer the Best Value to the Government. This contract will be for predominantly for services but will have construction and supply elements. The subsequent contracts will each include the necessary clauses, terms, conditions, instructions, and references attendant to each of these tee unique contract styles. Based upon the requirements for each task order, these MATOCs will thus include the flexibility to adapt to the form required by tailoring the mix of clauses (construction, service or supply) to mitigate risk. The contract structure will offer the flexibility to meet the various demands without sacrificing the rigor necessary to satisfy fiscal and legislative mandates, all while delivering the best business deal. For this acquisition, Firm Fixed-Price (FFP) is the primary contract type for 95% of projects with Cost Reimbursement (CR) and Time & Materials (T&M) task orders being employed for the remaining 5% of requirements. The goal is to use FFP task orders for the majority of projects; however, on occasion, it may not be possible to estimate, with any reasonable degree of confidence, the costs associated with a task (project). Each project has its own unique requirements. Some project sites have existing security and/or utility controls systems that require evaluation and/or upgrade, while other sites may have no systems at all. For projects with more challenging scenarios, a Cost Reimbursement or Time and Materials task order may be used to perform the type requirements. Under each contract, task orders may be awarded as Firm Fixed-Price, Time & Materials, Cost Reimbursement or some combination of the aforementioned contract types. Most task orders will be subject to the Services Contract Act (SCA). Task orders that include some construction efforts may also be subject to the Davis Bacon Act (DBA). The RFP will be available electronically at https://www.fbo.gov. The POC for this acquisition is undersigned. Martin Bushey Contracting Specialist, Huntsville Center Directorate of Contracting Voice: (256) 895-1119 FAX: (256) 895-1197 Email: martin.bushey@usace.army.mil
W912DY12R0015 Department of the Army Corps of Engineers Engineering Support Center Huntsville
1/7/14, 5:53 PM RFI for ON-RAMP onto the UMCS IV Contract Vehicle
Added: Jan 17, 2017 11:17 am Request For Information (RFI)Utility Monitoring and Control System (UMCS) IV Multiple Award Task Order Contract (MATOC) administered at the U.S. Army Corps of Engineers, Engineering and Support Center in Huntsville, AL.This is a Request for Information (RFI) notice. The Government is seeking to update market research for solicitation W912DY-12-R-0015 with the intent of on-ramping qualified contractors into the current suite of contracts; issued using North American Industry Classification System (NAICS) 541512 (Computer Systems Design Services). The small business size standard is $27.5 Million. This RFI is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice.1. Contract Information The U.S. Army Corps of Engineers, Engineering and Support Center, Huntsville is seeking capability statements from companies who possess the interest and capability to ON-RAMP onto the UMCS IV MATOC and to execute the requirements outlined below:The objective of this requirement is to provide all personnel, equipment, tools, materials, supervision, and nonpersonal services necessary to perform the procurement and installation of Utility Monitoring and Control Systems (UMCS) and similar services such as Heating, Ventilating, and Air Conditioning (HVAC) Systems to include chiller/boiler systems installation and/or integration; Building Automation Systems (BAS); Supervisory Control and Data Acquisition (SCADA) Systems, and other Automated Control Systems including Fire Alarm Safety (FAS) systems, chemical / biological / radiological contaminant detection / filtration / response, utilities (electric/gas/water/steam) metering; Electronic Security Systems (ESS); and security and/or force protection measures such as, but not limited to, barriers, fencing, gates, window treatments, hardening, and lighting worldwide. These services include those actions required to preserve and maintain the systems in such a condition that they may be effectively used for their designated functional purpose.The current UMCS IV MATOC contract expires in August of 2019 and has a remaining capacity of an estimated $1.96 Billion.2. Submission Requirements This RFI announcement is unrestricted to allow small and large businesses to respond. The Government is seeking to identify qualified sources either singularly or as part of an assembled team. Interested companies should submit a document describing relevant demonstrated experience and qualifications via email to Erika.D.White @usace.army.mil no later than 17 February 2017 in the following format: Submissions should not exceed ten - 8.5 inches x 11 inches pages (five pages if printed two-sided). The submission should address all questions in the questionnaire below and your ability to perform the work, obtain the necessary financing, etc., as stated in the contract information section of this RFI. No hard copy of facsimile submissions will be accepted. Cover letters and extraneous materials (brochures, etc.) will not be considered.Questions concerning submissions should be directed to Mrs. Erika White, Contract Specialist at Erika.D.White@usace.army.mil or Mr. Brandon Lee, Contracting Officer at Brandon.Lee@usace.army.mil. Personal visits for the purpose of discussing this announcement will