Indefinite Delivery Contract W52P1J12D0045
Award Date 4/25/12
Last Date to Order 9/30/16
Funding Federal Agency
Contracting Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
Set-Aside Type
Total Small Business
Federal Contract Vehicle
- Not listed
Pricing Type
Firm Fixed Price
Legislative Mandate
Walsh Healy Act
National Interest Action
None
Award Type
Single
Primary Consortia Member
Not listed Similar IDVs
- This is a multiple-award indefinite delivery contract (IDC) awarded by the U.S. Army Materiel Command to Action Manufacturing Co, a for-profit munitions component manufacturer, for the production of M734A1 multi-option and M783 point detonating/delay mortar fuzes. The $412.8 million IDC has a five-year period of performance ending in 2028 and aims to secure a qualified domestic source for these critical mortar fuze components to support Army munitions requirements. The contract has resulted in...
- This indefinite delivery contract was awarded by the Program Executive Office (PEO) Ammunition, a component of the U.S. Army, to Day & Zimmermann Lone Star LLC, a subsidiary of Day & Zimmermann Lone Star LLC. The contract is for the production and delivery of MK4-3 signal cartridges (NSN: 1325-01-323-9922) with a total contract ceiling value of $8,681,316.17 and an ultimate completion date of October 31, 2027. This is a single-award, firm-fixed-price contract that does not utilize any...
- This federal Indefinite Delivery Contract (IDC) was awarded by the U.S. Army Program Executive Office (PEO) Ammunition to small business manufacturer Polymer Technologies Inc. (PTI) for the delivery of Meltable Fuze Plugs (MFPs). The $5.5 million multiple-award IDC has a 5-year ordering period through February 2029. The MFPs are designed to enhance insensitive munitions safety for 155mm projectiles containing high explosive energetics. Under this contract, PTI will manufacture, produce, and...
- The U.S. Army's Program Executive Office (PEO) for Ammunition has awarded Action Manufacturing Co., a for-profit manufacturer of munitions components, an indefinite delivery contract (IDC) valued at over $412 million for the production of M734A1 multi-option and M783 point detonating/delay (PD/DLY) mortar fuzes from 2023 to 2028. This multiple-award IDC aims to secure a qualified domestic source for these critical mortar fuze components to support the Army's munitions requirements. The...
- This federal contract IDV award to American Rheinmetall Munition Inc., a foreign-owned, for-profit defense manufacturer, was issued by the U.S. Air Force. The $25.13 million single-award Indefinite Delivery Contract (IDC) covers the procurement of MK 1 MOD 0 fuzes and training bodies through September 2028. Multiple task orders under this IDC have been awarded, including a $390,596.60 firm fixed-price delivery order for MK 1 MOD 0 fuzes with a period of performance through February 2027, a...
- This indefinite delivery contract (IDC) was awarded by the U.S. Army's Joint Munitions Command to Tool Masters Inc., a small business manufacturer, to provide metal parts for various hand grenade models in support of the Program Manager - Close Combat Systems (PM-CCS). The $18.28 million single-award contract has a performance period from May 2025 to May 2030. The contract requires Tool Masters Inc. to manufacture and deliver metal bodies, tops, and starter cups for the M18, M83, AN-M14, M7A3,...
- This Indefinite Delivery Contract (IDC) awarded by the U.S. Army's Program Executive Office (PEO) Ammunition is a multiple-award, 100% small business set-aside contract with a ceiling value of $5,497,613 and a period of performance from February 2024 to February 2029. The prime contractor is RTI Technologies, LLC, a for-profit limited liability company and manufacturer of goods located in Columbia, Connecticut. The contract is for the manufacture, production, and delivery of meltable fuze...
- The key products and services being delivered under this federal contract IDV award are the manufacture and delivery of the M739A1 Point Detonating/Delay (PD/DLY) fuze. The prime contractor is Amtec Corporation, a subsidiary of National Presto Industries located in Janesville, Wisconsin. The indefinite delivery contract, valued at up to $497,163,176.81, was awarded by the U.S. Army's Program Executive Office (PEO) Ammunition and does not utilize any set-aside designations. The contract has a...
- This single award, firm fixed price indefinite delivery contract was issued on September 25, 2015 by the Department of the Army to L3 Fuzing And Ordnance Systems, Inc. for the production of M762A1/M767A1 Safe and Arm assemblies. The potential value of the contract is $14.9 million over five ordering periods concluding on September 24, 2023. Three delivery orders have been awarded against this contract to date. Delivery Order 0001, awarded September 29, 2015, had a value of $1.264 million for...
- The Department of the Navy's Naval Sea Systems Command awarded an Indefinite Delivery Contract (IDC) to Alliant Techsystems Operations LLC, a division of Northrop Grumman Corporation, to provide MK419 multi-function fuzes and MK92 BL&P projectiles. The contract has a ceiling value of $74.5 million and a period of performance through September 2020. Under this IDC, the Navy has issued three delivery orders totaling over $53 million for the production and delivery of these munitions components...
- W52P1J12D0045Indefinite Delivery Contract
- 4Federal Contract Awards
PRODUCTION OF MK4 CAP, FUZE PROTECTORS. AWARD OF IDIQ CONTRACT WITH 5 ORDERING PERIODS; DATE OF AWARD THROUGH 30 SEPT 2016.
Posted 4/25/12
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| P00005 | Change Order | $0 | 6/15/15 | |
| P00004 | Supplemental Agreement for work within scope | $0 | 9/5/13 | |
| P00003 | Other Administrative Action | $0 | 8/30/12 | |
| P00002 | Supplemental Agreement for work within scope | $0 | 8/7/12 | |
| P00001 | Other Administrative Action | $0 | 6/15/12 |
Name | Description | Awardee | Potential Value | AwardDate | CompletionDate | Updated At |
|---|---|---|---|---|---|---|
Delivery Order W52P1J12D0045-0004 | Aggressive Engineering Corp | $101.1k | 8/24/16 | 4/28/17 | 8/24/16 | |
Delivery Order W52P1J12D0045-0003 | Aggressive Engineering Corp | $297.5k | 5/15/15 | 5/31/16 | 9/13/15 | |
Delivery Order W52P1J12D0045-0002 | Aggressive Engineering Corp | $120.3k | 9/12/13 | 10/31/14 | 10/21/14 | |
Delivery Order W52P1J12D0045-0001 | Aggressive Engineering Corp | $318.0k | 4/25/12 | 8/29/14 | 7/24/18 |
Name | Description | Solicitation Number | FederalAgency | Type | PostedDate |
|---|---|---|---|---|---|
Cap Fuze Protector; NSN 8140-00-038-9909; P/N 53711-437782 | W52P1J-10-R-0214 | Department of the Army Materiel Command Joint Munitions Command | Award Notice 2/3 | 8/16/11, 3:06 PM | |
AMMUNITION AND NUCLEAR ORDNANCE BOXES, PACKAGES AND SPECIAL CONTAINERS | W52P1J10R0214 | Department of the Army Materiel Command Joint Munitions Command | Award Notice 3/3 | 4/25/12, 9:20 AM | |
Sources Sought Cap, Fuze Protector, Mark 4 Mod 0 - Drawing number 437782; Cap, Fuze Protector, Mark 10 Mod 1 - Drawing number 2839; Cap - Drawing number 2839215 and Snap Ring - Drawing number 2839200. | W52P1J10R0214 | Department of the Army Materiel Command Joint Munitions Command | Award Notice 1/3 | 8/9/10, 10:59 AM |