Purchase Order 80NSSC26P0978
Award Date 7/9/26
Potential Completion Date 9/3/26
Potential Value $150K
Federal Agency
Ultimate Awardee
Not listed NAICS Category
Federal Contract Vehicle
- Not listed
Set-Aside Type
No Set-Aside Used
Extent Competed
Not Competed under SAP
Major Defense Program
Not listed Pricing Type
Firm Fixed Price
Place of Performance
Lafayette, CO 80026, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed National Interest Action
Not listed Research Type
Not listed Primary Consortia Member
Not listed Similar Awards
- NASA's Shared Services Center awarded a purchase order to Precision Measurements and Instruments Corporation for $45,150 on April 21, 2026, for advanced mechanical testing of fabrics and plastics at cryogenic temperatures. No set-aside applied. Work is performed in Corvallis, Oregon. The order requires mechanical characterization testing—puncture, tear, and tensile testing—of 166 pre-cut fabric and polymer specimens at -143°C in compliance with specified ASTM standards, using a United Testing...
- This is a $24,590.00 firm fixed-price purchase order awarded by the National Aeronautics and Space Administration (NASA) to Experior Laboratories, Inc., a small business contractor, for thermal cycling testing of composite material coupons. The contract is part of NASA's evaluation of candidate materials for composite cryotank applications, requiring the contractor to cycle composite coupons between room temperature and 302°F through liquid nitrogen immersion, per the detailed statement of work....
- The Defense Or Civilian agency Shared Services Center issued a purchase order to Product Evaluation Systems, LLC on June 23, 2026, for high-temperature very high cycle fatigue and tensile testing of hydrogen-resistant and oxide dispersion-strengthened alloys, with a ceiling value of $290,000.00 and an ultimate completion date of January 19, 2027. Performance occurs in Latrobe, Pennsylvania. The Statement of Work requires low cycle fatigue testing at room temperature and up to 2100°F on a minimum...
- NASA's National Shared Services Center (NSSC) awarded a $77,506 firm fixed price purchase order to Danaher Cryogenics Ltd. on January 29, 2025, for a cryostat upgrade at NASA's Goddard Space Flight Center in Boulder, Colorado. The contract, which carries an ultimate completion date of October 31, 2025, involves modifying an existing cryostat to enable testing of large-format microcalorimeter arrays and a continuous adiabatic demagnetization refrigerator. The work comprises four primary...
- NASA's Shared Services Center has awarded a $31,350 firm fixed-price purchase order to Touchstone Testing Laboratory LLC for microtensile and elevated temperature testing of GRX-810 materials in support of NASA Marshall Space Flight Center. The contract, awarded December 9, 2024, with completion targeted for April 30, 2025, was procured through a sole-source Special Notice determination, with no set-aside designation applied. Touchstone Testing Laboratory, based in Scott Depot, West Virginia,...
- The National Aeronautics and Space Administration (NASA) Kennedy Space Center awarded a $429,500.00 firm fixed-price contract to Composite Technology Development, Inc. (CTD) to design, analyze, and fabricate unique 100% composite test tanks for the Tank Health Monitoring Project. The contract requires CTD to produce one 6-gallon prototype nonstructural thermal tank, twelve 6-gallon cylindrical composite tanks, and two 101-gallon tanks. These tanks will be filled with cryogenic liquid nitrogen...
- This is a firm fixed-price purchase order awarded by NASA's National Shared Services Center (NSSC) to Product Evaluation Systems, LLC, a for-profit limited liability company located in Latrobe, Pennsylvania. The $70,830 contract is for cryogenic and elevated temperature mechanical testing of NASA-alloy and oxide dispersion strengthened (ODS) alloy materials. The award stems from a sole source Special Notice issued by the NSSC, which determined that Product Evaluation Systems, LLC is the sole...
- NASA's Shared Services Center awarded a $124.7K firm fixed-price purchase order to Product Evaluation Systems, LLC of Latrobe, Pennsylvania on August 27, 2025, for elevated temperature oxide dispersion strengthened alloy fatigue and tensile testing services. The contract, which carries no set-aside designation, is scheduled for completion by May 27, 2026. Product Evaluation Systems was selected as the sole source provider based on NASA's determination that the company uniquely possesses the...
- NASA's Shared Services Center awarded a $160,000 firm fixed-price purchase order to Product Evaluation Systems, LLC for high temperature oxide dispersion strengthened (ODS) alloy mechanical testing. The contract, effective March 17, 2026 with completion by July 7, 2026, supports NASA's Marshall Space Flight Center (MSFC) in validating material properties for three NASA-developed ODS alloys: GRX-810, ORCAlloy-21, and Alloy 754-ODS. Product Evaluation Systems, a specialized metallurgical testing...
- This is a firm fixed-price purchase order contract awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Cincinnati Testing Laboratories, Inc., a division of Metcut Research Associates Inc. The contract, valued at $29,420.00, is for composite coupon machining services. The work involves mechanical testing of composite materials such as panels and epoxy composites, including services like composite coupon machining, mechanical testing of PAN-pitch/epoxy...