C--INDEFINITE DELIVERY CONTRACT Medial Repair and Renewal (MRR) A-E SERVICES-Large Business (UNRESTRICTED COMPETITION)
Added: Sep 04, 2012 3:36 pm 1.0 CONTRACT INFORMATION 1.1 General. This contract is being procured in accordance with the Brooks A-E Act as implemented in FAR 36.6. This acquisition will be used to procure highly specialized services required to provide continued Architect-Engineer (A-E) design services in support of the Medical Repair and Renewal (MRR) Program. The MRR program provides quick response to repair/renewal situations relating to the architectural, mechanical, electrical, civil, structural, instrumentation, communications, security, safety, systems, and cost, as well as environmental and hazardous materials abatement areas of Government medical facilities. Sometimes the Government accomplishes the MRR projects tough other design/build contracts; however, some projects will require that an AE prepare a design package (work plan) that will then be executed by a construction contractor under another solicitation. Firms will be selected for negotiation based on demonstrated competence and qualifications for the required work. The U.S. Army Corps of Engineers' Huntsville Center is one of the Army's leaders in studies as well as execution, and partners with the Corps' project delivery teams, regional business centers/divisions, stakeholders and geographical districts to provide expertise and the highest quality research facility, life cycle support to the Department of Defense (DoD), other Federal agencies and foreign governments. In order to accomplish this objective Huntsville Center proposes to award a Multiple Award Task Order Contract (MATOC). The award will be an Indefinite Delivery/Indefinite Quantity (ID/IQ) contract, with a one (1) year base and four (4) one (1) year options; Firm Fixed Price (FFP) task orders will be negotiated. It is anticipated that this acquisition will result in the award of at least tee or more indefinite delivery type contract, with the Government reserving the right to award more, less, or none at all if it is determined to be in the best interest of the Government. Contracts are anticipated to be awarded with FY13 funds. The North American Industrial Classification System code is 541330. The total requirements expected to be awarded under the Medical Repair and Renewal Program on A-E contracts are anticipated to total approximately $25,000,000 over a period of five (5) years. This acquisition is a full and open unrestricted competition. 1.2 In accordance with FAR 36.209, the A-E Contractor and its subcontractors, suppliers, and consultants selected for award will not be considered eligible for DoD construction design-build contracts that relate to any A-E Task Orders awarded under this contract. Potential OCIs are also governed by FAR subpart 9.5. 2.0 DESCRIPTION OF WORK 2.1 Project Information. The Medical Repair and Renewal A-E contracts provide all services required to prepare plans, specifications, work plans and other supporting documents necessary for execution of the MRR projects issued by task order. As part of the design effort the contractor may be required to survey the problem areas, evaluate and recommend solutions. The level of detail and format of the design packages may vary dependent upon the complexity of the MRR project. A complete design, including a bid schedule, an order of work clause, a construction contractor submittal register, quantity and cost estimated, construction cost estimates, a proposed construction schedule, design analyses and calculations, a design document report, an engineering considerations and instructions report, and a draft operations and maintenance manual shall be developed for each project. In addition to project designs the contractor may be required to conduct studies, investigations, surveying and mapping, tests, evaluations, consultations, comprehensive planning, program management, conceptual designs, value engineering, construction phase services, soils engineering, drawing reviews, preparation of operating and maintenance manuals, preparation of parametric estimates, equipment and systems commissioning and other related services. Offerors must have specialized experience and technical competence in medical facility, equipment, and systems design. 2.2 Location of Work. The scope may involve work in multiple locations toughout the Continental United States (CONUS), Alaska, Hawaii, U.S. Territories and possessions, and in identified overseas locations (OCONUS).3.0 SELECTION CRITERIA: The selection criteria for the basic IDIQ contracts are listed below in descending order of importance (first by primary criterion and then by each sub-criterion). Criteria (a) tough (d) are primary. Criteria (e) and (f) are secondary and will only be used as "tie-breakers" among firms that are essentially technically equal. Price will not be used as a criterion. a. Specialized Corporate Experience and Technical Competence: Submit specialized experience and technical competence in medical facility repair and renovation. The contractor shall provide up to five (5) examples of projects that demonstrate recent specialized experience and technical competency in sub-criteria (a) - (g). Recent experience is experience within the last tee (3) years from the date of this announcement.Sub Criteria (a) - Recent experience of the firm and its consultants in design of Medical facilities, Laboratories (research, animal, clinical, Bio Safety Labs (BSL), dental clinics, operating rooms, medical clinics, support functions of medical facilities (power, water, steam), medical storage facilities, and medical transition spaces. Sub Criteria (b) - Experience in adapting standard design packages. The adaptations should demonstrate space conversions (warehouses to clinics for example), working with existing systems in renovating portions of hospitals.Sub Criteria (c) - Rehabilitation of existing medical facilities of various types, sizes, and complexities.Sub Criteria (d) - Application of Anti-Terrorist/Force Protection criteria.Sub Criteria (e) - Specific technical capabilities, such as construction cost estimating, scheduling, value engineering, and materials testing. The technical capabilities should demonstrate the type of equipment or software used.Sub Criteria (f) - Compatibility with specific CAD equipment, and format of required CAD products. The contractor should demonstrate competency with Bentley Microstation CAD software, necessary equipment to run software, USACE A/E/C CADD standards, production of PDF files for advertisement and the ability to convert CAD production source files into fully functional, error free files of AutoCAD and other required CAD products.Sub Criteria (g) - Design quality management approach. Specifically, how will the contractor maintain the quality of the design and cost control. Describe what system is in place, or will be in place at the time of award, to assure the design quality is maintained. b. Professional Qualifications: Identify the professional qualifications and credentials of key personnel in the disciplines shown below that will be necessary for satisfactory performance of the required services. The Government will consider the qualifications, education, overall and relevant experience, and training of licensed, registered, and/or certified key personnel and longevity with the firm of the key management and technical personnel. Resumes (as well as letters of commitment from key personnel who are not currently employed by the prime, sub or JV at the time of submission) shall be provided in SF-330, Section E for all key personnel in the following disciplines: architect, structural engineer, civil engineer, mechanical engineer, electrical engineer, communications engineer, fire protection engineer, hazardous materials specialist, geotechnical engineer, land surveyor, industrial hygienist, safety engineer, interior designer, cost engineer, project manager, and landscape architect. Also provide the resume for a LEED Accredited Professional (AP), which can be one of the personnel listed above. These key personnel must currently be registered in their profession in at least one state. c. Past Performance: Past performance on DoD and other contracts with respect to cost control, quality of work, and compliance with performance schedules, as determined from ACASS and other sources. ACASS is the primary source of information on past performance (DFARS 236.602-1(a)(4)) that the evaluation board will consider. ACASS will be queried for all prime firms. Performance evaluations for any key subcontractors will also be considered. Any credible, documented information on past performance can be considered.The firm may not provide more than five (5) references that best represent the past performance of the prime firm and any key subcontractors on recent (i.e. completed within the past tee (3) years for Large Businesses from the release of this announcement) contracts for projects relevant in size, scope and similarity to the services being procured under this synopsis with respect to cost control, quality of work, and compliance with performance schedules. Projects may include those with the Federal Government, State or local Governments, or commercial customers. Attached to this synopsis is a Past Performance Questionnaire (PPQ) (Attachment 1). The submitting firm is responsible for forwarding the questionnaire to each past performance reference submitted under this synopsis. Firms should complete Blocks 1-4 of the PPQ and the client/customer complete Blocks 5-8 and the evaluation survey. The client/customer should return the PPQ to the firm to be submitted with the SF330. The Government will not accept the PPQ as a separate package from the SF330. Each contract reference will be evaluated to determine if it is relevant and recent, and if so, the quality of the firm's past performance will be assessed. d. Capacity: Demonstrate capacity or firm's ability to make available an adequate number of interdisciplinary teams to accomplish at least five (5) task orders simultaneously, with task order values ranging from $100,000 to $1,000,000 each. Demonstrate capability to perform work toughout the Continental United States (CONUS), as well as Outside the Continental United States (OCONUS). Firms should demonstrate their capability to perform work in multiple geographic locations. Greater consideration will be given to the