Purchase Order N6600120P6119

Award Date 3/24/20
Potential Completion Date 7/10/20
Potential Value $94K
Funding Federal Agency
Washington Headquarters Service
Ultimate Awardee
Not listed
Set-Aside Type
Total Small Business
Federal Contract Vehicle
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Temple, PA 19560, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
3
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a $74,052 firm fixed-price purchase order awarded by the Defense Logistics Agency (DLA) Land and Maritime to Flightfab, Inc., a small business manufacturer based in Westminster, Maryland. The contract is for the production of vertical cam assemblies, a component likely used in defense systems or logistics equipment. This award is part of a larger set of indefinite delivery contracts Flightfab holds with the Navy and DLA, worth up to $56 million, for the supply of specialized defense...
This is a firm fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) Land and Maritime to Flightfab, Inc., a for-profit manufacturer of defense hardware based in Westminster, Maryland. The contract, valued at $1,699.98, is for the delivery of a rigid shaft coupling (NSN 8510817399) by December 10, 2024. Flightfab, Inc. operates under the doing business as (DBA) name of FFI Aerospace & Defense and is registered in the System for Award Management (SAM) through...
This is a firm fixed-price purchase order awarded by the Naval Sea Systems Command (NAVSEA), a defense agency, to United Titanium, Inc., a veteran-owned small business manufacturer based in Wooster, Ohio. The contract is for the delivery of 264 socket flat countersunk head cap screws made of titanium, which are required by the Portsmouth Naval Shipyard. The total contract value is $11,082.72. This procurement was set aside for total small business participation. The solicitation required vendors...
This is a firm fixed-price purchase order contract awarded by the U.S. Department of Defense's Defense Logistics Agency (DLA) Aviation and DLA Land and Maritime to Fabrication Specialty Inc., a veteran-owned small business manufacturer located in Granbury, Texas. The contract is for the delivery of various hardware components, fasteners, and industrial parts, including screws, bolts, nuts, washers, rivets, pins, gaskets, and turbine engine lock rings, which are essential for military equipment...
This federal contract award, valued at $1,500.00, was made by the Defense Logistics Agency (DLA) to Fabrication Specialty Inc., a veteran-owned small business manufacturer located in Granbury, Texas. The contract is a firm fixed-price purchase order for the delivery of various hardware components, including nuts, bolts, screws, washers, rivets, pins, gaskets, turbine engine lock rings, strike and catch hardware, and other attachment parts. The award is not set aside for any small business...
This is a $3,568.25 firm fixed-price purchase order awarded by the Defense Logistics Agency (DLA) Aviation to Military & Commercial Fabricators, Inc., a small business manufacturer based in Pennsylvania. The contract is for the production of various aviation structural components and support equipment, including balance weights, spacers, sleeves, maintenance platforms, bushings, seat rails, and other specialized hardware. The contract has no set-aside designation and has an ultimate...
This is a federal purchase order contract awarded to Fabrication Specialty Inc., a veteran-owned small business manufacturer based in Granbury, Texas. The $19,960.00 firm fixed-price contract was awarded on January 31, 2025 by the U.S. Department of Defense's Aviation agency for the delivery of various hardware components, such as nuts, bolts, screws, washers, rivets, pins, gaskets, and turbine engine lock rings, to support aircraft maintenance and equipment readiness. Fabrication Specialty Inc....
This is a firm fixed-price purchase order awarded by the Naval Sea Systems Command (NAVSEA), a defense agency, to United Titanium, Inc., a veteran-owned small business manufacturer based in Wooster, Ohio. The $20,394.80 contract is for the delivery of titanium pipe and tube, a critical component used in the maintenance and repair of aircraft, naval vessels, vehicles, and other military equipment. The contract has a total small business set-aside, indicating it was specifically reserved for small...
This is a firm fixed-price purchase order contract awarded by the Naval Sea Systems Command (NAVSEA) to United Titanium, Inc., a veteran-owned small business manufacturer based in Wooster, Ohio. The contract is for $378,465.00 and covers a range of machining services, specifically the production of specialized titanium hardware and precision components for defense and aerospace applications. United Titanium has an extensive history of providing these types of products to various Department of...
This is a $1,728.00 firm fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) Aviation to United Titanium, Inc., a veteran-owned small business manufacturer based in Wooster, Ohio. The contract is for the delivery of 8510987145 SCREW,CAP,SOCKET HE, with a period of performance through February 18, 2025. United Titanium specializes in the production and supply of titanium hardware and components critical for maintaining and repairing U.S. military aircraft, naval...

This is a $94,000.00 firm fixed price purchase order issued by the Department of Defense's Washington Headquarters Service to the small business contractor Fabricon, Inc., doing business as Trimmaster. The contract is for the delivery of 4 titanium 6AL-4V (Grade 5) actuator shafts in accordance with the technical specifications provided in the solicitation. The contract was awarded under a total small business set-aside. Fabricon, Inc. is a veteran-owned contract manufacturing job shop in Berks County, Pennsylvania that provides services such as CNC machining, welding, waterjet cutting, and sheet metal fabrication. In addition to this prime contract, the company has also served as a subcontractor on federal contracts, providing weldment components for prime contractors.

Generated 4/1/25, 5:13 PM