Cooperative Agreement 2233023

Award Date 4/15/23
Completion Date 3/31/27
Dollars Obligated $1.5M
Federal Grant Program
47.084
Assistance Type
Cooperative Agreement
Place of Performance
Philadelphia, PA 19146, USA
Similar Awards
This National Science Foundation (NSF) Small Business Innovation Research (SBIR) Phase I grant, CFDA #47.084 "NSF Technology, Innovation, and Partnerships", provides $275,000 to Hoverr Inc. to develop and optimize a novel electric vacuum thruster device that could revolutionize transportation by enabling propulsion without traditional fuels. The project aims to (1) develop and improve a prototype using advanced materials and design refinements, and (2) confirm the technology's...
The National Science Foundation (NSF) awarded a $272,800 SBIR Phase I Project Grant to Morningbird Media Corporation to develop and test a prototype propulsion engine that utilizes electromagnetic energy to enable high-speed space travel. The goal is to create a fundamentally new approach to spacecraft propulsion that could lead to orders of magnitude faster space travel compared to current chemical propulsion systems. The key technical objectives are to develop a complex dielectric material and...
The National Science Foundation (NSF) awarded a $275,000 Small Business Innovation Research (SBIR) Phase I grant to Biotronic Innovations LLC under the NSF Technology, Innovation, and Partnerships program (CFDA 47.084). The project aims to develop a high-performance, drone-based wildlife telemetry technology that is economical and easy to use. The research plan focuses on creating a co-robotic system that employs an unmanned aerial vehicle (UAV) as an assistant wildlife tracker, fusing data from...
The National Science Foundation awarded a $100,000 Project Grant to the University of Arkansas to develop servomotor actuators using advances in metallic additive manufacturing under the NSF Technology, Innovation, and Partnerships program (CFDA 47.084). The grant supports the development of electric motors and position control actuators with over 40% increased torque and power density compared to existing technologies. By integrating sensor and electronic control functions into a single modular...
This Project Grant award from the National Science Foundation (NSF) under the NSF Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) provides $550,000 to develop electric motors that use electromagnetic forces to eliminate bearings. The project aims to transform the reliability, lifetime, efficiency, and utility of electric motors and generators across industries like transportation, manufacturing, and medical equipment. By creating a cost-effective solution that uses...
This National Science Foundation (NSF) Small Business Innovation Research (SBIR) Phase I project, funded through the NSF Technology, Innovation, and Partnerships program (CFDA 47.084), aims to extend the range of on-hand wireless communications devices to austere and remote environments. The $246,858 award to Set Point Solutions LLC, a HUBZone certified small business, will enable the development of the Propeller-enabled Projectile Assisted Repeater/Relay of Transmissions (PARROT) technology....
This SBIR Phase I award from the National Science Foundation (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) provides $275,000 to Unlab LLC, a small business located in Savannah, GA, to develop a new type of propulsion system based on quantum vacuum fluctuations. The project aims to fabricate asymmetric nanostructure devices on micro-scale cantilevers and measure the deflection caused by the forces generated through the interaction between quantum vacuum fluctuations...
The National Oceanic and Atmospheric Administration awarded Dragoon Technology LLC $599,555.33 under the Small Business Innovation Research Program to develop a lightweight, long endurance unmanned aircraft system for tropical cyclone meteorological data collection. The SBIR program seeks to stimulate technological innovation through small business partnerships to meet federal research needs. Specifically, Dragoon will develop a sub-30 pound unmanned aircraft with over 24 hours of flight...
Fluxworks, Inc., a HUBZone-certified small business, was awarded a $261,795 SBIR Phase I grant from the National Science Foundation (NSF) Technology, Innovation, and Partnerships (CFDA 47.084) program in April 2024. The grant supports the development and validation of Fluxworks' patented "Flux Angle Mapping" (FAM) magnetic gearbox technology. The project aims to design, fabricate, and test a prototype FAM magnetic gearbox, as well as characterize the performance of an improved...
The National Science Foundation (NSF) awarded a $274,853 Technology, Innovation, and Partnerships (CFDA 47.084) grant to Pitch Aeronautics Inc., a veteran-owned small business, to develop techniques for localizing drones near power lines and control strategies for installing, removing, and maintaining dynamic line rating (DLR) sensors on power lines. The project aims to alleviate the backlog of renewable energy projects desiring to connect to the power grid by automating the installation and...