A-E firms with the capability to perform work in diverse locations rather than only having experience in one geographic area.SECONDARY SELECTION CRITERIAe. Small Business Participation Plan: Extent of participation of small businesses (SB), small disadvantaged business (SDB), historically black colleges and universities (HBCU), and minority institutions (MI) in the proposed contract team, measured as a percentage of the total anticipated contract effort, regardless of whether the SB, SDB, HBCU, or MI is a prime contractor, subcontractor, or joint venture partner, the greater the participation the greater the consideration.Table 2: USACE small business subcontracting goals for FY12Small Business Category % Total Acquisition ValueSmall Business 20%Small Disadvantaged Business 4%Woman-Owned Small Business 3%HUBZone Small Business 3%Service-Disabled Veteran-Owned Small Business 3%f. Volume of work: Volume of work awarded by DoD during the previous 12 months, with the objective of effecting an equitable distribution of DoD A-E contracts among qualified firms, including small businesses and small disadvantaged businesses.5.0 SUBMISSION REQUIREMENTS: Offerors must be registered in the System for Award Management (SAM) to be eligible for award. Firms may register via the SAM internet site at http://www.sam.gov. SF-330 submissions will be received until 1400 (2:00 pm) Central Time on 5 October 2012. Interested firms having the capabilities to perform the work described above must submit seven (7) hard copies and one (1) PDF copy on a compact disk (CD) of the SF 330 Part I and SF 330 Part II for the prime firm and subcontractors or JV (Joint Venture) Partners to the Contract Specialist as follows: US Army Engineering and Support Center, CEHNC-CT-S, ATTN: Mr. John Kirkwood, 4820 University Square, Huntsville AL 35816-1822. All hard copy submissions shall be identical in content. The SF 330 Part I shall not exceed 50 pages (8.5" x 11"), including no more than 5 pages for Section H. Each side of a sheet of paper is considered one page. Use no smaller than 12 font type. However, firms may use no smaller than 10 pt font on organizational charts, graphs, tables and matrices. Include the firm's DUNS number in the SF 330, Part I, Section H. In Section H, indicate the estimated percentage of involvement of each firm on the proposed team. Facsimile transmissions will not be accepted. Solicitation packages are not provided and no additional project information will be given to firms during the announcement period. Any JV Partnership must submit incorporation paperwork as a part of the package. This paperwork will not be included in the page count and should be provided as an attachment. This is not a request for proposal. Awards are anticipated to be made in the Spring of 2013 or later. Point of Contact (POC)John C. Kirkwood, 256-895-1793john.c.kirkwood@usace.army.milTonju L. ButlerContracting OfficerTonju.l.butler@usace.army .milPotential Offerors are to post questions at www.projnet.org using bidder inquiry keyTGWS9S-BQP2FD. The deadline for posting questions is 1400 (2:00pm) Central Time, September 18, 2011.Place of PerformanceContractor's facilities and project sites OCONUS & CONUS toughout the United States, including Alaska, Hawaii, and all U.S. Territories. W912DY11R0032 Department of the Army Corps of Engineers Engineering Support Center Huntsville
9/4/12, 3:36 PM Architect-Engineer design services in support of the Medical Repair and Renewal Program.
Added: Aug 18, 2011 4:55 pm This is a SOURCES SOUGHT notice. The Government is seeking to identify qualified sources under North American Industry Classification System (NAICS) 541330 (Engineering Services). This synopsis is for market research purposes only and IS NOT A REQUEST FOR PROPOSAL (RFP) AND IS NOT A REQUEST FOR A STANDARD FORM 330 nor does it restrict the Government as to the ultimate acquisition approach. The Government will not reimburse respondents for any costs incurred in preparation of a response to this notice. The U.S. Army Corps of Engineers, Engineering and Support Center, Huntsville is seeking capability statements from firms interested in proposing on an Indefinite Delivery type service contract for Architect-Engineer (AE) design services in support of the Medical Repair and Renewal (MRR) Program. Any contracts awarded are being procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6 and Engineering Pamphlet (EP) 715-1-7. The MRR program provides quick response to repair/renewal situations relating to the architectural, mechanical, electrical, civil, structural, instrumentation, communications, security, safety, systems, and cost, as well as environmental and hazardous materials abatement areas of Government medical and other facilities. The U.S. Army Corps of Engineers; Engineering and Support Center, Huntsville anticipates a multiple award of up to tee Indefinite Quantity Architect- Engineer contracts with a one (1) year base period with four (4) one year option years for a total five (5) year contract and an estimated program value of $24.5M. The Huntsville Center, Corps of Engineers, intends to solicit and award multiple indefinite delivery contracts for architectural/engineering services for