Project Grant N000242514443
- Federal Project Grant Award Summary The Naval Sea Systems Command awarded a $909,186 Project Grant to BAE Systems Maritime Solutions Norfolk Inc. (operating as Norshipco) on September 30, 2025, under the Improvement of Navy Ship Repair or Alterations Capability Program (CFDA 12.031). The grant funds the procurement and installation of an MPC2000 Precision Cutting System at the awardee's Norfolk, Virginia facility, with an ultimate completion date of May 12, 2026. This capital equipment...
- Federal Project Grant Award Summary Metro Machine Corp., operating as General Dynamics NASSCO-Norfolk, received a $285,000 Project Grant from the Naval Sea Systems Command under the Improvement of Navy Ship Repair or Alterations Capability Program (CFDA 12.031) on September 30, 2025, with a completion date of September 30, 2026. The award funds the procurement of precision accuracy control equipment designed to enhance documentation accuracy for pre-availability compartment legacy and...
- Federal Project Grant Award Summary BAE Systems Maritime Solutions Norfolk Inc. (Norshipco) received a $167,690 Project Grant from the Naval Sea Systems Command under the Improvement of Navy Ship Repair or Alterations Capability Program (CFDA 12.031) on September 30, 2025. The funding supports the procurement and installation of an LS TB9660 Wheel Blast Machine, a surface preparation equipment system designed to clean, strip, and finish metal surfaces using abrasive media and compressed air....
- Federal Grant Award Summary Bay Ship & Yacht Co. received a $388,777 Project Grant from the Maritime Administration's Assistance to Small Shipyards program (CFDA 20.814) awarded on August 19, 2025, with a performance period extending through August 18, 2027. The grant funds the purchase and installation of Computer Numerical Control (CNC) plasma arc/gas cutting equipment at the company's Alameda, California facility. This capital equipment acquisition is designed to enhance operational...
- Federal Grant Award Summary Award Details: Awardee: Fincantieri Marine Repair LLC Funding Agency: Naval Sea Systems Command (NAVSEA), Department of the Navy Federal Grant Program: Improvement of Navy Ship Repair or Alterations Capability (CFDA 12.031) Award Date: October 1, 2025 Total Funding Obligated: $220,020.00 Ultimate Completion Date: May 30, 2026 Place of Performance: Jacksonville, Florida Products and Services: Under this Project Grant, Fincantieri Marine Repair LLC will acquire four...
- Federal Grant Award Summary The U.S. Department of Transportation's Maritime Administration (MARAD) awarded Heartland Fabrication LLC a $588,092 Project Grant under the Assistance to Small Shipyards program (CFDA 20.814) on August 19, 2025, with a completion date of August 18, 2027. The primary deliverable is the purchase and installation of a low-profile Koike Aronson Platepro XHD Model 3700 plasma cutter with 148-inch cutting width at the company's Brownsville, Pennsylvania facility. This...
- Federal Project Grant Award Summary Propulsion Controls Engineering received a $105,489 Project Grant from the Naval Sea Systems Command under the Improvement of Navy Ship Repair or Alterations Capability Program (CFDA 12.031) for the period January 1, 2026 through December 31, 2026. The award funds the enhancement of Propulsion Controls Engineering's maritime training program, specifically targeting the development and expansion of curriculum content focused on regulatory compliance, industry...
- Federal Grant Award Summary The Maritime Administration awarded Marine Group Boat Works, LLC a $248,402.50 project grant on August 19, 2025, under the Assistance to Small Shipyards program (CFDA 20.814). The grant funds the purchase and installation of a Flow Mach 500 waterjet metal cutting table at the company's Chula Vista, California shipyard facility, with performance extending through August 18, 2027. This capital equipment acquisition represents the primary deliverable and constitutes...
- Federal Grant Award Summary The Naval Sea Systems Command awarded Marisco, LTD. a $372,840 Project Grant on October 1, 2025, under the Improvement of Navy Ship Repair or Alterations Capability Program (CFDA 12.031). The grant funds the acquisition of a new U.S.-built telehandler for use in Navy ship repair operations at Marisco's shipyard facilities in Hawaii, specifically at Barbers Point Harbor and Pearl Harbor Naval Shipyard. This capital equipment acquisition is designed to enhance...
- Federal Grant Award Summary On August 19, 2025, the Maritime Administration awarded Snow & Company, Inc. a $817,150 Project Grant under the Assistance to Small Shipyards program (CFDA 20.814) to support capital equipment improvements at its Seattle, Washington shipyard facility. The grant funds the purchase and installation of three specialized pieces of fabrication equipment: a Computer Numerical Control (CNC) laser cutting machine capable of cutting steel, stainless steel, aluminum, and...
On August 30, 2025, the Naval Sea Systems Command (NAVSEA) awarded a $538,817 Project Grant to Bay Metals & Fabrication, LLC under the Improvement of Navy Ship Repair or Alterations Capability Program (CFDA 12.031). The grant funds the acquisition and installation of an X Series RoboFab Beam robotic plasma cutting system at the awardee's Chesapeake, Virginia facility. The equipment purchase and implementation project, scheduled for completion by February 26, 2026, includes operator training, facility preparation, and system commissioning. This capital improvement project will modernize Bay Metals & Fabrication's structural steel fabrication capabilities by automating manual cutting processes for beams, pipes, tubes, and channels. The robotic plasma cutting system is designed to enhance the awardee's capacity to support Navy surface combatant and amphibious ship repair and alteration work. Key performance objectives include reducing production time for structural steel components by up to 80 percent, achieving precision tolerances within ±0.01 inches, and improving labor efficiency by reallocating skilled workers from manual cutting tasks to higher-value assembly operations. The system will integrate with Bay Metals & Fabrication's existing computer-aided design and computer-aided manufacturing (CAD/CAM) workflow, enabling faster project delivery timelines and improved quality control for the company's naval and commercial clients.Federal Project Grant Summary
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| Not listed | $538.8k | 9/30/25 |