DFAC COMMERCIAL-GRADE KITCHEN MAINTENANCE & REPAIR
SOLICITATION: W911YP20R0006 AGENCY/OFFICE: Utah Army National Guard / USPFO PLACE OF PERFORMANCE: Utah Army National Guard / Camp Williams-DFAC Facility 17800 S Camp Williams Rd Bluffdale, UT 84065 SUBJECT: DFAC Kitchen Equipment Maintenance & Repair RESPONSE DUE DATE: 12:00 PM MST 6 June 2020 CONTRACTING POC: William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 8014324273 DESCRIPTION: *****THIS REQUIREMENT IS BEING SOLICITED AS A CASCADING SMALL BUSINESS (SB) SET-ASIDE, WITH PRECENDENCE TO SMALL BUSINESSES FIRST*** The Utah National Guard is soliciting a requirement for DFAC Kitchen Equipment Maintenance under combined synopsis/solicitation W911YP20R0006 and is being issued for Request for Quotations (RFQ). This requirement is being solicited as a Cascading Small Business set-aside under NAICS code 811310 “Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance” which has a Small Business Size Standard of $7.5 million (https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf). FOR VENDOR’S QUOTES TO BE CONSIDERED, YOU MUST BE REGISTERED IN SAM.GOV AS A SMALL BUSINESS UNDER THIS NAICS CODE OR VERY SIMILAR NAICS CODE. Furthermore, your company must also demonstrate you have performed work on similar projects that shows you have the knowledge and expertise of these type of commercial kitchen maintenance and repairs. 640 RTI DFAC Performance Work Statement 1 - PREVENTATIVE MAINTENANCE SERVICES The Dining Facility (DFAC) includes many pieces of commercial kitchen equipment. This performance work statement requires a bid for specific manufacturer recommended checks and services to be completed on all types of equipment, including walk-in/reach-in refrigerators and freezers, ventilation hoods, and serving/cooking/sanitation equipment. Inspections and services will be conducted in accordance with requirements laid out in the document. Contractor will bid on separate line to include additional repairs as necessary. Routine maintenance and services will be conducted during normal business hours (Monday tough Friday 0600 – 1700) and scheduled at least two weeks before service. Contract modifications may be issued in the case of the dining facility purchasing or installing additional equipment. A site visit will be scheduled if necessary so that any potential contractor may walk tough the facility if they wish. Minimum required cleaning/servicing is as follows: Refrigeration Equipment SCOPE: Refrigeration equipment included on itemized list require services according to manufacturer recommended service schedule. At a minimum, this contract requires quarterly cleaning of condenser coils using appropriate chemical cleaning treatments, water filtration systems, and general compressor area cleaning of dirt, dust, lint, and debris. Additional recommended services may be described by the contractor in their bid. Cooking Equipment SCOPE: Kitchen cooking equipment is to be checked quarterly by contract holder; Manifolds, burners, temperature gauges, water filtration systems, etc. will be cleaned and maintained as needed, as well as manufacturer recommended services. Additional recommended services may be described by the contractor in their bid. Serving Equipment SCOPE: Serving equipment will be checked quarterly by contract holder; Water wells heating element, rotating motor on desert display, temperature gauges, etc. will cleaned and maintained as needed, as well as manufacturer recommended services. Additional recommended services may be described by the contractor in their bid. Cleaning/ Sanitizing Equipment SCOPE: These pieces of equipment require services according to manufacturer recommended service schedule. At a minimum, this contract requires quarterly maintenance on water booster, using appropriate chemical cleaning treatments, hard water build- up, conveyer preservation, filtration system, etc. Additional recommended services may be described by the contractor in their bid. Base Contract price for preventative maintenance services: $ per year. Contractor shall provide a maintenance plan for each piece of equipment that, at a minimum, meets manufacturer recommended checks and services. 