Purchase Order N6893624P0411

Award Date 9/16/24
Potential Completion Date 4/21/25
Potential Value $477K
Ultimate Awardee
Not listed
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Ridgecrest, CA 93555, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
3
Legislative Mandate
Service Contract Act
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The Department of the Navy Naval Sea Systems Command awarded a $129,840.00 firm fixed-price purchase order to Cuming-Lehman Chambers, Inc. to provide ceiling patch, repair, and replacement services for an anechoic chamber located in Chambersburg, PA. This sole-source procurement was made under Federal Acquisition Regulation 6.302-1, as only Cuming-Lehman Chambers could satisfy the agency's requirements. The work includes removing and replacing the chamber's ceiling, absorber material, patch...
The U.S. Naval Research Laboratory awarded a $576,595 firm-fixed-price purchase order to AP Americas Inc. (a foreign-owned, for-profit corporation) to refurbish an existing anechoic chamber located in Washington, D.C. The refurbishment will redesign the absorber layout and replace absorber materials throughout the chamber and control rooms to support testing of modern 5G wireless networks between 500MHz and 60GHz. The contract has no set-aside designation and the period of performance is 29...
The Department of the Navy Information Warfare Systems Command awarded a firm fixed-price purchase order to TDK RF Solutions Inc., a for-profit manufacturer of electronic components and test systems, for the delivery of an Anechoic Chamber. The contract, which was not set aside, had a potential value of $518,000.00 and a completion date of May 31, 2019. TDK RF Solutions has previously held prime contracts with various government agencies, including the Department of the Navy, Army, and NASA, for...
The U.S. Department of the Air Force Materiel Command awarded a firm fixed price purchase order contract worth $459,200.00 to Cuming Microwave Corporation, a manufacturer of goods, for the delivery of EW RADAR ABSORBANT MATERIAL (RAM). The contract has a completion date of December 31, 2019 and does not have a set-aside designation. Cuming Microwave Corporation is a global supplier of microwave, RF, and radar absorbing materials, and has provided various goods such as seals and boot kits to...
This $1,974,200.00 firm-fixed-price purchase order contract was awarded by the U.S. Army Materiel Command Army Contracting Command to Ets-Lindgren Inc., a subsidiary of Esco Technologies Inc., to provide radar-absorbent materials (RAM) for the Army Combat Capabilities Development Command (DEVCOM) Analysis Center (DAC) at White Sands, New Mexico. The contract requires the installation of extra-high microwave absorbers and custom-cut perimeter walkway absorbers to fill a 94-foot by 62-foot...
This firm-fixed-price purchase order was awarded by the Naval Sea Systems Command (NAVSEA) to Arc Technologies LLC, a subsidiary of Hexcel Corp, for the procurement of two radar absorbing material (RAM) products, part numbers 11685 Rev A and 11687-1 Rev A. The award, valued at $54,003.50, was made on a sole-source basis without a small business set-aside. The RAM products are required to repair and replace existing materials currently in use. As the incumbent supplier, Arc Technologies has the...
This is a firm-fixed-price delivery order contract awarded by the Defense Logistics Agency (DLA) Land and Maritime to Raytheon Company, doing business as Raytheon, a major global aerospace and defense contractor. The contract has a ceiling value of $1,961.10 and an ultimate completion date of July 12, 2024. It is not designated as a set-aside contract. The contract provides for the delivery of radio frequency absorbers, which are electronic components used in military systems and equipment. This...
This federal contract award, valued at $6,870,000.00, was issued by the U.S. Army Contracting Command Redstone Arsenal (ACC Redstone) to Nsi-Mi Technologies Inc., a subsidiary of Ametek Inc. The contract is for the fabrication, delivery, and installation of an Anechoic Near Field Test Chamber at the Letterkenny Army Depot. The equipment includes an anechoic chamber, fire suppression system, antennas, radio frequency subsystem, scanner subsystem, and measurement station. The contract is a Firm...
This is a firm fixed-price purchase order awarded by the Air Force Materiel Command to Cuming Microwave Corporation, a global supplier of microwave and RF absorber materials, for $500,000. The contract is for the delivery of "EW MEDIUM POWER RAM", which likely refers to electronic warfare-related radar absorbing materials. Cuming Microwave has previously served as a subcontractor to prime contractors like Lockheed Martin, Raytheon, and Serco, providing components like seals, boots, and...
This is a $231,391.00 Firm Fixed Price contract awarded by the Naval Sea Systems Command (NAVSEA) to AP Americas Inc. Albatross Projects Usa, Inc. Division, a foreign-owned, for-profit small business. The contract is for the provision of an Anechoic Test Chamber, which is a specialized test environment used for electromagnetic compatibility (EMC), antenna testing, and high-frequency technology applications. AP Americas Inc. has demonstrated experience in designing, manufacturing, installing,...

This is a federal contract awarded by the Naval Air Warfare Center (NAWC) to Cuming-Lehman Chambers, Inc. for the removal and replacement of an existing Radio Frequency (RF) Anechoic Absorber Chamber's Radiation-Absorbent Material (RAM) at their facility in Ridgecrest, California. The contract has a ceiling value of $476,872.00 and is a firm fixed-price purchase order with an ultimate completion date of April 21, 2025. The contract does not have a set-aside designation. The key requirements include the removal of the existing RAM, cleaning and preparing the surfaces, installing new 12-inch pyramidal RAM on the ceiling and 18-inch pyramidal RAM on the walls, and building an open walkway with entry steps. The contractor must ensure that the materials meet all the fire retardancy requirements and that the quality control of the absorber manufacture meets ISO-9001 standards.

Generated 12/16/24, 2:38 PM