Purchase Order SPE8E523P0465

Abrasive-Tool Corp., doing business as Gauss Sales Co., has been awarded a $3,852.76 firm fixed-price call against the Department of the Army Materiel Command TACOM Life Cycle Management Command's indefinite-delivery/indefinite-quantity multiple award contract for wheel assembly Federal Supply Classification 5345. The small business set-aside contract calls for the delivery of wheel assembly National Stock Number 00X146110 to be completed by June 2, 2023 for use in the agency's vehicle fleet...

GSA awarded a firm fixed-price purchase order valued at approximately $98 to F&M Micro Products Inc. to deliver abrasive aluminum oxide wheels measuring 0.250 inch thick with a 0.625-11 arbor hole and 4.500 inch diameter. Performance will occur in Lake Balboa, California under a three-month period of performance concluding in October 2023. The prime contractor will fulfill the agency's requirement for the specified wheel dimensions and composition to support GSA operations. No additional...

This federal contract award, W911PT21A0001|W911PT23F0218, was issued by the TACOM Life Cycle Management Command (TACOM LCMC), a component of the U.S. Army, to Abrasive-Tool Company LLC, operating under the trade name Gauss Sales Co. The $6,710.00 firm-fixed-price contract is for the procurement of 6-inch by 3-inch wheels, National Stock Number 00X139400, with no set-aside designation. Abrasive-Tool Company LLC is a small business that has a significant Indefinite Delivery Vehicle (IDV) Blanket...

Giga, Inc. has been awarded a firm fixed price purchase order valued at fifty-five dollars by the General Services Administration (GSA) Federal Acquisition Service to deliver one WHEEL, ABRASIVE GRINDING, ALUMINUM OXIDE, DEPRESSED CENTER HUB, measuring 0.250 inch thick with a 625 inch 11-thread arbor hole and 7.00 inch in diameter. Performance will occur in Macon, Georgia. No set-aside designation was applied to this procurement for a single abrasive grinding wheel to support GSA operations.

The General Services Administration Federal Acquisition Service awarded Kaufman Company, Inc. a purchase order valued at $58.77 to provide hand-held abrasive wheels for cleaning. Under this firm fixed price contract, Kaufman Co Inc. will deliver Dresser, Abrasive Wheels measuring 2-3/8 inches in diameter and 0.93 inches in face width, with an overall length of 13 inches and made of steel. The wheels will be used to clean abrasive wheels up to 3 inches wide. Performance will occur in Norwood,...

The General Services Administration awarded Purchase Order number 5345013609965 to F&M Micro Products Inc. for the delivery of five wheel, flap, abrasive, zirconia-aluminum oxide grinding discs valued at $256.40. The firm fixed price order calls for 60 grit depressed center discs with angled design, measuring 7.00 inches in diameter with a .875 inch arbor hole and cloth backing. Performance will occur in Lake Balboa, California over a period of one month concluding in mid-December. The award...

This is a $21,033.10 firm fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) to Kampi Components Co Inc., a small business subchapter S corporation located in Fairless Hills, Pennsylvania. The contract is for the supply of abrasive wheel sets, identified by the product description code 8511125162. There is no set-aside designation for this award. Kampi Components Co Inc. has an established history as a prime and subcontractor for the U.S. Department of Defense,...

This is a firm fixed-price purchase order awarded by the General Services Administration's (GSA) Federal Acquisition Service to F & M Micro Products Inc., a small disadvantaged business located in Lake Balboa, California. The $8,898.80 contract is for the delivery of abrasive wheels meeting specific technical requirements. The award does not carry any set-aside designation. F & M Micro Products is a supplier of diverse workplace infrastructure and operations support items to federal...

This federal contract award is for the delivery of hand abrasive wheels to be used for steel cutting and grinding. The prime contractor, Idsc Holdings LLC Snap-On Industrial, a division of Idsc Holdings LLC, will provide Dresser abrasive wheels with specifications including an overall length of 8.5 inches, face width of 0.45 inches, diameter of 1.25 inches, and a grinding wheel diameter of 10 inches. The wheels will be used to cut steel materials. The contracting vehicle is the General...

The Defense Logistics Agency Troop Support awarded a $440 purchase order to Grier Abrasive Co., Inc. for wheel abrasives. Grier Abrasive will deliver item 8510132576 under firm fixed price terms, with performance taking place in South Holland, Illinois between September 2023 and February 2024. No subcontractors or set aside designations were indicated. The Defense Logistics Agency Troop Support supports military readiness by procuring and providing supplies in key areas such as construction...