2 - REPAIRS: The second part of this contract will provide the Utah National Guard’s 640th Regiment RTI Dining Facility a mechanism to address emergency or unforeseen repairs of the equipment outlined in this scope of work as necessary. If any equipment needs repairs, the contractor will be contacted directly by 640th RTI Dining Facility Staff. Submission of itemized receipts for replacement parts need to be submitted with repair invoices. Maximum response time when notified of repairs: Ventilation hoods: 2 hours Refrigeration: 4 hours All other equipment listed toughout this scope: 12 hours Contractor’s Rates for Repairs: Hourly Labor Rate: $ Parts/Discounts – (Please describe any discounts you may offer, including a percentage discount to parts prices, or any other discounts you would consider) Describe warranty - 3 - GENERAL LIABILITY INSURANCE: The contractor will maintain liability insurance, in a coverage amount acceptable to the Contracting Officer (KO), which is not less than the amount normally prevailing within the local community for commercial repair services. LICENSING: Contractor shall ensure all repair and maintenance services are performed by a licensed technician registered with the state of Utah. COR ASSIGNMENT & NOMINATION: The Contracting Officer shall appoint a Contracting Officer Representative (COR) for this service requirement. The COR shall be appointed in writing, have all required COR training completed, and shall have applicable experience in managing service contracts within the 640th RTI. COORDINATION / QUALITY ASSURANCE ISSUES: Contractor shall, upon request, consult with the COR or the KO by telephone to coordinate or resolve compliance, quality, logistical, or any other issues that might arise before, during, and after repair & maintenance services. The Contractor shall notify the Contracting Officer (KO) in writing of any quality assurance issues and/or any changes to the contract. QUALITY ASSURANCE SURVEILLANCE PLAN (QASP): A Quality Assurance Surveillance Plan (QASP) listing the procedures or processes, shall be utilized to validate the terms and conditions are successfully met as discussed in the PWS. PERSONAL PROTECTIVE EQUIPMENT (PPE): Contractor shall furnish and assure technicians are provided with the appropriate PPE to perform the duties outlines in the PWS. Some PPE examples include, but not limited to: gloves, protective eyewear, facemasks, earplugs, steeltoe boots/shoes, etc., where there is a potential for exposure to potentially infectious materials or hazardous conditions. COVID-19 AND PPE: Should COVID-19 be a concern in performing the duties outlined in the PWS, the Contractor shall ensure all technicians are properly equipped with the appropriate PPE (i.e. facemasks, faceshields, gloves). The Contractor shall ensure all technicians are healthy and not showing signs of sickness. The Contractor shall perform a temperature check of each technician prior to them performing the repair or maintenance service on site. The Contractor shall provide all technicians with personal hand sanitizer. MAINTENANCE SCHEDULE: Contractor shall provide, at a minimum, quarterly maintenance on all commercial kitchen equipment. The COR reserves the right to request maintenance as needed (if applicable). SERVICE DELIVERY SUMMARY (SDS): A Service Delivery Summary shall be completed by the COR for each service performed, either quarterly maintenance or unscheduled repair service. The Service Delivery Summary shall include, but not limited to, the following performance objectives and standards: Insured & Licensed and/or Certified technicians 100% of the time Quarterly Maintenance performed or as requested by the COR Were service repair calls performed within the Maximum Response times, as outlined in the PWS? Equipment maintenance & repair certification Equipment meets or exceeds performance standards The PWS conveys the basic requirements, performance standards and assessment measures that will apply to all issued maintenance and repair requests. Performance standards, when stated in the PWS, provide a general basis for measuring the performance of each requirement associated with the standard. The Contractor shall perform in accordance with the requirements of this PWS and the requirements of each maintenance and repair request. The service requirements are summarized into performance objectives. The performance teshold briefly describes the minimum acceptable levels of service required for each requirement when applicable. GOVERNMENT REMEDIES: The Contracting Officer (KO) shall follow the requirements of FAR 52.246-4, Inspection of Services – Fixed Price (AUG 1996), for Contractor’s failure to correct non-conforming services. In the event that services fail to conform to contract requirements and cannot be remedied by re-performance, the Government reserves the right to reduce the contract price to reflect the reduced value of the non-conforming services. The Government will notify the Contractor of weaknesses or discrepancies as they become apparent. The first notification will be to attempt to obtain re-performance, if possible. Deficiencies that exceed the SDS acceptable levels will be issued on a Contract Discrepancy Report. Unsatisfactory performance may result in a cure notice. MANAGEMENT PERSONNEL: The Contractor shall appoint one Contract Manager and a back-up manager, who will the Contractor’s authorized