Project Grant 2208183

Award Date 9/1/22
Completion Date 8/31/23
Dollars Obligated $256K
Federal Grant Program
47.084
Assistance Type
Project Grant
Place of Performance
Davis, CA, USA
Similar Awards
The National Science Foundation awarded Ionicscale LLC $256,000 under the Technology, Innovation, and Partnerships federal grant program to develop low-cost, portable mass spectrometers based on a chip-scale ion trap mass analyzer. The award aims to advance the company's technology for ubiquitous, high-specificity chemical analysis through a novel ion trap geometry that can be microfabricated at lower costs. This has the potential to bring mass spectrometry capabilities, which are currently...
This National Science Foundation (NSF) Cooperative Agreement award, funded under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program, supports the development of a novel, miniaturized ion trap mass spectrometer technology by Ionicscale LLC, a small technology company. The $1,000,000 project aims to create an ultra-compact, remotely programmable chemical analyzer that can greatly expand the accessibility and affordability of mass spectrometry-based chemical detection and...
The National Science Foundation (NSF) awarded a $650,000 Project Grant under the NSF Technology, Innovation, and Partnerships program (CFDA 47.084) to The Washington University Office of Sponsored Research Services Division. The project aims to develop a novel, insect-inspired, nanoparticle-based chemical sensor for detecting explosive volatile organic compounds using artificial intelligence (AI). The short-term goal is to fabricate and demonstrate a proof-of-concept, portable AI-enabled...
This National Science Foundation (NSF) Convergence Accelerator Track L Project Grant, with a total funding of $650,000, aims to innovate and mature two miniature volatile organic compound (VOC) sensing technologies - colorimetric VOC sensor arrays and wearable VOC sensor patches. The project team, consisting of engineers, chemists, material scientists, biologists, and data scientists, will leverage machine learning and bio-inspired design to develop cost-effective, field-portable, and highly...
Ionicscale LLC was awarded a $175,000 Project Grant from the Department of Agriculture's National Institute of Food and Agriculture under the Small Business Innovation Research (SBIR) Program to develop membrane-based inlet systems for compact mass spectrometry-based chemical sensors. The goal of the seven-month project ending February 2024 is to enable risk reduction in deploying low-cost sensors for soil or liquid sampling. Work will focus on designing membrane inlets compatible with...
This Project Grant award from the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) supports the design, optimization, modeling, and initial validation of a high-sensitivity integrated photonic Raman spectrometer by Perceptra Technologies, Inc. The $275,000 award aims to demonstrate the technical feasibility of compact, low-cost optical sensors that can provide on-demand and real-time chemical analysis, addressing the lack of...
This National Science Foundation Technology, Innovation, and Partnerships Project Grant of $256,000 will support the development of a novel mass spectrometer by Moires Instruments, LLC to identify molecular isomers and distinguish their conformational forms. The instrument uses high electric fields to manipulate neutral molecules based on their dipole moments, separating them by mass-to-dipole-moment ratio rather than conventional mass-to-charge ratio. This approach aims to reduce the...
This National Science Foundation Project Grant of $255,261 awarded under the NSF Technology, Innovation, and Partnerships program (CFDA 47.084) will fund the development of optimized extraction and projection optics for ion point sources. Steam Instruments Inc. will demonstrate technology advances in imaging mass spectrometry through this Small Business Innovation Research Phase I project. Specifically, the company aims to markedly improve mass resolving power to separate key mass...
This Small Business Innovation Research (SBIR) Phase I project, awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084), aims to develop optimized high surface area functionalized nanomaterials for parts per billion (PPB) gas sensing using machine learning models. The $274,991 award to Atmosense, Inc., a minority-owned small business located in San Diego, CA, will fund the research and development of advanced materials...
The National Science Foundation (NSF) awarded a $650,000 Project Grant under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program to the University of California, Los Angeles (UCLA) to develop a suite of portable, quantum-enhanced sensors for detecting and identifying bioaerosols. The project aims to advance the technology readiness level of sensor technologies targeting bioaerosols, which directly impact human, animal, plant, and climate health. The key products to be...

This Project Grant from the National Science Foundation's Technology, Innovation, and Partnerships program totaling $256,000 will fund the development of an optimized ion mobility spectrometry system for distributed chemical sensing without the use of radioactive ionization sources. The awardee, Sensit Ventures Inc. of Davis, California, will establish an experimental and theoretical framework to miniaturize differential mobility spectrometry technology for analytical-quality chemical identification. By combining a non-radioactive plasma-based ionization method with differential mobility spectrometry microchips powered by lithium-ion polymer batteries, the awardee aims to develop a low-cost, high-performance chemical sensor system suitable for integration into Internet of Things networks. Initial proof-of-concept applications will target the detection of natural gas odorants and selected food and flavor compounds. The goal of the one-year project beginning September 1, 2022 is to validate custom software modeling of the system's performance to facilitate further miniaturization and commercialization opportunities for distributed chemical sensing applications across various industries.

Generated 1/7/24, 5:50 AM