not be scheduled. CAPABILITIES QUESTIONNAIRESECTION 1: GENERAL1. Business Name: (Insert Business Name)2. Business Address: (Insert Business Address)3. Cage Code:4. NAICS Code(s) (check all that apply) :( ) 541512, Computer Systems Design ServicesNOTE: If you feel the above NAICS Code is not sufficient for this acquisition, please provide your recommended NAICS code with an explanation.5. Responsible Point of Contact:6. Check All That Apply: Our firm is a 0 8(a) small business, 0 service-disabled veteran-owned small business, 0 HUBZone small business, 0 Small Disadvantaged Business, 0 Woman Owned, 0 Minority, 0 Native American, 0 Small Business,SECTION 2: CONTRACTOR ARRANGEMENT1. Our firm will be proposing on this project as a:( ) Sole Contractor( ) Prime Contractor (if small business) performing at least 50% of the work with subcontractor(s),( )Prime contractor (if small business) performing at least 50% of the work with the following team member subcontractor(s) (Insert business name, business size, cage code, and work which will be subcontracted), or( ) Joint venture with (Insert business name, business size, and cage code). (See FAR subpart 9.6 for Government policy on teaming arrangements, as well as 8(a)Program regulations described in 13 CFR 124.513, HUBZone Program regulations described in 13 CFR 126.616, and Service-Disabled Veteran-Owned Program regulations described in FAR 19.1403(c) and 13 CFR 125.15(b).)SECTION 3: CAPABILITY2. Has your company ever performed or is in the process of performing work involving UMCS and similar services such as HVAC Systems to include chiller/boiler systems installation and/or integration; BAS; SCADA Systems, and other Automated Control Systems including FAS systems, chemical / biological / radiological contaminant detection / filtration / response, utilities (electric/gas/water/steam) metering; ESS; and security and/or force protection measures such as, but not limited to, barriers, fencing, gates, window treatments, hardening, and lighting worldwide. The associated services will typically include, but not limited to, either Procure & Install (P&I) or Maintenance & Service (M&S) contracts. This experience can be either with Government or Private Industry and shall be within the last 3-5 years. If so, please provide the information below for each project. (request a combination of P&I and M&S projects be included if available)a. Contract Agency with Reference Point of Contact:b. Contract Number:c. Task Order Number (if applicable):d. Role: Prime or Subcontractor (If your performance was tough subcontract or joint partnership, indicate the percentage of work for each partner for each element of service provided.)e. Award Amount: $f. Contract Price Structure (Fixed Priced, Cost Reimbursable, Time & Materials, Hybrid (explain)):g. Project Name:h. Location of Project:i. Description/Scope of Project:3. Does your company have the personnel with the capabilities and qualifications to provide and install UMCS related projects as indicated above? If so, please provide the number of qualified key personnel, their disciplines and certifications, minimum and maximum years of experience and the average years of experience.4. If awarded a contract, our company has the resources and is capable of performing/delivering simultaneously under an indefinite Delivery/Indefinite Quantity Contract (please select one)( ) 1 order( ) 2-5 orders( ) 6-10 orders( ) 11-15 orders( ) 16-20 orders( ) 21-30 orders( ) 30+ ordersPlease also state the average number of projects that your company is working at one time, as it relates to the UMCS scope in Question 2.5. If awarded a contract, the maximum aggregate contract capacity our firm can adequately perform isResponse: tiny_mce_marker____________Please provide the required information from Question 2, or reference the project included in Question 2, for the contract with the maximum aggregate contract capacity that your firm has been awarded over the last 3-5 years as it relates to the UMCS scope in Question 2.6. Are there certain portions of the work that your firm would typically subcontract out? For service contracts, does your firm have the capability to perform 50% or greater of the work on an awarded project?7. Does your company have the capability to manage the site specific equipment requirement determinations, site specific design requirements, equipment acquisitions, site logistics, subcontractor selection /management and quality control processes to complete the work in a cost effective, timely, and contract conforming manner? Please provide a brief description on how you manage these requirements in a project.8. Does your company have experience in providing and maintaining an effective quality control program? Provide examples.9. Does your company have experience in providing and maintaining an effective safety program? Provide examples.10. Does your firm have the ability to work anywhere in the United States (CONUS), as well as Alaska, Hawaii, all U.S. Territories and possessions and overseas locations outside of the United States (OCONUS) including but not limited to Germany, Italy, Korea, United Kingdom, Kuwait, Guam, Malaysia, and Japan? Are there any regional limitations where you can work? Please provide examples of OCONUS locations where your firm has worked.11. Provide specific details of your firm's ability to perform task orders both CONUS and OCONUS simultaneously.12. Does your firm possess or have the ability to obtain a facility clearance up to the SECRET level?
