Purchase Order 47QSWA23P0BWH

The Federal Acquisition Service awarded a purchase order to F & M Micro Products Inc., a self-certified small disadvantaged business, on May 22, 2026, for abrasive silicon carbide paper with a ceiling value of $1,089.12. The order calls for 220-grit, A-weight paper backing, waterproof plain flat sheets measuring 9.00 inches by 11.00 inches. Performance occurs in Lake Balboa, California, with an ultimate completion date of July 21, 2026. No set-aside category was applied to this order.

<p>GSA awarded a purchase order contract to Giga, Inc. of Macon, GA for the delivery of 400 grit silicon carbide abrasive paper with a waterproof paper backing. The sheets are to measure 9 inches wide by 11 inches long. The contract has a firm fixed price of nineteen dollars and requires completion by January 18, 2024. No set-aside provisions were applied to this procurement by GSA Federal Acquisition Service for the abrasive paper.</p>

F &amp; M Micro Products Inc. was awarded a firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to provide 600 grit silicon carbide abrasive paper with a waterproof paper backing. The sheets will measure 9 inches wide by 11 inches long. Performance will take place in Lake Balboa, California with an estimated completion date of February 10, 2024. The potential value of this contract is sixteen dollars. No set-aside designation was applied to...

F &amp; M Micro Products Inc. was awarded a purchase order contract by the General Services Administration (GSA) Federal Acquisition Service to provide paper abrasives. The firm fixed price contract, valued at fifty-six dollars, calls for the delivery of silicon carbide abrasive paper with a 320 grit designation. The waterproof, plain, and flat sheeted abrasive paper will measure 9.00 inches in width by 11.00 inches in length and have an A-weight paper backing. Performance will occur in Lake...

This federal contract award is for the procurement of 9-inch by 11-inch, 80-grit, silicon carbide, waterproof, flat abrasive paper sheets. The contract was awarded to F &amp; M Micro Products Inc., a self-certified small disadvantaged business located in Lake Balboa, California. The contract does not have a set-aside designation and is a Blanket Purchase Agreement (BPA) call with a firm fixed price of $2,158. The contract is funded by the Federal Acquisition Service (FAS), a civilian agency...

This purchase order, valued at approximately $119,000, was awarded by the General Services Administration (GSA) Federal Acquisition Service to F&amp;M Micro Products Inc. of Lake Balboa, California. The firm fixed price contract is for the delivery of 500 grit silicon carbide abrasive paper with a waterproof paper backing, cut to flat sheets measuring 9 by 11 inches. Performance will occur at the prime contractor's location in Lake Balboa and span from late June through mid-September 2023. No...

This purchase order, valued at $109.95, was awarded by the General Services Administration (GSA) Federal Acquisition Service to F&amp;M Micro Products Inc. of Lake Balboa, California. The firm fixed price contract is to provide 240 grit silicon carbide abrasive paper backed with waterproof paper sheets measuring 9 by 11 inches. Performance will occur in Lake Balboa and extend from October 18, 2023 through January 16, 2024. GSA utilizes this type of abrasive material to support various...

GSA awarded a firm fixed price purchase order valued at $21,390 to F&amp;M Micro Products Inc. to deliver abrasive silicon carbide paper sheets for agency use. Under the terms of the award, F&amp;M Micro Products will provide 9-inch by 11-inch, 400-grit, waterproof, plain, and flat abrasive sheets with an A-weight paper backing. Performance will take place at the contractor's facility in Lake Balboa, California, and is required to be completed by September 19, 2023. No subcontractors or...

F &amp; M Micro Products Inc. was awarded a purchase order contract by the General Services Administration (GSA) Federal Acquisition Service to provide 500 grit silicon carbide abrasive paper with a waterproof paper backing. The contract has a potential value of one hundred ninety-eight dollars and calls for the delivery of flat sheets of the abrasive paper measuring 9.00 inches wide by 11.00 inches long. Performance will take place in Lake Balboa, California, with all supplies to be delivered...

F &amp; M Micro Products Inc. was awarded a firm fixed price purchase order by the General Services Administration (GSA) Federal Acquisition Service to deliver 600 grit silicon carbide abrasive paper with a waterproof paper backing. The sheets will measure 9 inches wide by 11 inches long and are to be delivered in plain flat form. Performance will take place in Lake Balboa, California with an estimated completion date of February 8, 2024. The potential value of this contract is sixteen...