Purchase Order DJF162100P0004944

Inserts & Kits, Inc. was awarded a firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide a tool kit for inserting and extracting helical coil wire screw thread inserts. Valued at $81,950, the contract calls for delivery of tools meeting Society of Automotive Engineers Aerospace Standard SAE AS59158 dated 2007. The tool kit will contain inserts of size 1/4(.250)-20 UNC per Table XIX and allow for insertion and extraction of the...

Inserts & Kits, Inc. was awarded a firm fixed price purchase order by the General Services Administration's (GSA) Federal Acquisition Service to provide a tool kit for inserting and extracting helical coil wire screw thread inserts. Valued at $163.90, the contract calls for delivery of tools meeting Society of Automotive Engineers Aerospace Standard SAE AS59158 dated 2007. The tool kit will contain inserts of size 1/4(.250)-20 UNC per Table XIX and allow for insertion and extraction of the...

This federal contract award is for the procurement of CRIMPING TOOL, TERMINAL, HAND: TYPE I, a hand tool used to produce an indent termination contact in sizes 26 to 12 AWG. The contract was awarded to Giga, Inc., a for-profit organization that specializes in providing tools, hardware, and maintenance supplies to federal agencies. The contract is a Blanket Purchase Agreement (BPA) call under the RC2 Blanket Purchase Agreement, which is administered by the General Services Administration's...

<p>The U.S. Government awarded a $4,357.50 fixed-price with economic price adjustment delivery order contract to Aiconics Inc., a for-profit manufacturer, for electrical inserters and removers. The contract was awarded on March 11, 2005 with an ultimate completion date of April 13, 2005. The place of performance is California, USA. The contract was not set aside for any specific socioeconomic program.</p>

Inserts &amp; Kits, Inc. was awarded a firm fixed price purchase order valued at approximately $328 by the General Services Administration Federal Acquisition Service (GSA) to provide a tool kit for inserting and extracting Helicoil wire screw thread inserts. The tool kit is to be provided in accordance with Society of Automotive Engineers Aerospace Standard SAE AS59158 and will include one extractor, one inserter, one tang break off tool, two taps, and sixty inches of Helicoil thread inserts....

This firm fixed-price purchase order was awarded by the TACOM Life Cycle Management Command, a defense agency, to K.C. Electronic Distributors, Inc., a woman-owned small business. The contract is for the delivery of a manual crimping tool capable of crimping non-insulated Thomas and Betts &quot;STA-KON&quot; terminals on bare copper wires sized 8 through 2 AWG. The tool must have a turning wheel with four nests and an indenter. The contract has a ceiling value of $1,951.60 and a completion...

The General Services Administration Federal Acquisition Service awarded Document Imaging Dimensions Inc. a $118 fixed price contract utilizing the RC2 Blanket Purchase Agreement vehicle. Under this call, the prime contractor will provide crimping tools, specifically Ideal Industries model 30-696, to support GSA operations from July 29 to August 3, 2023 in Yorkville, Illinois. The multi-function crimping tools cut, strip, and crimp modular connectors for telephone wires, consistent with the scope...

<p>This is a firm fixed-price purchase order awarded by the Department of Defense to Yale Electric Supply Company, a child company, for the delivery of a crimping tool for copper and aluminum lugs and connectors. The contract, valued at $1,803.00, has no set-aside designation and was awarded on May 17, 2005 with a completion date of June 19, 2005. The crimping tool is described as manual, compression-operated, and suitable for a range of wire gauges. No major subcontractors are mentioned.</p>

The General Services Administration's Federal Acquisition Service awarded a purchase order valued at $1,648.84 to Norex Group, LLC for a manual crimping tool designed to terminate wires ranging from 0.0201 to 0.0254 AWG. The tool, specified as a Daniels Manufacturing Company GMT221 or equivalent model, measures nine inches in overall length and features a steel construction with oxide coating. This firm fixed-price purchase order was awarded on March 13, 2026, with an ultimate completion date of...

The General Services Administration (GSA) Federal Acquisition Service awarded a $118.08 contract to Document Imaging Dimensions Inc. under the GSA RC2 Blanket Purchase Agreement (BPA) vehicle. The contract calls for the delivery of crimping tools described as Ideal Industries model 30-696, which are multi-function tools capable of cutting, stripping, and crimping wires to accommodate RJ-11 and RJ-45 modular connectors. Performance will take place in Yorkville, Illinois over a five-day period...