100%
Skip to main content
Platform
GovTribe AI
AI-powered insights to accelerate your government contracting workflow.
MCP Server
Connect GovTribe to your AI tools.
Beacon
Find and connect with key government decision-makers.
Profiles
Federal Agencies
Federal Contract Vehicles
Federal Grant Programs
Major Defense Acquisition Programs
NAICS Categories
PSC Categories
States
Jurisdictions
NIGP Categories
UNSPSC Categories
Vendors
Enrichment By Clearbit
Reports
New Entrants
Funding Analysis
Vehicle Analysis
Groups
Capture
Pipelines
Pursuits
Alerts
Teaming
Data
Awards
Forecasts
Federal Opportunities
State & Local Opportunities
Files
Prime and Subcontractors
Activity
Search
Exports
Solutions
Use Case
Opportunity Identification
Capture Management
Competitive Intelligence
Teaming & Partner Identification
Proposal Management
Strategic Leadership
Go-to-Market Strategy
Industry
Federal Contractors
State & Local Contractors
Grant Seekers
Government Agencies
Research & Consulting
Pricing
More
About Us
Features
Get A Demo
Sign Up
Blog
User Guide
Data Model
GovTribe for Agents
Login
Contact sales
Try for free
Login
Contact sales
Try for free
All Federal Contract Awards
Purchase Order SA706508M0005
Award Date
8/5/08
Potential Completion Date
9/30/08
Potential Value
$27K
Overview
Contacts
Activity
1
Transactions
1
Subawards
Opportunity Stack
Similar Awards
Federal Agency
Document Services
Awardee
International Paper Company QMUEK5TEG4D7
Ultimate Awardee
Not listed
NAICS Category
423830 - Industrial Machinery and Equipment Merchant Wholesalers
PSC Category
3610 - Printing, Duplicating, And Bookbinding Equipment
Federal Contract Vehicle
Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Full and Open Competition
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Silverdale, WA, USA
Solicitation Procedures
Negotiated Proposal / Quote
Number Of Offers Received
3
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Description
INDUSTRIAL PAPER CUTTER
Posted 8/5/08
5
1
Name
Description
Solicitation Number
FederalAgency
Type
PostedDate
Industrial Paper Cutter
Added: Jul 22, 2008 4:21 pm This requirement is for two paper cutters at the locations listed below: The government reserves the right to make multiple awards. Item # 1. SPECIFICATION/JUSTIFICATION FOR ACQUISITION OF 30 HEAVY DUTY INDUSTRIAL PAPER CUTTER FOR DAPS HILL AFB, UTAH INTRODUCTION: DAPS Bangor has received authorization and funds to replace the large industrial Polar Paper Cutter, Model 92EMC, serial number 5116351, at the DAPS Hill AFB facility. Due to the nature of the current workload, as well as anticipated future workload, the replacement paper cutter should be of a substantial enough structure to perform the required operations. TRADE-IN CONSIDERATION: DAPS HQ Business Division has mandated that we seek trade-in value on currently used equipment wherever and whenever possible. This is in accordance with DAPSI 4161.1 (paras. 4.6, 4.7 and 5. DRAFT). The item to be traded-in is: Polar Paper Cutter, 37 Size, Model 92EMC, serial number 5116351, purchase price was $32,545, and it is listed as being 17 years old. We estimate the trade-in value as being between 1% to 3%, or $325-$975 (negotiable). Vendor would have to remove item from DAPS facility, within 30 days of the installation of the new paper cutter, or sooner as negotiated. SPECIFICATIONS - Cutting Width must be at least 30 in order to accommodate paper stock and printed engineering drawings (w/aprons) requiring final trim - Heavy Duty, hydraulic industrial floor model paper cutter, so that varying weights and sized of paper stock can be easily cut to size; constructed of steel and/or cast iron - Clamp opening must be 4 so that a ream (500 sheets) of our heaviest stock, index can be cut at once to maximize efficiency - Paper cutter should have programming capability, in order to pre-program cuts to increase efficiency; alpha-numeric keypad, data screen, and 999 preset programming cutting memory would be sufficient. The cutting to size of various technical manuals, as smoothly and quickly as possible is required - Paper cutter should have a pre-clamp function which allows the operator to clamp paper prior to beginning the cut. As a safety feature, the pre-clamp can be foot operated, and the cutting blade would be a two hand on button operation, so that both hands and feet are away from the blade; pre-clamp should also be adjustable, so that operator can make adjustments depending on stock being cut - Work surface on paper cutter should be lighted, so that operator can position work appropriately, and improve visibility for safe operations of cutter - Backguage should be variable speed, so that operator can better control cutting, and removal of excess cut-away trim - SAFETY FEATURE: Because of the inherent danger in operating this type of equipment, a standard safety feature, electric eye or beam should be installed on the paper cutter between the operator and the cutting