W912DY-12-R-0015 Department of the Army Corps of Engineers Engineering Support Center Huntsville
1/17/17, 11:17 AM Utility Monitoring and Control Systems (UMCS) Services
Added: Nov 16, 2011 1:30 pm This sources sought notice is issued solely for market research and planning purposes only and does not constitute a solicitation. The U.S. Army Engineering and Support Center in Huntsville, Alabama (CEHNC) intends to solicit and award multiple indefinite delivery indefinite quantity (IDIQ) contracts for its Utility Monitoring and Control Systems (UMCS) for Heating, Venting and Air Conditioning Systems to include chiller/boiler systems installation and/or integration, Supervisory Control and Data Acquisition Systems, and other Automated Control Systems including fire alarm and life safety, utilities (electric/gas/water) metering and electronic security systems worldwide. Work requirements will be defined in specific Task Order Performance Work Statements (PWS) under a basic contract PWS. Services will include, but not be limited to development of engineering plans for equipment installation; providing hardware and software; system testing and check-out; facility modification and minor construction required to support equipment installation; providing security and force protection measures; interfacing with and installing new data transmission equipment; determining compatibility of new equipment with existing systems; preparing system and component documentation; providing operation and maintenance manuals; providing UMCS and Electronic Security System training; warranting systems; maintaining and servicing systems; operating and monitoring systems; preparing after action and other reports; and providing as-built installation drawings. Additional information about the UMCS program is available at http://www.hnd.usace.army.mil/umcs/index.aspx and http://www.hnd.usace.army.mil/pao/PAO_Fact_Sheets/UMCS.pdf The Government is performing market research in order to determine the sources available that possess the capability to execute the kind of work identified above prior to issuing a request for proposal (RFP). It is the Government's objective to provide maximum practicable opportunities under this anticipated acquisition to small business concerns. Firms may complete and submit Capability Statements to aid the Government in assessing available sources to perform this work. The Capability Statement form is available at https://www.fbo.gov and https://acquisition.army.mil/asfi . Capability statements must be submitted no later than 5:00 PM Central Time on 16 Dec 2011. Responses will not be returned nor will be considered by the Government as offers. Instead, responses to this notice will only be used to determine capability/availability of sources and serve as a supplementary market research tool to determine the competitive pools (unrestricted and/or restricted under FAR Part 19). Responders are solely responsible for all expenses associated with responding to this request for information. Submit Capability Statements via email to paul.c.daugherty@usace.army.mil with subject line: "UMCS Capability Statement for [firm name]".Because the government is seeking wide participation and has not yet chosen a NAICS code for this acquisition, this sources sought is being issued under the following reference numbers and NAICS codes. Industry is invited to recommend or comment on the selection of the appropriate NAICS code. Only respond to one of these notices and only submit one capability statement. Do not submit duplicate statements. W912DY12R0012 - NAICS 334512 Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseW912DY12R0013 - NAICS 334513 Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesW912DY12R0014 - NAICS 334515 Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsW912DY12R0015 - NAICS 541512 Computer Systems Design Services
W912DY-12-R-0015 Department of the Army Corps of Engineers Engineering Support Center Huntsville
11/16/11, 1:30 PM