Purchase Order FA309922P0021
Award Date 7/29/22
Potential Completion Date 8/30/22
Potential Value $80K
Federal Agency
Awardee
Ultimate Awardee
Not listed NAICS Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Del Rio, TX 78843, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
6
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- The Department of the Air Force Air Education and Training Command awarded a firm-fixed-price purchase order contract for a 3D printer to Technical & Educational Training Aids, Inc. (dba Prototyping Solutions), a small business contractor, on September 13, 2018. The contract has a potential value of $214,672.00 and a completion date of September 27, 2018. The original solicitation was issued as a total small business set-aside. Through prior contract awards, Prototyping Solutions has...
- The Department of the Air Force Air Education and Training Command awarded a firm-fixed-price purchase order to Desktop Metal Operating, Inc., a for-profit manufacturer of 3D printing systems, materials, parts, and services, for the DM STUDIO 3D PRINTER. The potential value of the contract is $155,000.00. The contract has a total small business set-aside designation and the place of performance is Tyndall Air Force Base in Florida. Through past awards, Desktop Metal Operating, Inc. has...
- <p>The Department of the Air Force awarded a $10,800 firm fixed price delivery order to 3D Universe LLC of Algonquin, Illinois on October 1, 2022. The order is for one 3D printer to be delivered by September 30, 2023. The award was made using the Multiple Award Schedule contracting vehicle, with no set-aside designation specified. 3D Universe will provide the 3D printer to the Department of the Air Force under this order to support the agency's engineering and prototyping initiatives.</p>
- The Department of the Air Force awarded a $590,700 firm fixed price purchase order to Open Additive, LLC for a 3D metal printer to meet the requirements specified in the FA860122R0018 solicitation issued by the Air Force Materiel Command Lifecycle Management Center. The solicitation sought proposals for an additive metal 3D printer with a build volume of not greater than 6x6x10 inches and the ability to heat the build plate to 500 degrees Celsius, to be delivered to and installed at the Air...
- The U.S. Air Force Academy (USAFA) Space Systems Research Center (SSRC) awarded a $16,210.00 firm-fixed-price purchase order to Dimetriz Engineering LLC, a self-certified small disadvantaged business, to procure an additive manufacturing (AM) or 3D printer. The printer must have a minimum 15-inch cubic print volume, the ability to print PEEK and PEI/Ultem filaments, a nozzle temperature of at least 300°C, and a minimum layer height. This is a 100% small business set-aside contract under NAICS...
- <p>The Department of the Air Force Headquarters Air Force Academy awarded a purchase order for a STRATASYS FORTUS 450 FDM 3D Printer to High Country Technology Consultants, LLC, a small business. The firm-fixed-price contract has a potential value of $156,030.12 and a completion date of September 30, 2020. The 3D printer is being procured under Section 889 of the solicitation. This contract appears to be a standalone purchase order rather than part of a larger vehicle.</p>
- This firm-fixed-price purchase order for a 3D printer was awarded by the Department of the Air Force Air Education and Training Command to Phoenix Analysis & Design Technologies Inc. (PADT), a small business manufacturer. The contract has a potential value of $239,422.00 and a completion date of October 9, 2020. The solicitation was set aside for small businesses. PADT has previously provided 3D printers, resin removal equipment, and other products and services to various Department of...
- The Department of the Air Force Air Education and Training Command awarded a $22,890.90 firm fixed price purchase order to Dynamism, Inc., doing business as Dynamism CTD, for 3D printers. The contract has a total small business set aside designation and requires completion by September 26, 2023, with performance at Luke Air Force Base in Arizona. As a leading provider of 3D printing solutions, Dynamism CTD will deliver 3D printers to support training programs for the Air Education and Training...
- This is a $249,000.00 firm fixed-price purchase order contract awarded by the U.S. Air Force Academy to 3D Systems, Inc., a for-profit manufacturer of 3D printing solutions, for a high-precision stereolithographic (SLA) 3D printer. The contract does not have a set-aside designation. The 3D printer will be used by the Academy's Department of Aeronautics to rapidly prototype highly accurate models for cadet capstone and research programs. This award was a sole-source contract, as the government...
- The Department of the Air Force Air Education and Training Command awarded a $5,700 firm fixed price purchase order to 3Dcad Printer Inc., doing business as 3D Printer Technology, for LEMAY HPE HARDWARE SUPPORT. The place of performance will be in Montgomery, Alabama. The period of performance is one year, starting September 23, 2023 and ending September 22, 2024. This contract has a total small business set aside designation. 3Dcad Printer Inc. will provide hardware support services to the...