MRR projects. It is the Government's intent to explore whether this acquisition should be a restricted small business set-aside. As a result, the Government is performing market research in order to determine whether small businesses possess the capability to execute the requirements within this acquisition. Respondents need to indicate all small business designations (small business, 8(a), certified HUBZone, women-owned and/or Service Disabled Veteran Owned). Interested small business firms who meet the capability requirements identified in this notice are requested to reply to this e-mail with a response to the requirements presented below. If no experience or capabilities are associated with a particular requirement, so indicate. Based upon small business responses received, consideration will be given to determining if the acquisition will be set-aside for small business competition.The objective of this contract is to provide technical support and designs for Government medical facility repair/renovations in support of the MRR program. Specific requirements are expected to include, but will not be limited to medical facilities related services such as the preparation of design criteria, architectural and engineering designs, specifications, evaluations, analyses, studies, economic analyses, consultations, comprehensive planning, program management, value engineering, construction phase services, investigations, surveying, mapping, testing, construction inspection services, preparation of operating and maintenance manuals, equipment and systems commissioning, and other related services for medical facilities, including medical administrative and training facilities. Additional support may include environmental documentation, permits, special studies, and other environmental activities as required by federal, state and local laws and regulations; feasibility studies, other special studies, investigations, programmatic support services, as-builts, Construction management and engineering/design changes during medical construction.Minimum requirements of sources: Potential sources for performance of the support services shall be fully qualified in providing A-E services related to medical facility repair/renovation:1. The contractor shall have the capability of performing multiple task orders simultaneously in various geographic locations.2. The contractor shall have the capability of performing work in the required geographic locations including, but not limited to the Continental United States (CONUS), Alaska, Hawaii, U.S. Territories and possessions, and in identified overseas locations (OCONUS) (e.g. Kuwait, Qatar, UAE, Yemen, Iraq, Saudi Arabia, Egypt, Kazakhstan, Afghanistan, Japan, Korea, Germany, Kwajalein, Italy, Bosnia-Herzegovina, Albania, Poland, Serbia, Hungary, Macedonia, Belgium, Thailand, Turkey, England)..3. The contractor shall demonstrate the capability, knowledge, and qualifications to perform the work required under this contract at Government medical facilities in accordance with all applicable medical technical publications, codes, and specifications.4. The contractor shall demonstrate the capability and qualifications to provide A-E services for medical facilities and related projects involving various issues and requirements, such as safety and health (OSHA), The Joint Commission (TJC), Infection Control, unique military medical considerations, Force Protection, Asbestos, Lead Base Paint, as well as Hazardous Material and Hazardous Waste (to include medical waste).5. The contractor shall have established a satisfactory record of experience and completion of similar medical facility contracts and will demonstrate sufficient equipment, personnel, organizational, financial, and technical capability to ensure satisfactory completion of the contract. 6. The contractor shall have the capability and qualifications to provide Quality Assurance over the medical construction contractor's quality control process using the Corps of Engineer's quality assurance procedures as identified in ER 1180-1-6 (Contracts Construction Quality Management).Interested firms must provide a brief capability narrative demonstrating the firm's experience and qualifications with similar medical A-E services as indicated above, as well as the prime contractors name, DUNS number, size/status (8a, SDVOSB, HUBZone, etc.), address, point of contact phone number and email address. Submit responses via email to paul.c.daugherty@usace.army.mil. The email subject line shall be "MRR AE Capability Narrative". Submission should be received by 19 September 2011 and should not exceed 5 one-sided, 8 1/2" X 11" pages. NO HARD COPY OR FACSIMILE SUBMISSIONS WILL BE ACCEPTED. Cover letters and extraneous materials (brochures, SF330, etc) will not be considered. Questions concerning submissions should be directed to Paul Daugherty, Contract Specialist at 256-895-1697 (paul.c.daugherty@usace.army.mil) or Tonju L. Butler, Contracting Officer at 256-895-1166 (Tonju.L.Butler@usace.army.mil). Personal visits for the purpose of discussing this announcement will not be scheduled. W912DY-11-R-0032 Department of the Army Corps of Engineers Engineering Support Center Huntsville
8/18/11, 4:55 PM