Purchase Order SP470224P0016
Award Date
2/12/24
Potential Completion Date
7/31/25
Potential Value
$107K
Federal Agency
Land and Maritime
Awardee
Innovatest USA Co
Ultimate Awardee
Not listed
NAICS Category
334516 - Analytical Laboratory Instrument Manufacturing
PSC Category
6640 - Laboratory Equipment And Supplies
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Columbus, OH 43218, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This federal contract award, valued at $102,179.00, was issued by the U.S. Army Tank-Automotive and Armaments Command (TACOM) to Innovatest USA Co, a for-profit corporate entity. The contract is for the procurement of a Micro-/Macro-Hardness Tester to support the Ground Vehicle Materials Engineering's Materials Testing Lab at the Ground Vehicle Systems Center (GVSC). The tester must meet specific technical requirements, including a load range from 0.3 kg to 3,000 kg, the ability to conduct tests...
This is a firm fixed-price purchase order awarded by the Naval Sea Systems Command (NAVSEA), a defense agency, to Illinois Tool Works Inc. (ITW) Buehler Division for a Wilson RH2150 Hardness Tester and related accessories. The contract has a total value of $34,536.00 and an ultimate completion date of April 3, 2025. The original solicitation was issued as a 100% total small business set-aside. The hardness tester and associated equipment, such as a t-slot table, gooseneck indenter, and...
This firm fixed-price purchase order was awarded by the National Institute of Standards and Technology (NIST), a civilian federal agency, to LTF S.P.A.'s Metrology Division, a for-profit manufacturing company located in Antegnate, Italy. The $234,062.10 contract is for the delivery of a primary hardness standardization machine capable of Rockwell, Brinell, and Vickers testing. The contract has a completion date of September 29, 2018 and was awarded on September 19, 2016. This contract did not...
This is a $115,130.00 firm fixed price purchase order awarded by the National Institute of Standards and Technology (NIST), a civilian agency within the U.S. Department of Commerce, to Nanovea, Inc., a small business manufacturer, for the provision of one instrumented micro indenter, one module for acoustic sensing, and one module for micro friction sensor. The contract is set aside for small businesses. The micro indenter is required to measure the hardness and elastic modulus of various...
The U.S. Department of the Air Force Materiel Command Air Force Sustainment Center awarded a $103,635.00 firm-fixed-price contract to Zwickroell, LP for the delivery of a DuraScan 70 G5 Micro Hardness Tester. The contract includes installation, training, and maintenance services, with a period of performance from March 2025 to March 2029. This award resulted from a sole source procurement (Solicitation FA857125Q0039) that was not set aside for any specific business type. Zwickroell, LP is a...
This is a $85,995.00 firm fixed-price purchase order awarded by the Ogden Air Logistics Complex, a Defense agency, to Laboratory Testing Inc., a for-profit Subchapter S Corporation, to provide one Fracture Technology Associates Direct Current Potential Difference (DCPD) Crack Measurement System for the Rapid Innovation Center at Hill Air Force Base in Utah. The purchase order has a completion date of July 20, 2023. This requirement was originally posted as a solicitation with no set-aside...
This federal contract award, with an ID of SPMYM324P3012, is for the procurement of a Rockwell Hardness Tester by the Naval Sea Systems Command (NAVSEA), a defense agency. The $34,018.00 firm-fixed price purchase order was awarded on September 17, 2024 to Seventh Genius LLC, doing business as DC Supplies, a minority-owned, woman-owned small business. The tester must be capable of performing standard and superficial Rockwell scales, have a vertical testing capacity of at least 14 inches, and...
This federal contract award, valued at $174,049.51, was issued by the Oklahoma City Air Logistics Complex, a defense agency, to Illinois Tool Works Inc. (ITW) for the preventive maintenance, repair, and annual calibration of hardness and tensile testing equipment for a Reform Blade Tip Grinder. The contract is a firm fixed-price purchase order with an ultimate completion date of October 31, 2022. ITW, a global industrial manufacturing company, primarily supplies the federal government with...
This firm fixed-price purchase order, awarded to Illinois Tool Works Inc. (ITW) through its Instron division, provides preventative and remedial maintenance and calibration services for various hardness and tensile testing equipment located at Tinker Air Force Base in Oklahoma City, Oklahoma. The contract has a ceiling value of $160,150.00 and a performance period ending on October 31, 2027. The award was made as a sole-source contract, without any set-aside designations, to ITW based on the...
This is a firm fixed-price purchase order contract awarded by the Bureau of Naval Personnel (BUPERS), a component of the Department of the Navy, to Illinois Tool Works Inc.'s Buehler division for the procurement of various Rockwell hardness testers. The total ceiling value of the contract is $115,640.70, with a performance period ending on August 15, 2024. The contract was not set aside for any specific business category. It was awarded under the simplified acquisition procedures of FAR Part 13,...