Purchase Order N4215819PS098

The Department of the Army Materiel Command TACOM Life Cycle Management Command awarded a $480,000 firm fixed price contract to Machine Tools USA Inc. for a waterjet cutting machine. The machine must have a minimum cutting area of 19 feet 6 inches by 9 feet 6 inches, be powered by an intensifier pump of at least 100 horsepower, and have an abrasive bulk feeder holding 900 pounds. It will be delivered to and installed at Anniston Army Depot in Alabama within 210 days of the May 25, 2022 award...

This federal contract award is for the purchase of a computer numerically controlled (CNC) plasma arc cutting machine by the TACOM Life Cycle Management Command, a subordinate command of the U.S. Army Materiel Command responsible for ground vehicle and armaments lifecycle management. The $210,000 firm-fixed-price purchase order was awarded to Machitech Automation LLC, a self-certified small disadvantaged business, for delivery, installation, personnel training, and documentation. This contract...

The Department of the Air Force Air Mobility Command awarded a $293,462 purchase order to Machine Tools USA Inc. of Hudgins, Virginia for a waterjet cutting center. This award was made under a total small business set-aside solicitation seeking quotes for an abrasive waterjet cutting machine with a 10'6" x 5'5" table and 8'4" x 4'7" cutting area to be installed at MacDill Air Force Base in support of Air Force operations. As the prime contractor, Machine Tools USA Inc. will...

Machine Tools USA Inc., a woman-owned small business based in Mathews, Virginia, has been awarded a delivery order valued at $210,612.19 for a MACH 200 waterjet cutting system and options. The contract, issued under the General Services Administration Multiple Award Schedule (MAS) without a set-aside designation, is funded by U.S. Pacific Fleet Forces and will be performed at John C. Stennis Space Center in Mississippi. The delivery order carries a firm fixed price and must be completed by...

This is a $1,399,760.00 firm fixed-price definitive contract awarded by the U.S. Army's TACOM Life Cycle Management Command to Advanced Machine & Engineering Co, a for-profit manufacturer of goods and Subchapter S Corporation, for the delivery of a horizontal, carbide tipped circular cut-off saw. The saw will be used for cut-off operations on muzzle and breech end of rotary forged cannon tubes up to 16" in diameter, 40' long, and weighing up to 15,000 lbs at the Watervliet Arsenal in...

<p>Fastcut CNC Inc. was awarded a firm fixed price delivery order against the Department of the Army Materiel Command Contracting Command Rock Island Arsenal for $57,900 to provide a plasma table kit in support of the agency's metal working and machine shop set program. Performance will occur in Ottawa, Ontario, Canada. No set-aside designation was applied to this award to supply equipment supporting the Army's manufacturing training initiatives.</p>

This federal contract award to CNC Engineering Inc., a Connecticut-based provider of FANUC control solutions, was issued by the Defense Logistics Agency (DLA) Aviation. The contract, valued at $397,750.00, is for the retrofit of a G &amp; L 9-axis machining center. The work will take place in Bremerton, Washington. As the prime contractor, CNC Engineering Inc. will provide software, components, diagnostics, and other services to upgrade and optimize the CNC machine. The contract does not have...

Amada America Inc. was awarded a $1.75M definitive contract by the U.S. Army Communications Electronics Command on September 11, 2025, for the procurement and delivery of a Computer Numerical Controlled 12-kilowatt fiber laser cutting machine to Tobyhanna Army Depot in Pennsylvania. This firm fixed-price contract requires Amada America to provide a complete turnkey solution encompassing design, supply, delivery, installation, setup, and operator training services. The equipment must meet...

The Federal Aviation Administration (FAA) awarded a $392,435.20 Firm Fixed Price definitive contract to Aantilia LLC, a Women-Owned Small Business headquartered in Austin, Texas, for the procurement of a Computer Numerically Controlled (CNC) Abrasive Waterjet Cutting Machine. The award was made on February 23, 2026, with an ultimate completion date of June 23, 2026. The contract encompasses purchase, delivery, installation, and comprehensive training at the Mike Monroney Aeronautical Center...

The General Services Administration's Federal Acquisition Service awarded Seva Technical Services, Inc. a delivery order under the company's Multiple Award Schedule contract. This order is to provide eight-inch metal cutting circular saws to support GSA programs. With a period of performance from August 8-16, 2023, the fixed price contract includes economic price adjustment terms. Seva Technical Services will fulfill this order from its place of performance in Newport News, Virginia. Awarded...