Purchase Order SPMYM218P2411

The General Services Administration (GSA) awarded a firm fixed price purchase order valued at $7,929.33 to Kaufman Company, Inc., doing business as Kaufman Co Inc., located in Norwood, Massachusetts. The contract is to provide a portable, pneumatic circular saw with a 9-inch blade and cutting depth capabilities of 3.25 inches at 90 degrees and 2.125 inches at 45 degrees. The saw must have a minimum power rating of 2 horsepower and be able to connect to a 0.5-inch air hose with an operating air...

This federal contract award is for the supply of a portable, electric reciprocating saw to the Federal Acquisition Service, a civilian agency within the U.S. government. The contract was awarded to Kaufman Company, Inc., a for-profit industrial distributor based in Norwood, Massachusetts, for a firm-fixed-price of $1,137.94. The saw has a maximum overall length of 18.75 inches, a maximum overall height of 10 inches, and operates on 60 VDC with a variable maximum speed of 3,000 RPM. This purchase...

<p>The U.S. Marine Corps awarded a $9,162.75 firm fixed-price purchase order contract to American Power, Inc. for the procurement of portable, pneumatic circular saws. The contract was awarded on March 17, 2005 with a completion date of April 19, 2005. This was not a set-aside contract. No additional subcontractors were mentioned in the provided information.</p>

<p>This federal contract award is for the purchase of a portable, pneumatic circular saw. The contract was awarded to American Power, Inc. by the U.S. Marine Corps, a defense agency, in the amount of $3,206.96 under a firm fixed price purchase order. The award has no set-aside designation and was issued on July 6, 2005, with a completion date of August 8, 2005. The place of performance is Washington, USA.</p>

<p>The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at $499 to provide cordless circular saws. The saws will feature a 7-1/4 inch blade, 50 degree bevel capacity, and depths of cut of 1-7/8 inches at 45 degrees and 90 degrees. Performance will occur in Gainesville, Georgia over a one-month period concluding in mid-September. The award was set aside for total small business participation.</p>

The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a purchase order contract valued at $4,539.10 to provide a pneumatic, portable disk sander for use at a facility located in Gainesville, Georgia. The sander will feature a motor-only drive type, right angle handle, body grip throttle, lever operating at 90 PSI air pressure and 18 CFM consumption through a 1/4 inch NPT inlet. It will have a no load speed of 10,000 RPM. The firm fixed price contract runs...

This is a $7,386.30 fixed-price with economic price adjustment contract awarded by the Federal Acquisition Service to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The contract is a call order under the RC2 Blanket Purchase Agreement and does not have a set-aside designation, indicating open market competition. The contract is for the procurement of a pneumatic, portable, 90-degree angle disc sander with a 3/4 HP motor and 7-inch minimum pad size....

This federal contract award is for the purchase of a GRINDER, PNEUMATIC from the prime contractor B &amp; H International LLC, a minority-owned and woman-owned small business. The $16,108.20 firm-fixed price contract was awarded by the Naval Sea Systems Command (NAVSEA), a defense agency, under a total small business set-aside. The pneumatic grinder being purchased is a Chicago Pneumatic model CP3750-085AB7, which has a 2.2 HP capacity and 8,500 RPM free speed. This equipment will be delivered...

This federal contract award, valued at $2,585.00, was issued by the Federal Acquisition Service (FAS) to May Tool Inc., a self-certified small disadvantaged, woman-owned, and Department of Transportation (DOT) certified Disadvantaged Business Enterprise (DBE) based in Paramount, California. The contract is for the provision of a portable, gasoline-powered circular saw with specific technical requirements, including a 6-inch cutting depth, 16-inch blade capacity, 4,700 RPM speed, and 8 HP (+/-...

This delivery order from the General Services Administration (GSA) Federal Acquisition Service awarded Wright Tool Company, LLC a fixed-price contract with economic price adjustment valued at $815.64. Under the company's Multiple Award Schedule contract vehicle, Wright Tool will provide a portable, electric reciprocating saw measuring approximately 14.5 inches in length with a 1.125 inch stroke length and variable speed rate of 0 to 2,900 strokes per minute. The saw will have a closed D handle...