Purchase Order 70Z08026PMECP0193
- Not listed
- The U.S. Coast Guard awarded a $253,420.62 firm fixed price purchase order to Guardian Systems LLC, doing business as Guardian Energy Systems, for the procurement of a Caterpillar D-398 engine overhaul kit and associated line bore inspection services for the USCGC BEAR, a Coast Guard vessel homeported in Portsmouth, Virginia. This total small business set-aside contract, designated under NAICS code 336611, requires Guardian Systems to supply original equipment manufacturer components for the...
- The U.S. Coast Guard awarded a purchase order to Coastal Seal Services, LLC, a veteran-owned small business, for shaft seal service on the USCGC Campbell at Curtis Bay, Baltimore, Maryland, in the amount of $24,640.00 on August 31, 2026, under a Total Small Business set-aside. Work is scheduled to begin on or around August 31, 2026, with ultimate completion by October 30, 2026. The scope includes overhauling port and starboard stern tube seal assemblies, inspecting and measuring seat wear,...
- The Coast Guard awarded a $78,950 definitive contract on a firm fixed price basis to Atlantic Fabrication & Boiler Services, Inc. for unplanned dockside repairs to USCGC BEAR (WMEC 901) on September 10, 2026, under a total small business set-aside. The originating market-research notice, posted August 13, 2026 with responses due August 17, describes tank top ballast renewal and preservation work, partial scope, on a medium endurance cutter. Place of performance is Portsmouth, Virginia,...
- The U.S. Coast Guard awarded a purchase order to Coastal Seal Services, LLC, a veteran-owned small business, for $6,490 on July 24, 2026, to perform shaft seal installation and testing on the USCGC Cormorant under a Total Small Business set-aside using simplified acquisition procedures. Work is performed at Curtis Bay Industrial Area, Baltimore, Maryland. The order calls for installation and testing of mechanical and inflatable shaft seals on the vessel, with a qualified OEM Technical...
- The U.S. Coast Guard awarded a total small business purchase order to Coastal Seal Services, LLC valued at $6,290.00 on June 10, 2026 for installation and rebuild of mechanical and inflatable shaft seals on the USCGC Ex-Brant. Work is performed at Curtis Bay, Baltimore, Maryland. The contractor supplies a qualified OEM Technical Representative certified on the Chestern seal system to perform on-site disassembly, reassembly, and installation of seals using government-furnished rebuild kits and...
- <p>The U.S. Coast Guard awarded a purchase order to Atlantic Fabrication & Boiler Services, Inc., a small business, on August 16, 2026, for $87,077 to renew a potable water deionization system for CGC BEAR, with completion due October 2, 2026. The order carries a Total Small Business set-aside. Place of performance is Portsmouth, Virginia.</p>
- The U.S. Coast Guard awarded a $20,180 firm-fixed-price purchase order to Coastal Seal Services, LLC, a veteran-owned small business, to provide on-site technical representative services to renew, vulcanize, inspect, overhaul, test, and align the 18.000-inch propulsion shaft seal aboard the USCGC HOLLYHOCK at the U.S. Coast Guard Yard in Baltimore, Maryland. The work is to be performed by August 1, 2024. This purchase order was awarded under a total small business set-aside, with quotes due by...
- The U.S. Coast Guard has awarded a $38.47K firm fixed-price purchase order to Coastal Seal Services, LLC, a veteran-owned small business based in Lincolnton, North Carolina, for technical services related to the repair, vulcanization, testing, installation, and alignment of the MX9 shaft seal system aboard the Coast Guard Cutter Maple. The award, issued on November 1, 2025, with an ultimate completion date of April 12, 2026, includes a $7.26K funding increase to cover an additional vendor...
- <p>The U.S. Coast Guard (USCG) awarded a $304,276.91 firm-fixed-price definitive contract to Valiant Technical Services Inc. (doing business as Alliance Technical Services) for dockside services for the USCGC BEAR (WMEC-901) in Portsmouth, VA. The contract was set aside for small businesses. The award date was January 16, 2009, and the completion date was March 22, 2009. This contract supports the USCGC BEAR, which is a major USCG vessel program.</p>
- The U.S. Coast Guard awarded a purchase order to Maritech, LLC for $29,255.75 on April 1, 2025, under a Total Small Business set-aside. Performance occurs at Curtis Bay, Baltimore, Maryland. The order covers CGC BEAR pre-, post-, and afloat measurements—vessel diagnostic and alignment services that support operational readiness. The contract is firm fixed price with an ultimate completion date of August 15, 2025. This procurement falls outside the scope of Executive Order implementing the...
The U.S. Coast Guard awarded a purchase order to Coastal Seal Services, LLC, a veteran-owned small business, for inspection and service of the Controllable Pitch Propeller Oil Distribution Box aboard CGC BEAR, with a ceiling value of $65,028.00 and an award date of September 16, 2026. The order is a Total Small Business set-aside under simplified acquisition procedures. Work is performed aboard CGC BEAR (WMEC-901) at Portsmouth, Virginia. The contractor must provide a certified technical representative with demonstrated Escher-Wyss CPP system experience to execute disassembly, cleaning, and inspection of the starboard CPP Oil Distribution box and actuating unit against manufacturer specifications; authorized repairs using government-furnished replacement parts (estimated material cost approximately $21,618); and reassembly with new oil coating. Requirements include maintaining hydraulic system cleanliness, sampling and testing hydraulic fluid before and after work, draining and disposing of existing oil per federal and state regulations, re-servicing with filtered hydraulic oil, and comprehensive post-repair operational testing including pitch checks, filter differential pressure verification, oil temperature monitoring (105–135°F), air-in-system checks, and seal inspections. All shipboard machinery operations are performed by Coast Guard personnel only. Performance period runs September 16–30, 2026. The originating solicitation was RFQ 52000QR260028597, posted September 11, 2026, with quotations due September 14, 2026.
Name | Description | Solicitation Number | FederalAgency | Type | PostedDate |
|---|---|---|---|---|---|
52000QR260028597-CGC BEAR Controllable Pitch Propeller (CPP) Oil Distribution (OD) Box, Inspect and Service | 52000QR260028597 | Department of Homeland Security US Coast Guard | Solicitation 1/1 | 9/11/26, 3:27 PM |
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| Not listed | Not listed | $65.0k | 9/18/26 |