Purchase Order 80NSSC18P0108

The Defense Department's Construction and Equipment division awarded a purchase order valued at $1,240 to Willrich Precision Instrument Company, Inc. on January 20, 2026, for a master ring gage. The contract, which carries a firm fixed price structure with no set-aside designation, is scheduled for completion by March 23, 2026, and will be performed at the contractor's facility in Cresskill, New Jersey. This award represents a straightforward procurement of precision measurement equipment,...

Willrich Precision Instrument Company, Inc., a small business specializing in precision dimensional measurement equipment and metrology services, was awarded a firm fixed price purchase order on July 29, 2025, valued at $1,070.00 for a master ring gage. The contract, which carries no set-aside designation, is funded by the Department of Defense through its Construction and Equipment program and will be performed at the contractor's facility in Cresskill, New Jersey, with completion targeted...

The U.S. General Services Administration (GSA) Federal Acquisition Service awarded a Fixed Price with Economic Price Adjustment contract to Wright Tool Company, LLC, a for-profit limited liability company located in Warren, Michigan, to provide GAGE, TAPER-WIRE-THICKNESS, ENGINEER'S taper gages. This $2,638.17 contract is a Blanket Purchase Agreement (BPA) Call under the RC2 Blanket Purchase Agreement. The gages measure from 1/64 inch to 3/16 inch in 64ths increments, with a 3-inch scale...

This federal contract award is for gage, depth, dial indicating instruments with a range of 0 to 1/8 inch and graduation units of .0005 inch. The dials will be marked 0-25-0 and the instruments will have a base length of 2-1/2 inches and dial face diameter of 2-1/4 inches, within a tolerance of 1/8 inch. The bearing will be a jewel point of 1/2 inch length at a 40 degree included angle. The $393.72 contract was awarded by the U.S. General Services Administration (GSA) Federal Acquisition Service...

This Blanket Purchase Agreement (BPA) under the General Services Administration's (GSA) Federal Acquisition Service RC2 vehicle was awarded to Giga, Inc. to provide film thickness gauges. The fixed price contract valued at approximately $2,870 will deliver rectangular aluminum gauges measuring 2-1/4 by 3-1/4 inches and .034 inches thick, with measuring scales from 1 to 80 mm and 25 to 2,032 microns. Performance will occur in Macon, Georgia over a period of 5 days from September 22 to 27, 2023....

This Blanket Purchase Agreement (BPA) under the General Services Administration's (GSA) Federal Acquisition Service RC2 program is for the delivery of paint film thickness gauges by Giga, Inc. doing business as Giga Inc. The fixed price contract, valued at $14,350, calls for the supply of aluminum rectangular gauges measuring 2-1/4 by 3-1/4 inches and 0.034 inches thick. The gauges have dual measuring scales to indicate thickness in millimeters from 1 to 80 on one side and micrometers from 25 to...

The General Services Administration Federal Acquisition Service awarded Kipper Tool Company a firm fixed price purchase order valued at $37,690 to provide telescoping gauges for measuring internal dimensions. Under this total small business set-aside contract, Kipper Tool Company will deliver steel telescoping gauges with a locking device, knurled handle, and telescoping plunger to measure holes, slots and recesses between 1 1/4 to 2 1/8 inches. Performance will occur in Gainesville, Georgia...

This is a firm fixed-price purchase order contract awarded by the Naval Supply Systems Command (NAVSUP), a defense agency, to Giga, Inc., a for-profit organization, for the supply of an internal indicating gage. The gage is to be used for bench mounting, made of steel, measuring 4.25 inches in length and 1.125 inches in diameter. The contract has a ceiling value of $2,226.55 and a completion date of January 5, 2005. The contract is not set aside and is awarded as part of Giga, Inc.'s Blanket...

This federal contract award is for gage, depth, dial indicating instruments with a range of 0 to 1/8 inch and graduation units of .0005 inch. The dials will be marked 0-25-0 and the instruments will have a base length of 2-1/2 inches and dial face diameter of 2-1/4 inches, within a tolerance of 1/8 inch. The bearing will be a jewel point 1/2 inch in length at a 40 degree included angle. The $393.72 contract was awarded by the U.S. General Services Administration (GSA) Federal Acquisition Service...

The General Services Administration (GSA) awarded Kaufman Company, Inc. a $78,200 purchase order to provide gage, depth, and tire tread calibration ranges from 0 to 1 inch with graduations of 1/32 inch. The indicators will be made of aluminum or chrome-plated brass and include pocket clips, with exceptions. Performance will occur in Norwood, Massachusetts over a period of three months concluding in early December. The firm fixed price contract was awarded through GSA's Federal Acquisition...