blade, so that if the beam is interrupted while a cut is being made, the blade and clamp will return to the Up position - For efficiency, paper cutter should have some passive or active form of notification for the operator to indicate when the blade should be changed and the cutter is in need of lubrication; this is for higher efficiency, waste avoidance and protection of the equipment (avoid overheating) - Since we have pre-existing equipment and electrical power, new paper cutter should be 3-phase, 60 Hz, 208/220 Volt, 25 Amp, UL Listed, with a 5 HP motor - Paper cutter should come with at least one blade, cutting sticks, and an operators manual - Set up and operator training is also required DELIVER ITEM TO: Document Automation & Production Service (DAPS) 6011 Gum Lane, Bldg. 1229PS Hill AFB, UT 84056-5826 POC At DAPS Hill AFB: Mr. Randy Knight, Supervisor Phone: (801) 777-7707 Item #2 SPECIFICATION/JUSTIFICATION FOR ACQUISITION OF 30 HEAVY DUTY INDUSTRIAL PAPER CUTTER FOR DAPS USAF ACADEMY, CO. INTRODUCTION: DAPS Bangor has received authorization and funds to replace the large industrial Polar Paper Cutter, Model 92EMC, serial number 5211376, at the DAPS USAF Academy facility. Due to the nature of the current workload, as well as anticipated future workload, the replacement paper cutter should be of a substantial enough structure to perform the required operations. TRADE-IN CONSIDERATION: DAPS HQ Business Division has mandated that we seek trade-in value on currently used equipment wherever and whenever possible. This is in accordance with DAPSI 4161.1 (paras. 4.6, 4.7 and 5. DRAFT). The item to be traded-in is: Polar Paper Cutter, 37 Size, Model 92EMC, serial number 5211376, purchase price was $27,473, and it is listed as being 24 years old. We estimate the trade-in value as being between 1% to 3%, or $275-$825 (negotiable). Vendor would have to remove item from DAPS facility, within 30 days of the installation of the new paper cutter, or sooner as negotiated. SPECIFICATIONS - Cutting Width must be at least 30 in order to accommodate paper stock and printed engineering drawings (w/aprons) requiring final trim - Heavy Duty, hydraulic industrial floor model paper cutter, so that varying weights and sized of paper stock can be easily cut to size; constructed of steel and/or cast iron - Clamp opening must be 4 so that a ream (500 sheets) of our heaviest stock, index can be cut at once to maximize efficiency - Paper cutter should have programming capability, in order to pre-program cuts to increase efficiency; alpha-numeric keypad, data screen, and 999 preset programming cutting memory would be sufficient. The cutting to size of various technical manuals, as smoothly and quickly as possible is required. - Paper cutter should have a pre-clamp function which allows the operator to clamp paper prior to beginning the cut. As a safety feature, the pre-clamp can be foot operated, and the cutting blade would be a two hand on button operation, so that both hands and feet are away from the blade; pre-clamp should also be adjustable, so that operator can make adjustments depending on stock being cut - Work surface on paper cutter should be lighted, so that operator can position work appropriately, and improve visibility for safe operations of cutter - Backguage should be variable speed, so that operator can better control cutting, and removal of excess cut-away trim - SAFETY FEATURE: Because of the inherent danger in operating this type of equipment, a standard safety feature, electric eye or beam should be installed on the paper cutter between the operator and the cutting blade, so that if the beam is interrupted while a cut is being made, the blade and clamp will return to the Up position - For efficiency, paper cutter should have some passive or active form of notification for the operator to indicate when the blade should be changed and the cutter is in need of lubrication; this is for higher efficiency, waste avoidance and protection of the equipment (avoid overheating) - Since we have pre-existing equipment and electrical power, new paper cutter should be 3-phase, 60 Hz, 208/220 Volt, 25 Amp, UL Listed, with a 5 HP motor - Paper cutter should come with at least one blade, cutting sticks, and an operators manual - Set up and operator training is also required DELIVER ITEM TO: Document Automation & Production Service (DAPS) 8122 Edgerton Drive USAF Academy, CO 80840 POC At DAPS USAF Academy : Mr. Earl Rains, Supervisor Phone: (719) 333-2350 FINAL COMMENTS: Market research showed that the Challenge Machinery and Polar-Mohave items that can satisfy the aforementioned specifications; neither holds a GSA Schedule (GSC 36, SIN 51-212). Suggest small business set-aside, open market purchase.
SA7065-08-Q-0009
Defense Logistics Agency
Award Notice 1/1
7/22/08, 4:21 PM
5
1
Mod #
Description
ReasonForModification
Federal Obligation
Date
Not listed
INDUSTRIAL PAPER CUTTER
Not listed
$27.1k
8/5/08