Purchase Order AG0208P150009

This firm fixed price delivery order for twenty dollars was awarded by the Defense Logistics Agency Land and Maritime to Independent Rough Terrain Center LLC. To be completed by October 25, 2023, the contract is for the delivery of TEE pipes to support DLA Land and Maritime procurement programs. Awarded on October 18, 2023 and carrying out performance in Schertz, Texas, the contract utilizes no set-aside designation and solely involves Independent Rough Terrain Center LLC as the prime...

This is a firm fixed-price purchase order awarded by the Federal Acquisition Service, a civilian agency, to Lyev, LLC, doing business as MRO Tool Supply, a for-profit limited liability company and manufacturer of goods located in Roseville, Michigan. The contract has a ceiling value of $1,959.60 and an ultimate completion date of October 17, 2025. The award is for a PULLER KIT,UNIVERSA, with no set-aside designation. Based on the vendor's history, the contract is likely for the procurement of...

<p>The Defense Logistics Agency Land and Maritime issued a purchase order to Pioneer Industries, LLC on June 10, 2024, for a pipe reducer valued at $6,528.60, with performance completion by September 20, 2025. Work is performed in Farmingdale, New York. The order carries no set-aside designation and is priced on a firm-fixed basis.</p>

This contract was awarded by the GSA Federal Acquisition Service to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan. The contract is for the delivery of a Mechanical Puller, used for lifting and pulling battery terminal clamps, with an overall length of 5 inches and a width of 4 inches. The puller is made of steel and features a T-handle and two spring-loaded jaws. This contract has a potential value of $10,453.29 and a completion date of October 9,...

The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at approximately $400 to provide a mechanical puller attachment. The puller will have an inside width of 5-7/8 inches, a spread of 1-1/2 to 6-1/8 inches, and a maximum side hole size of 5/8 inch. Eighteen holes will be spaced 9-5/16 inches apart on the device, which features two jaw pullers or floor presses for use with tapped holes. Place of performance will be in...

This is a BPA call contract awarded by the General Services Administration's Federal Acquisition Service to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The contract is for the purchase of a PULLER KIT, UNIVERSAL. It is not a set-aside contract. The contract is issued under the RC2 Blanket Purchase Agreement, which allows federal agencies to procure tools and supplies on an as-needed basis. The contract has a ceiling value of $1,687.65 and an...

The U.S. Government awarded a fixed-price with economic price adjustment delivery order contract to Central Power Systems &amp; Services, LLC (Cps&amp;S) for the supply of a mechanical gear and bearing puller. The contract, valued at $2,647.20, adheres to the requirements outlined in GSA Purchase Description 5120-00-293-1429 dated 05/13/99. The puller consists of a yoke, jaws, slide hammer, and slide rod, with both internal and external gripping capabilities. Cps&amp;S, a for-profit limited...

<p>This is a firm-fixed-price purchase order contract awarded by the U.S. Pacific Fleet Forces (Defense agency) to Flowserve U.S., Inc. for the procurement of PULLER ROD IAW INGERSOLL-DRESSOR PUMP CO. PN 12926B18. The contract has a ceiling value of $1,024.00 and a completion date of July 27, 2005. The contract is not associated with a larger vehicle and does not have a set-aside designation.</p>

This federal contract award is for the procurement of a PULLER KIT, UNIVERSAL by the Federal Acquisition Service, a civilian agency of the U.S. government. The contract, which has a ceiling value of $1,322.47, was awarded to Wright Tool Company, LLC, a for-profit limited liability company based in Warren, Michigan. The contract is a BPA (Blanket Purchase Agreement) call under the RC2 Blanket Purchase Agreement, which allows federal agencies to procure tools and supplies on an as-needed basis....

This is a fixed-price contract awarded by the Federal Acquisition Service (FAS) to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan. The contract, valued at $6,743.22, is for the delivery of PULLER KIT, UNIVERSAL items under the RC2 Blanket Purchase Agreement (BPA). The contract has an ultimate completion date of April 23, 2025 and does not include a set-aside designation, indicating open market competition. Wright Tool Company, LLC has a history of...