Indefinite Delivery Contract W15QKN18D0083
Award Date
6/28/18
Last Date to Order
6/27/25
Funding Federal Agency
PEO Ammunition
Contracting Federal Agency
ACC Picatinny
Awardee
Action Manufacturing Co
Ultimate Awardee
Not listed
NAICS Category
332993 - Ammunition (except Small Arms) Manufacturing
PSC Category
1390 - Fuzes And Primers
Set-Aside Type
No Set-Aside Used
Federal Contract Vehicle
Pricing Type
Order Dependent (IDV only)
Legislative Mandate
Walsh Healy Act
National Interest Action
None
Award Type
Multiple
Primary Consortia Member
Not listed
Similar IDVs
The Department of the Army awarded Action Manufacturing Co. an indefinite delivery contract with a potential value of $412,755,410 to manufacture and deliver M734A1 multi-option and M783 point detonating/delay mortar fuzes from 2023 through 2028. Against this contract vehicle, two task orders have been issued to date totaling $20,489,022.69 for the purchase of M783 fuzes. Performance will take place at Action Manufacturing's facility in Bristol, Pennsylvania from June 2023 through January...
This Indefinite Delivery Contract (IDC) was awarded by the U.S. Army Contracting Command-New Jersey, on behalf of the Office of the Project Manager Combat Ammunition Systems, to L3Harris Fuzing And Ordnance Systems, Inc. The contract has a ceiling value of $412,755,410.00 and a period of performance through March 20, 2028. It is a multiple award vehicle to provide the M734A1 Multi-Option Fuze for Mortars (MOFM) and the M783 Point Detonating/Delay Mortar Fuze. These fuzes are used in 60mm,...
This single-award Indefinite Delivery Contract (IDC) was awarded by the U.S. Army Contracting Command - Rock Island (ACC-RI) on behalf of the Office of the Project Manager for Combat Ammunition Systems to Junghans Microtec GMBH, a foreign-owned for-profit manufacturer. The contract has a ceiling value of $49,850,000 and a period of performance from August 3, 2024 to September 30, 2028.
The contract is for the procurement of the M772 Mechanical Time Super Quick (MTSQ) Fuze and the M776 MTSQ...
The U.S. Army Program Executive Office for Ammunition awarded a $533.9 million single-award Indefinite Delivery Contract (IDC) to Northrop Grumman Systems Corporation (NGSC) Weapon Systems Division, a subsidiary of Northrop Grumman Corporation, for the procurement of M782 Multi-Option Fuzes for Artillery (MOFA). This 5-year IDC allows the Army to issue firm-fixed-price delivery orders for up to approximately 500,000 MOFA units, which are critical ordnance components used in 105mm and 155mm...
This indefinite delivery contract (IDC) award W519TC24D0003 was made by the U.S. Army Program Executive Office (PEO) Ammunition to L3Harris Fuzing And Ordnance Systems, Inc., a subsidiary of L3Harris Technologies, Inc. The contract has a ceiling value of $871,583,197.00 and a period of performance through January 4, 2029.
The primary purpose of this IDC is for L3Harris Fuzing And Ordnance Systems to produce M767A1 electronic timing fuzes in support of various Army and Navy weapons platforms...
The Department of the Army awarded a single-award, indefinite delivery contract to Alliant Techsystems Operations LLC with a potential value of $84.5 million to procure fuzes for the FMU-143 fuze family. The contract is a three-year IDIQ with an ordering period ending September 30, 2019. Task orders issued to date under the contract include $18.76 million for ordering period one and $18.18 million for FMU-143 fuzes, both with completion dates of September 30, 2019. Place of performance will...
The Department of the Army Acquisition Support Center PEO Ammunition awarded Amtec Corporation, a subsidiary of National Presto Industries, an Indefinite Delivery Contract for the manufacture and delivery of the M739A1 Point Detonating/Delay (PD/DLY) Fuze. This multiple-award IDV has a potential value of $497,163,176.81 and runs through June 2025. Amtec, an experienced manufacturer of 40mm ammunition components, will perform the work out of its Janesville, Wisconsin facility.
Under this IDV,...
The U.S. Army Program Executive Office (PEO) for Ammunition awarded Nammo Pocal Inc., a foreign-owned defense manufacturer, a $74,746,526.00 single-award Indefinite Delivery Contract (IDV) to manufacture, test, package, and deliver M751, M775, and M781 point detonating mortar practice fuzes. This IDV has an ultimate completion date of July 1, 2029.
As part of this IDV, the Army issued a $4,877,050.96 firm fixed-price delivery order to Nammo Pocal for the first article test approval and...
This indefinite delivery contract (IDC) was awarded by the U.S. Army Materiel Command to the prime contractor Action Manufacturing Co., a for-profit corporation specializing in the production of munitions components for the U.S. Department of Defense.
The $500,000 IDC, awarded on March 28, 2007 without any set-aside, is for the manufacture of AMMUNITION MANUFACTURING (SMALL ARMS). The contract has an ultimate completion date of March 27, 2012. Action Manufacturing Co. has a track record of...
This Indefinite Delivery Contract (IDC) was awarded by the U.S. Army Program Executive Office (PEO) Ammunition to UDC USA, Inc., doing business as Ultra Defense Corp., a for-profit manufacturer of specialized ammunition, weapons, and related accessories for the military and federal law enforcement. The $27 million single-award small business set-aside IDC is for the purchase of M81 fuse ignitors, which are components used to initiate the functioning of munitions.
Under the base IDC, the Army...