Purchase Order FA461017P0012

The Federal Acquisition Service awarded Wright Tool Company, LLC a BPA call valued at $1,178.86 for the supply of thread-cutting taps conforming to American Society of Mechanical Engineers (ASME) B94.9-2008 specifications. The taps are sized at 4 millimeters ISO M with right-hand cutting direction and regular chamfer thread structure. The contract was awarded on January 20, 2026, with an ultimate completion date of January 29, 2026, and was issued without set-aside designation under open...

Wright Tool Company, LLC, located in Warren, Michigan, has been awarded a BPA call under the RC2 Blanket Purchase Agreement for the supply of thread-cutting taps conforming to ASME B94.9-2008 specifications. The specific item is a 16.0 mm ISO metric tap with a 1.5 mm thread pitch in standard straight thread configuration. This fixed-price contract with economic price adjustment provisions carries a ceiling value of $1,541.86 and was awarded on August 6, 2025, with an ultimate completion date...

<p>Eastern Power Technologies Inc. was awarded a delivery order against GSA's Multiple Award Schedule contract to provide tapping tools meeting SAE AS59158 standards. The $0.00 order calls for straight flute plug style taps in size 7/8-14 UNF-3B thread with a pitch diameter of 0. There was no set-aside designation for this order from GSA's Federal Acquisition Service to be completed by November 2022. The delivery location is in Greenville, South Carolina.</p>

The Federal Acquisition Service awarded a $1,318.00 fixed price contract with economic price adjustment to Document Imaging Dimensions Inc. on October 17, 2025, for the supply of thread-cutting taps conforming to American Society of Mechanical Engineers (ASME) B94.9-2008 specifications. The specific deliverable is a standard straight thread tap in 3/8-24 UNF (Unified National Fine) size with a pitch diameter of 0.34 inches. The contract, issued as a call against the RC2 Blanket Purchase...

The General Services Administration (GSA) awarded Wright Tool Company, LLC a firm fixed price purchase order valued at $30,150 to provide taps, thread cutting per American Society of Mechanical Engineers standard B94.9-2008. Performance will take place in Troy, Michigan from July 27, 2023 through October 10, 2023. The contract calls for standard straight thread taps in 12.0 mm size with ISO metric thread pitch measured in millimeters. As the GSA's Federal Acquisition Service supports procurement...

The General Services Administration awarded Kaufman Company, Inc. a firm fixed price purchase order to provide three each of taper taps, plug taps, and bottoming taps in accordance with American Society of Mechanical Engineers standard B94.9-2008. Performance will take place in Norwood, Massachusetts over a period of two months from July 7 to September 20, 2023. The taps will support GSA operations and requirements for threaded fasteners. As a leading provider of industrial tools, Kaufman...

Wright Tool Company, LLC has been awarded a fixed price with economic price adjustment contract valued at $7,262 by the U.S. General Services Administration Federal Acquisition Service to provide 1/4-20 UNC threaded taps cut to American Society of Mechanical Engineers standard B94.9-2008 specifications. The contract was awarded under the GSA Federal Acquisition Service Research Category 2 Blanket Purchase Agreement vehicle, with no set aside designation. Performance will occur in Warren,...

The U.S. Naval Sea Systems Command awarded a $6,400.00 firm fixed-price purchase order to Adept Fasteners, Inc. Innovative Tooling Services Division to supply an air-hydraulic, non-sparking design power unit for use with a Hi-Shear Corporation rivet gun. The award, issued on July 6, 2005, has an ultimate completion date of August 8, 2005. The power unit is described as 17-1/2 inches wide, 39-5/8 inches long, and 25-1/2 inches high, with a 90 PSI operating air pressure. No set-aside designation...

GSA Federal Acquisition Service issued a BPA call to Wright Tool Company, LLC under the RC2 Blanket Purchase Agreement on June 16, 2026, with a ceiling value of $4,610.70. The call procures thread cutting taps conforming to ASME B94.9-2008 specifications, specifically 5/16-18 UNC standard straight thread taps with H3 pitch diameter classification. Performance is in Warren, Michigan, with an ultimate completion date of June 24, 2026. The award carries fixed price with economic price adjustment...

This federal contract award, with an ID of GSMPNEU58415, was issued by the TACOM Life Cycle Management Command, a defense agency, to the prime contractor Howmet Global Fastening Systems Inc., doing business as Howmet Fastening Systems. The contract is for the delivery of pneumatic riveters, with a fixed-price value of $6,927.00 and a completion date of March 5, 2005. Howmet Fastening Systems is a subsidiary of Alcoa Extrusions, Inc. and specializes in providing aerospace and industrial fastening...