Purchase Order 80NSSC22PC248

This firm fixed-price purchase order contract was awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Cumberland Additive, Inc. (doing business as RTI Directed Manufacturing) for the additive manufacturing of Inconel 718 material test hardware for the CE-13 combustion facilities. The total ceiling value of the contract is $43,966.68, with a period of performance ending on April 11, 2025. The original solicitation was a brand name or equal requirement...

This firm-fixed-price purchase order, awarded to MRL Materials Resources LLC (MRL), a small business, requires the additively manufacture of test specimens from a specialized superalloy powder provided by the National Aeronautics and Space Administration (NASA). The contract, valued at $26,000.00, has a period of performance ending on September 29, 2025. The original solicitation was a special notice published by NASA, seeking a vendor to develop suitable process conditions and print various...

The National Aeronautics and Space Administration (NASA) Marshall Space Flight Center awarded a $214,900.00 firm fixed-price purchase order to Powder Alloy Corp, a small business manufacturer of specialty metal powders, for the delivery of 3,500 kilograms of Inconel 718 alloy powder. This contract award is a small business set-aside and has a completion date of September 4, 2017. Powder Alloy Corp has previously received prime contract awards from other federal agencies such as the Defense...

The National Aeronautics and Space Administration (NASA) Marshall Space Flight Center awarded a firm-fixed-price purchase order to Additive Manufacturing & Engineering, Inc. (a certified HUBZone small business) for the additive manufacturing of large platform GRCOP-42 chambers. The $348,445.00 contract was a total small business set-aside and tasked the vendor with providing a range of additive manufacturing products and services, including GRCOP-42 chambers, calorimeter chambers, igniter...

This is a $86,848.00 firm fixed price purchase order awarded by the National Aeronautics and Space Administration (NASA) to Additive Manufacturing & Engineering, Inc., a HUBZone certified small disadvantaged business, for the additive manufacturing of GRCOP-42 hardware for a combustion test facility. The purchase order was issued on a sole source basis under FAR Part 12 and 13 procedures, as Additive Manufacturing & Engineering, Inc. was determined to be the sole provider of the required...

This is a firm fixed price purchase order awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to General Electric Company, through its GE Additive division, for the purchase of direct metal laser melting alloy 188. The period of performance is 12 weeks from the date of award on September 13, 2019, with a completion date of May 15, 2020. The potential value of the award is $248,700.00. No set-aside designation was used. GE Additive is a manufacturer of...

This is a Cooperative Agreement awarded by the National Aeronautics and Space Administration (NASA) to Auburn University (AU) to investigate the fatigue behavior and failure mechanisms of Inconel 718 parts fabricated using Selective Laser Melting (SLM), a type of additive manufacturing (AM) process. The $105,682.00 contract aims to characterize the mechanical integrity of AM metallic parts, which is currently not well documented compared to traditionally manufactured parts. The research will...

TECH Service Solutions LLC has been awarded a firm-fixed-price purchase order by the Naval Sea Systems Command for $14,858.10 to supply fifteen 12-inch square plates of 0.75-inch thick Inconel 718 alloy and 300 pounds of 0.045-inch diameter Inconel 718 filler wire. This award fulfills a competitive small business set-aside solicitation issued by the Naval Surface Warfare Center Carderock Division seeking the alloy plates and filler wire to support additive manufacturing research under the...

NASA has awarded a firm-fixed-price purchase order to Elementum 3D, Inc., a small business contractor, for the delivery of approximately 750 pounds of NASA Alloy GRX-810 powder. The powder will be used in Laser Powder Bed Fusion (L-PBF) and Directed Energy Deposition (DED) additive manufacturing processes at the Glenn Research Center in Cleveland, Ohio under the Transformational Tools and Technologies project. The contract has a ceiling value of $114,625.00 and a period of performance ending...

This federal contract award, NNX17AD03G, was granted by the National Aeronautics and Space Administration (NASA) to Carnegie Mellon University (CMU) to develop predictive modeling capabilities for microstructure evolution and defect formation in additive manufacturing of Inconel 718 (IN718) parts. The $499,982.76 grant supports research to model porosity arising from keyholing, lack of fusion, and powder particle defects during the printing process, with the goal of optimizing print parameters...