SBIR PHASE II: AN INNOVATIVE CALIBRATION SOFTWARE TO SUPPRESS TORQUE RIPPLE AND IMPROVE PERFORMANCE OF ELECTRIC MOTORS. -THE BROADER/COMMERCIAL IMPACT OF THIS SMALL BUSINESS INNOVATION RESEARCH (SBIR) PHASE II PROJECT WILL IMPROVE THE ELECTRIC MOTOR MARKET AND PROVIDE THE COMPETITIVE ADVANTAGE TO THE US IN MOBILE ROBOTIC APPLICATIONS. ELECTROMAGNETIC FLAWS IN BRUSHLESS DIRECT CURRENT (DC) MOTORS AND SENSORLESS CONTROLLERS HAVE SEVERELY LIMITED THE PERFORMANCE OF MOBILE ROBOTS AND STYMIED THE POTENTIAL GROWTH OF THE INDUSTRY. HIGH PERFORMANCE SERVO MOTORS AND MOTOR CONTROLLERS DO EXIST, BUT THEY ARE TOO HEAVY, LARGE, AND EXPENSIVE TO BE INCORPORATED INTO MANY ROBOTIC APPLICATIONS, PARTICULARLY MOBILE ROBOTS. BY COMBINING A UNIQUE HARDWARE DESIGN WITH A SOFTWARE SOLUTION TO ELIMINATE INTRINSIC HARDWARE PROBLEMS, THIS PROJECT WILL RESULT IN AN ULTRA-COMPACT, HIGH PERFORMANCE, AND LOW-COST ELECTRIC SERVOMOTOR. THE DRONE INDUSTRY IS EXPECTED TO BE THE FIRST TO BENEFIT FROM THE PROPOSED SOLUTION, AS MANY COMMERCIAL AND DEFENSE DRONE COMPANIES ARE IN NEED OF INDUSTRIAL-GRADE PROPULSION COMPONENTS. A SUPERIOR PROPULSION SOLUTION WILL ACCELERATE THE MASS ADOPTION OF DRONES AND OTHER MOBILE ROBOTS. THIS SMALL BUSINESS INNOVATION RESEARCH (SBIR) PHASE II PROJECT SEEKS TO CREATE THE NEXT GENERATION OF DRONE PROPULSION TECHNOLOGY: AN INNOVATIVE DRONE MOTOR AND CONTROLLER. CURRENTLY, DRONE COMPANIES ARE FORCED TO USE HOBBY-GRADE, SENSORLESS MOTORS AND CONTROLLERS, WHICH SUFFER FROM POOR PERFORMANCE AND RELIABILITY ISSUES. THE PHASE II PROJECT IS ROOTED IN THE RESULTS OBTAINED DURING PHASE I ACTIVITIES, WHICH LED TO THE DEVELOPMENT OF A CALIBRATION SUITE AND A NOVEL MOTOR DESIGN. PHASE I LAID THE FOUNDATION FOR CREATING AN ULTRA-COMPACT, HIGH-PERFORMANCE MOTOR AND CONTROLLER SOLUTION THAT IS IDEAL FOR DRONE PROPULSION. THE NOVEL HARDWARE DESIGN MINIMIZES MASS AND PRODUCTION COSTS AND, WHEN COMBINED WITH THE CALIBRATION SUITE AND ANGLE COMPENSATION ALGORITHM, THE SOLUTION OFFERS A SUBSTANTIAL ENHANCEMENT IN PROPULSION EFFICIENCY, CONTROLLABILITY, AND RELIABILITY. THE TEAM WILL TEST ITS PRODUCT WITH INDUSTRIAL DRONE MANUFACTURERS TO VERIFY ITS ABILITY TO INCREASE VEHICLE FLIGHT TIME, ENHANCE MANEUVERABILITY, AND MINIMIZE CRITICAL VEHICLE FAILURES. THIS AWARD REFLECTS NSF'S STATUTORY MISSION AND HAS BEEN DEEMED WORTHY OF SUPPORT THROUGH EVALUATION USING THE FOUNDATION'S INTELLECTUAL MERIT AND BROADER IMPACTS REVIEW CRITERIA.

Posted 4/7/23, 12:00 AM