point of contact with the COR. The appointment shall be in writing. The Contract Manager shall have full authority to commit the Contractor on matters concerning the contract. REIMBURSEMENT FOR TRAVEL EXPENSES: All services performed will be at the DFAC facility located on Camp Williams, Bluffdale, UT. No reimbursement shall be made for travel expenses. All travel costs are the sole responsibility of the Contractor. EVALUATION OF CONTRACTOR PERFORMANCE: Reference FAR Clause 52.246-4, Inspection of Services – Fixed Price. The Contractor’s performance will be evaluated after each quarterly maintenance service and service repair. For those tasks listed in the SDS, the Quality Assurance Evaluator (QAE) shall be the COR. The COR will follow the methods of surveillance specified in the Government’s QASP. Government personnel will record all surveillance observations and will upload in to PIEE. When an observation indicates defective performance, the COR will require the Contract Manager or representative to initial the observation. The initiating of the observation does not necessarily constitute concurrence with the observation, only acknowledgement that they have been made aware of the defective performance. QUALITY CONTROL: Reference contract clause 52.246-4, Inspection of Services – Fixed Price. The Contractor shall develop, implement, and maintain a comprehensive quality control program that assures compliance with all requirements of the contract and associated contract modifications. The Contractor shall maintain, enforce, and document a Quality Control Plan (QCP). The QCP shall ensure that the Government receives the level of quality that is consistent with the requirements specified in the contract. MANAGEMENT OF DELIVERABLES & REPORTING: The Contractor shall be responsible for creating, maintaining, and disposing of records and reports required by this PWS. When requested by the Government, the Contractor shall provide the original record or a reproducible copy of any such report. All documentation, records, files, schedules, etc., which are the responsibility of the Contractor are the property of the Government and shall remain so upon termination or completion of this contract. The Contractor shall keep these items current. The Contractor shall permit the COR or KO authorized representative access to all records, data, and facilities used in the performance of the anticipated services. PAST PERFORMANCE: The Contractor shall furnish past performance information on previous contracts performed for services relating to this requirement to reflect experience and knowledge of maintaining and repairing commercial-grade kitchen equipment. If possible, the Contractor shall provide tee (3) references on past performance. CONTRACTOR MANPOWER REPORTING APPLICATION (CMRA): The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Utah National Guard via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web addresses: http://www.ecmra.mil or https://cmra.army.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 01 tough September 30. Data shall be reported not later than the first to occur of (1) submission of contractor’s final invoice following conclusion of the period of performance or (2) October 31 of each calendar year. Contractors may direct questions to the help desk at help desk at: http://www.ecmra.mil. SET-ASIDE / FAR REGULATION: Any award resulting from this solicitation will be made using a cascading set-aside order of precedence as follows: In accordance with FAR Subpart 19.502-2 Total Small Business Set-Aside Procedures, any awards under this solicitation will be made on a competitive basis first to small business concerns in accordance with FAR 19.502-2. If there are no acceptable offers from small business concerns, the set-aside shall be withdrawn and the requirement, if still valid, will be made on the basis of full and open competition considering all offers submitted by responsible business concerns. CONTRACT TYPE / EVALUATION CRITERIA: The contract type for this procurement will be firm-fixed price. Award will be based on an all or none basis using lowest price technically acceptable (LPTA) evaluation criteria. For proposals to be technically acceptable, it must meet all the specifications outlined in the PWS and indication of past performance experience relating to maintaining and repairing kitchen equipment or similar commercial equipment. Relevancy and currency will be used for past performance criteria and only a rating of ACCEPTABLE, NOT ACCEPTABLE, OR NEUTRAL will be given on past performance. If a Contractor has no relevant past performance, the Contractor will not be rated Favorably or Unfavorably but will be rated Neutral and not have that count against them. An LPTA quote is one that meets all the technical aspects