Purchase Order SPMYM215M2613

This is a federal contract awarded by the General Services Administration (GSA) to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The contract is for the delivery of a torque multiplier tool, with a maximum overall length of 19 inches, height of 7-43/64 inches, and width of 13 inches. The tool has a 3/4-inch square drive on both ends and a rated torque capacity of 12,000 foot-pounds, with a gear ratio of 10.7:1 and a minimum hardness rating of 38...

The General Services Administration (GSA) awarded Kaufman Company, Inc. a $1,778.77 firm fixed price purchase order to deliver a torque multiplier. The torque multiplier will have an overall length of 25 inches, a square drive size of 3/4 inch, gear ratios of 4 to 1, and a torque capacity of 2,000 foot-pounds. Materials will be steel and coatings will be chrome. Performance will occur in Norwood, Massachusetts over a period of approximately 3 months from November 2023 through February 2024. No...

This is a $38,800.00 firm fixed-price purchase order awarded by the U.S. Coast Guard to Hydratight Operations Inc., a division of Actuant Corporation's Gardner Bender business, for the supply of one Torque Multiplier to support the HC-27J Aircraft program. The contract has no set-aside designation and is expected to be completed by December 29, 2023. Hydratight Operations is an experienced manufacturer and supplier of industrial tools and equipment to various defense agencies, including the...

K5 Defense LLC has been awarded a firm fixed price purchase order by the General Services Administration Federal Acquisition Service for the delivery of a torque multiplier. The $21,096 contract calls for K5 Defense to provide a torque multiplier measuring 19 inches in length with a maximum rated torque capacity of 12,000 foot-pounds, 7.675 inches in height, and 13 inches in maximum width. The torque multiplier will have a 3/4 inch nominal input drive on both ends, an 11:1 gear ratio, and a...

Kaufman Company, Inc. of Norwood, Massachusetts has been awarded a firm fixed price purchase order valued at three thousand six hundred fifty four dollars and thirty cents ($3,654.30) by the U.S. General Services Administration (GSA) Federal Acquisition Service. The award is for the delivery of a manual torque multiplier wrench with an overall length of twenty inches, square drive sizes of one half and one inch, and a torque capacity range of two hundred twenty to two thousand two hundred...

This contract was awarded by the U.S. government to Cooper Industries Inc. for the delivery of a Wrench Assembly Torque Multiplier. The contract has a total ceiling value of $11,656.80 and is a Delivery Order under a larger contract vehicle. The contract does not have a set-aside designation. The contract was awarded on April 4, 2005 with an ultimate completion date of May 22, 2005. The place of performance is South Carolina, USA. No additional subcontractors are mentioned in the provided...

The General Services Administration awarded a $605.62 delivery order to Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC doing business as Snap-On Industrial, under the company's Multiple Award Schedule contract with GSA. The order is for the delivery of a torque wrench with an overall length of 20 inches, input capacity of 200 foot-pounds, output capacity of 1,200 foot-pounds, and square drive sizes of 1/2 inch and 3/4 inch. The wrench has a gear ratio of 6.3:1 and torque...

This firm fixed price delivery order for $683 was awarded by GSA Federal Acquisition Service to Snap-On Industrial, a division of Idsc Holdings LLC, for the delivery of a torque wrench. The wrench has an overall length of 20 inches, input capacity of 200 foot-pounds, and output capacity of 1,200 foot-pounds, with square drive sizes of 1/2 inch and 3/4 inch on its first and second ends respectively. It has a gear ratio of 6.3:1 and torque ratio of 6:1. Place of performance will be Kenosha, WI....

This delivery order, awarded by GSA Federal Acquisition Service, is for the provision of a torque wrench with an overall length of 20 inches, input capacity of 200 foot-pounds, output capacity of 1,200 foot-pounds, and a gear ratio of 6.3:1 providing a torque ratio of 6:1. The prime contractor is Snap-On Industrial, a division of Idsc Holdings, LLC, which is a subsidiary of Snap-On Incorporated. Performance will take place in Kenosha, Wisconsin. The potential value of this firm fixed price order...

The U.S. General Services Administration (GSA) Federal Acquisition Service has awarded a fixed-price contract with economic price adjustment to W.W. Grainger, Inc. Government Sales Division, doing business as Grainger, for a Torque Multiplier 1 18.5 inch long handle. The contract was awarded on March 26, 2024, with a potential value of $2,061.32, and a completion date of April 2, 2024. This order was placed against Grainger's Multiple Award Schedule (MAS) contract, which is an indefinite...