outlined in this solicitation and statement of work while being the lowest price quote, IAW FAR 15.101-2. SAM REGISTRATION: All offerors must have an active registration in System for Award Management (SAM) at time of award in order to be eligible for contract award. All offerors responding to this solicitation must meet all standards required to conduct business with the Government, including active registration in SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. In addition to providing pricing each quote must include vendor's CAGE/DUNS number, Federal Tax Number, and must include point of contact information. IAW FAR 52.212-1(k), prospective awardees shall be registered and active in the System for Award Management (SAM) prior to award and be in good standing. Prospective offerors may obtain information on registration at WWW.SAM.GOV. IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award and your bid may be disqualified for not being registered and active in SAM.gov. PROPOSALS: All proposals are due to the United States Property and Fiscal Office for Utah Purchasing and Contracting Division no later than 12:00 pm (Mountain) 6 June 2020. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline will be considered non-responsive and will not be considered. PROVISIONS & CLAUSES: The following provisions and clauses are applicable to this solicitation: FAR 52.202-1 – Definitions FAR 52.203-3 – Gratuities FAR 52.204-7 – Central Contractor Registration FAR 52.204-24 – Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment FAR 52.204-26 – Covered Telecommunications Equipment or Services-Representation FAR 52.209-6 – Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarement FAR 52.212-1 – Instructions to Offerors FAR 52.212-3 – Offeror Representations and Certifications-Commercial Items FAR 52.212-3 – Alternate 1 FAR 52.212-4 – Terms and Conditions - Commercial FAR 52.212-5 – Dev - Statutes/Exec Orders FAR 52.217-8 – Option to Extend Services FAR 52.217-9 – Option to Extend the Term of the Contract FAR 52.219-1 (Alt I) – Small Business Program Representation FAR 52.219-6 – Notice of Total Small Business Set-Aside FAR 52.219-8 – Utilization of Small Business Concerns FAR 52.219-14 – Limitations on Subcontracting FAR 52.219-28 – Post-award Small Business Program Representations FAR 52.222-3 – Convict Labor FAR 52.222-21 – Prohibit Segregated Facilities FAR 52.222-22 – Previous Contract and Compliance Reports FAR 52.222-25 – Affirmative Action FAR 52.222-26 – Equal Opportunity FAR 52.222-36 – Affirmative Action for Workers With Disabilities FAR 52.222-40 – Notification of Employees Rights Under the National Labor Relations Act FAR 52.222-50 – Combating trafficking in Persons FAR 52.222-54 – Employment Eligibility Verification FAR 52.223-18 – Encouraging Contractor Policy to Ban Text Messaging While Driving FAR 52.225-23 – Restrictions on Certain Foreign Purchases FAR 52.225-25 – Prohibition on Contracting with Entities in Certain Activities or Transactions Relating to Iran - Representation and Certifications FAR 52.232-1 – Payments FAR 52.232-33 – Payment by Electronic Funds Transfer-Central Contractor Registration FAR 52.233-1 – Disputes FAR 52.233-2 – Service of Protest FAR 52.233-3 – Protest After Award FAR 52.233-4 – Applicable Law for Breach of Contract Claim FAR 52.243-1 – Changes-Fixed Price FAR 52.252-1 – Provisions Incorporated by Reference FAR 52.252-2 – Clauses Incorporated by Reference FAR 52.252-5 – Authorized Deviations in Provisions FAR 52.252-6 – Authorized Deviation in Clauses DFARS 252.203-7000 – Requirement Relating to Compensation of Former DoD Officials DFARS 252.203-7002 – Requirements to Inform Employees of Whistleblower Rights DFARS 252.204-7003 – Control of Government Personnel Work Product DFARS 252.209-7995 – Representation by Corporations Regarding Unpaid Delinquent Tax Liability of a Felony Conviction Under Any Federal Law DFARS 252.212-7000 – Offeror Representations and Certification Required to Implement Status of Executive Orders Applicable to Defense Acquisition of Commercial Items DFARS 252.212-7001 – Dev Terms and Conditions DFARS 252.225-7001 – Buy America Act and Balance of Payments Program DFARS 252.225-7002 – Qualifying Country as Subcontractors DFARS 252.225-7012 – Preference for Certain Domestic Commodities DFARS 252.232-7003 – Electronic Submission of Payment Requests DFARS 252.232-7010 – Levies on Contract Payments DFARS 252.237-7010 – Prohibition of Interrogation of Detainees by Contract Personnel DFARS 252.243-7001 – Pricing of Contract Modifications DFARS 252.243-7002 – Requests for Equitable Adjustment. FAR 52.252-2 – Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make full text available. Also, the full text of a clause may be accessed electronically at: HTTPS://WWW.ACQUISITION.GOV.
W911YP20R0006 Department of the Army Utah Army National Guard
5/6/20, 5:03 PM SOURCES SOUGHT***DFAC COMMERCIAL-GRADE KITCHEN MAINTENANCE & REPAIR
SOLICITATION/SOURCES SOUGHT: W911YP20R0006 AGENCY/OFFICE: Utah National Guard/USPFO PLACE OF PERFORMANCE: Utah Army National Guard/640th Regiment 17800 South Camp Williams Rd, Bluffdale, UT 84065 SUBJECT: DFAC Commercial Kitchen Maintenance and Repairs for 640th RESPONSE DUE DATE: 12:00 PM MST 13 February 2020 CONTRACTING POC: William (Billy) T. Brown III Email: William.t.brown68.civ@mail.mil Phone: 801-432-4273 DESCRIPTION/CAPABILITIES: The United States Property and Fiscal Office (USPFO) for the Utah National Guard is conducting this SOURCES SOUGHT notice to identify local small business vendors, as well as local large business vendors, who possess the capabilities of commercial kitchen equipment maintenance and repair as specified below: The DFAC at Camp Williams requires routine maintenance and servicing to be performed on all types of commercial-grade kitchen equipment, including walk-in/reach-in refrigerators and freezers, ventilation hoods, and serving/cooking/sanitation equipment. This will allow the DFAC to operate smoothly and will limit the requirement for emergency repair of equipment. The DFAC also requires a mechanism to address emergency or unforeseen repairs of equipment. There are no known contract vehicles currently in place. If you believe your company has the knowledge and capability for this requirement, please you’re your capabilities statement to the email below. Additionally, your company must be registered on www.sam.gov as a qualified local small business under the NAICS code 811310 “Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance” (or very similar NAICS code) which has a Small Business Size Standard of $7.5 million (https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf). Local large businesses registered on www.sam.gov are also encouraged to submit their capabilities statement. Your company must also demonstrate you have performed work on similar projects that shows you have the knowledge and expertise of these type of maintenance and repairs. As permitted by FAR Part 10, this is a market research tool being utilized for informational and planning purposes. Your responses will assist the Government in the development of its acquisition strategy for a possible Request for Proposal (RFP), to be issued at a later date, and in determining whether any type of small business set-aside is possible for this procurement or whether full and open competitive procedures should be utilized. If full and open competition is ultimately pursued, responses to this synopsis will be used to aid in establishing small business subcontracting goals. This notice shall not be construed as a RFP or as any commitment or obligation on the part of the Government to issue a solicitation. The Government does not intend to award a contract on the basis of this request, so proposals will not be considered. No reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow-up information requests. Response is strictly voluntary - it is not mandatory to submit a response to this notice to participate in any formal RFP process that may take place in the future. However, it should be noted that information gathered tough this notice may significantly influence our acquisition strategy. All interested parties will be required to respond separately to any solicitations posted as a result of this sources sought notice. SAM REGISTRATION: All firms or individuals responding must meet all standards required to conduct business with the Government, including registration with SAM and WAWF/iRAPT, and be in good standing. All qualified responses will be considered by the Government. Each Capabilities Statement must include vendor's CAGE code, DUNS number, Federal Tax Number, and must include point of contact information. Prospective vendors may obtain information on registration at www.sam.gov. Failure to provide SAM registration may result in your company not being considered. IAW FAR 52.204-7 and DFARS 252.204-7004 Alt A, prospective vendors must be registered in the SAM database prior to award. Lack of SAM registration shall be a determining factor for award. SUBMISSION INSTRUCTIONS: Please provide your Capabilities Statement to the United States Property and Fiscal Office Purchasing and Contracting Division of Utah no later than 12:00 pm (Mountain) 13 February 2020. All submissions should be sent via email to: william.t.brown68.civ@mail.mil. Facsimiles will not be accepted. Questions regarding this requirement may also be directed to this email, with sufficient time to do any research to answer question prior to the closing of this posting. Responses received after the stated deadline may be considered non-responsive and may not be considered. Qualified firms shall submit a statement of interest on company letterhead demonstrating the firm’s qualifications to perform the defined work. Responses must be complete and sufficiently detailed to address the specific information. The documentation shall address, at a minimum, the following: Company Profile to include: Company name and address; Affiliate information: parent company, joint venture partners, and potential teaming partners; Year the firm was established and number of employees; Two points of contact (names, titles, phone numbers and email addresses); DUNS number and CAGE Code, as registered in the System for Award Management (SAM) at http://www.sam.gov/: Small Business designation/status (must correlate with SAM registration): _____ Small business _____ HUBZone _____ WOSB _____ 8(a) _____ VOSB _____ SDVOSB _____ Small Disadvantaged Business Is the firm currently on the Excluded Parties List or has Debt Subject to Offset on www.sam.gov? Documentation of the company’s ability to obtain financing for a contract valued between $100,000.00 to $300,000.00. Bonding capability. List at least 1 current commercial Audio Visual Installation project in the last 5 years of similar size and scope. Include location, POC, agency (if applicable), size, and contract award amount. Additional comments: ___________________________________________________________ This information is true and correct to the best of my knowledge. ________________________________________ ___________________ Signature Date ________________________________________ ___________________ Name
W911YP20R0006 Department of the Army Utah Army National Guard
1/29/20, 5:46 PM